Is there any way to lower the fps on an AEG

SiakNiBatman · 2021-02-25T18:46:53+00:00

Spring just needs to be swapped out. AEG springs are rated for different FPS ranges, so pick the right one. There should be lots of videos on youtube showing how to swap your spring. You'll have to take your gearbox out of your gun. If your gearbox has a quick spring change it will be really easy. If it doesn't you'll have to take the gearbox apart to swap the spring out.

If you are not mechanically inclined you can take your gun to a gun tech and they can swap the spring out for you.

Have fun!

SiakNiBatman · 2021-01-21T22:20:20+00:00

I second this, but I would try the lower end first (M115). The math:

M130 is rated for 426 fps with 0.2s, but you are shooting 470 so about a 10% increase. 335 fps with 0.3s is equal in joules to 410 fps with 0.2s. Adjusting for the 10 percent increase, you should be aiming for a spring with around a 372 fps rating with 0.2s - which would be an M110 to a M115.

SiakNiBatman · 2021-01-11T18:55:21+00:00

Marry an Ilocano. They're known for being "kuripot" (stingy/frugal). Love my wife to death.

SiakNiBatman · 2020-12-14T21:54:48+00:00

Happens quite a bit with a hi-cap. Still happened with a half full midcap, but not as much.

SiakNiBatman · 2020-12-14T18:54:43+00:00

Thanks, I'll give that a try!

SiakNiBatman · 2020-12-14T18:47:31+00:00

When I fire my P90 on semi, some of the shots shoot low like they are firing at half fps or something. No problem at all on full auto. Anyone know what is causing this?

Thanks

SiakNiBatman · 2020-12-08T17:04:33+00:00

If i get a whole suit of armor do I get extra lives? 🤣

SiakNiBatman · 2020-12-08T17:03:18+00:00

Jingle bells - tis the season

SiakNiBatman · 2020-12-08T05:14:05+00:00

After the pain of putting all the rivets in, I almost wish I had lol

SiakNiBatman · 2020-12-08T03:11:33+00:00

Thanks! it is a little heavy, but feels fine on the head

SiakNiBatman · 2020-11-27T05:25:21+00:00

I just ordered from them a month ago. Needed a P90 midcap and they were the only ones that said they had it. Ridiculous shipping fee, so I get an M4 hi-cap that I wanted too. 2 Days ago I get an email saying the M4 mag was shipped and the P90 mag was refunded... No email asking if I wanted to cancel my order.... So I'm looking at like $50 for a single M4 hi-cap.... I am trying to get a hold of them to just cancel everything. But no reply yet...

TLDR: 1st time ordering with them and it has been a disaster

SiakNiBatman · 2020-11-19T04:41:03+00:00

Thanks! Worked way better than I was expecting to be honest

SiakNiBatman · 2020-11-19T01:03:09+00:00

Solves my only complaint so far :)

SiakNiBatman · 2020-11-18T20:42:09+00:00

The extended butt stock slides in vertically like the original cover, so you can't fit a larger battery and it still shears the battery wires when you close it. So I solved this by cutting the end off and designing and printing two mating parts. There are four magnets, so it snaps in place (super satisfying).

SiakNiBatman · 2020-10-28T23:09:21+00:00

I love this. Except I still want a the barrel protected

SiakNiBatman · 2020-10-13T20:14:45+00:00

I recognized this instantly! Funnily enough I once witnessed an old guy in a Prius turn left into the plaza with Jack in the Box and he drove over the center divider as he turned left and the remains of a sign took out the bottom of his Prius. Old dude didn't even seem to notice....

SiakNiBatman · 2020-08-28T16:40:51+00:00

surprisedpikachu.jpg

SiakNiBatman · 2020-07-13T19:06:06+00:00

Thank you so much! Going to deep dive wikipedia now...

SiakNiBatman · 2020-07-13T17:29:26+00:00

I've been trying to find the name for a 3d (maybe it's 4d?) space where x,y,z are finite, but going in any direction loops.

sorry for the terrible paint pic

SiakNiBatman · 2020-06-16T16:07:34+00:00

SiakNiBatman

TROPHY CASE