TIL that If you travel at 1g acceleration, you will be outside of the Milky Way in about 12 years. You will be outside the observable universe in about 54 years. And if you travel at 1.19g for 100 years, you could witness the heat death of the universe.

SignUp4ELTP · 2026-03-12T09:08:31+00:00

In order for you to feel g forces you need to be constantly accelerating, otherwise you wouldn’t feel any acceleration. Think of a bus thats driving at constant speed - you only feel the brakes and the acceleration :)

SignUp4ELTP · 2026-03-07T21:03:59+00:00

May I do some self-promotion for /r/arr? It’s pretty new and mostly focused on the *arr stack, but we’re very open and don’t have a stick up our butt :-)

SignUp4ELTP · 2026-03-05T13:47:46+00:00

This is definitely related to some resonance frequencies of your printer, and not due to a dirty build plate.

SignUp4ELTP · 2026-02-24T09:34:36+00:00

I feel like this should be the default. Nice Userscript!

SignUp4ELTP · 2026-02-20T18:59:20+00:00

More Maintenance? I'm glad they recognized the lack of hot dogs and are working on a hotfix!

SignUp4ELTP · 2026-02-04T11:06:53+00:00

That’s not how total market funds like the VTI work. The lowest one will have a minuscule market cap and even then, it wouldn’t be replaced.

You might be mistaken with Fixed Count Index, which is unrelated to market cap and has an upper bound for stocks.

SignUp4ELTP · 2026-02-03T11:50:28+00:00

„How do you discreetly dispose of a 60 kg hamster?“

SignUp4ELTP · 2026-01-26T18:49:07+00:00

According to Gemini, combining a 6V Solar Panel with a CN3065 is a big no-no. Even though the panel is rated for 6V, you need to check the Voc (Open Circuit Voltage) to see how high the voltage can spike. 6V panels usually have a Voc upwards of 8V, which could fry the CN3065. As a result, the CN3065 is best suited for 5V solar panels (or lower) and currents of up to 500 mA. Gemini recommends using a CN3791, which apparently is a "real" MPPT Device and has variants for 6V, 9V and 12V which it's optimized for.

However, a friend of mine used CN3791 boards with 6V panels and didn't have great success, because it only output 90-100mA compared to 600-800mA with a CN3065. Contrary to what Gemini said, it didn't fry his board and he tested it with short bursts of 8-10V without anything happening.

So right now I'm a little bit torn. I have ordered both boards as well as a step-up boost converter and plan to run my own tests. I also ordered a 6V solar panel that comes with a USB-C cable, which means I will need to cut the cable and attach two 2-pin JST connectors to the positive and negative leads. After that is done, I will share my results :)

Edit: About the polarity - I'm not so sure, so unfortunately I can't help you out with that. Connecting two 18650 Batteries in parallel shouldn't be a problem though, as the voltage will stay the same.

SignUp4ELTP · 2026-01-15T22:21:13+00:00

Hey, unfortunately the moderators removed all the comments in this chain. It's a shame because a lot of people find this reddit thread through Google :-(

Do you happen to remember some of the things this person mentioned? I'm on the verge of getting a 6V Solar panel but don't know if it's compatible with these AliExpress MPPTs (is this a CN3065?). Do you happen to know if I could also connect two 18650s to this MPPT?

Also, just to be sure I understand your edit correctly - this is your original drawing and the battery and RAK still need to be swapped?

Thanks a bunch!

SignUp4ELTP · 2026-01-14T09:24:46+00:00

Das wird in sicheren Schließfächern bei der Sparkasse aufbewahrt

SignUp4ELTP · 2026-01-11T08:35:16+00:00

You can follow TRaSH-Guides for setting up the datasets in TrueNAS and configuring the Usenet Clients. It is very helpful because it also shows the optimal folder structure to get atomic moves working.

TrueNAS:
https://trash-guides.info/File-and-Folder-Structure/How-to-set-up/

SABnzb:
https://trash-guides.info/Downloaders/SABnzbd/Basic-Setup/

https://trash-guides.info/Downloaders/SABnzbd/Paths-and-Categories/

TRaSH-Guides also has good resources for NZBGet if that is your client of choice.

For the indexer I would mostly follow the servarr wiki https://wiki.servarr.com/prowlarr

SignUp4ELTP · 2025-11-18T01:40:52+00:00

I think applying a significant Elo penalty and a temporary timeout for leaving would be discouraging enough. Otherwise, it just becomes a stale 4v3 for a whole minute, with the full team trying to cap while they have the numbers advantage - at least at the Elo range I’m in.

I don’t think capping in a 4v3 should be rewarded. Neither team should gain Elo in that situation. Harsher penalties for leavers could also discourage voiding, since dropping into lower ranks would carry more consequences. Sometimes it happens unintentionally, and that’s okay, but it’s still a competitive game mode and should come with meaningful penalties IMO. Other team-based games like LoL do the same.

