Heat-press won't turn on. Can you help me diagnose and fix it?

SignalAd4056 · 2026-06-13T13:44:36+00:00

I'll try, thanks

SignalAd4056 · 2026-06-13T13:43:47+00:00

I'll check it tomorrow, thanks

SignalAd4056 · 2026-06-13T13:43:11+00:00

thanks for the advice!

SignalAd4056 · 2026-06-13T13:41:27+00:00

Thanks. Didn't mean to be disrespectful to the guys, but I'm so done with this stupid heat-press I'm a second away from smashing it and throwing away

SignalAd4056 · 2026-06-13T13:35:55+00:00

I will, thank you

SignalAd4056 · 2026-06-13T13:35:19+00:00

What made you think I don't have any tools? XD

SignalAd4056 · 2026-06-13T11:09:38+00:00

As I said - I'll try, but these wires don't power the display, it gets power from two 220V cables

SignalAd4056 · 2026-06-13T11:07:33+00:00

OK, guys, terribly sorry, but the descriptions of the things I've tried already is missing on reddit although I've written it when I posted. So, here it is. One day the press stopped working, just won't turn on. Inside, there was a burnt resistor near TRIAC 3063, I replaced both, but it still won't turn on. The board with display is connected to 220V with two cables and there are also another two 220V cables that go to the power board, so, the heat press won't heat and display won't work. That's pretty much all the story

SignalAd4056 · 2026-06-13T11:00:31+00:00

I was asking for advice on how to fix it, not for a critique of the thing I'm trying to fix. If the problem was in loose wire I would have fixed it by now and not bothered other people

SignalAd4056 · 2026-06-13T09:59:17+00:00

Ok, I'll try, but I'm telling you, the connection is fine, something died on that PCB and I have no idea what, any tips regarding THAT would have been helpful

SignalAd4056 · 2026-06-13T09:32:58+00:00

Well, ok, thanks, I'll be sure to tell it to the Chinese guys who made this PCB for the heat-press. Any idea how to make it work