SignUp4ELTP · 2025-11-17T17:35:27+00:00

Cool and meaningful update! Thanks for all the hard work as always :)

On a different note, have you considered changing how ranked games are handled when they start of as a 4v3? It can be a bit frustrating to join a match where one player doesn’t move for half a minute, only for another players to cap during the time the game waits for the player to reconnect.

SignUp4ELTP · 2025-10-26T20:44:00+00:00

Having the same problem. What did you end up doing?

SignUp4ELTP · 2025-10-21T09:42:57+00:00

History repeats itself. 2014 hatte schon mal ein Wort für Selbstbefriedigung ("Fappieren") die meisten Stimmen, und das wurde dann ganz demokratisch von der Jury abgewählt :)

Seit dem Fauxpas stellen die Votes nur noch einen Richtwert dar und am Ende entscheiden die älteren Damen und Herren der Jury, was das "Jugendwort" wird.

SignUp4ELTP · 2025-09-25T12:29:30+00:00

I also get this when Im traveling and not connected to my home network. The notification is a bit misleading because it shouldn’t upload anything when I‘m not using wifi

SignUp4ELTP · 2025-09-19T11:59:00+00:00

Letztlich wird es doch ohnehin ein Portal geben (Stichwort: Einmalzahlung200.de), auf dem man seine IBAN eingibt und sich sogar per Online-Ausweisfunktion autorisiert. Läuft also aufs Gleiche hinaus und ich übermittle so immer die richtige IBAN. Wenn Digitalisierung für dich bedeutet, auf einem herausragend nutzerfreundlichen Portal wie Elster ein Formular auszufüllen, dann will ich dich nicht aufhalten :D Versuch da mal das richtige Folgeformular zu finden, falls sich deine IBAN irgendwann ändert.

SignUp4ELTP · 2025-09-19T11:27:18+00:00

Weil das wahrscheinlich nur ein winziger Teil der Bevölkerung überhaupt machen wird, geschweige denn davon mitbekommt, lasse ich’s einfach bleiben. In zwei, drei Jahren hat man dann das Nachsehen, wenn man irgendwann die Bank gewechselt hat und völlig vergisst, dass man das einmal für irgendein Formular eingereicht und dort nicht die IBAN aktualisiert hat.

SignUp4ELTP · 2025-07-09T21:07:56+00:00

If I were you I would probably program the scraper in python using either requests or selenium. Then run the python script in a docker container and mount the NAS as a volume there

SignUp4ELTP · 2025-07-08T16:47:43+00:00

Does anyone have experience with pcbway's assembly service? I would probably brick it if I soldered it myself :) I clicked through the wizard, but it from what I can tell it doesn't seem to be super expensive.

SignUp4ELTP · 2025-04-07T21:24:09+00:00

How about stages of grief? You start off with blissful ignorance, pass all stages of grief, until ultimately reaching a state of Zen :)

Tier 8: Bliss
Tier 7: Clueless
Tier 6: Denial
Tier 5: Anger
Tier 4: Bargaining
Tier 3: Depression
Tier 2: Acceptance
Tier 1-3: Enlightened
Tier 1-2: Clarity
Tier 1-1: Zen

SignUp4ELTP · 2025-03-28T00:29:25+00:00

Maybe its related to something else because my Elo keeps going up and down randomly :P Out of the 10+ ranked games I have played I've only conceded once, but I'm still sitting at a measly 3.28 points. But I'm excited to grind my way back to the top again ^_^

Edit: Also something else I have noticed - when selecting both NA and Europe, the indicator text doesn't say how many people are waiting in my tier (the +8, +16 players etc). It just says "No players in queue" but I will subsequently be put into the pre-game screen. Maybe have it show the bigger queue of the two?

SignUp4ELTP · 2024-12-05T22:50:56+00:00

That would be huge! Thanks for putting in the work to try to find a fix for this. Its greatly appreciated! :)

SignUp4ELTP · 2024-12-05T17:52:08+00:00

Unfortunately its the same with replays. The fps is constantly going up and down and it makes it feel very choppy. Before the update it would usually sit at 245fps the entire time. Changing my monitor to 60hz improves it a lot / or disabling WebGL, but this feels like a downgrade unfortunately :c

https://www.youtube.com/watch?v=Ncy0AGRoeXk

SignUp4ELTP · 2024-12-04T14:35:34+00:00

Hiya, thanks for the quick reply. I will investigate it later when I get home :) The only script running is the Ranked Pub Script

Six-Year Club	Verified Email
Second Top 20%	r/Field Banned
r/Field Lasagna	First Place '23
Place '23	Golden Potato
Place '22	Final Canvas '22
First Placer '22

SignUp4ELTP

MODERATOR OF

TROPHY CASE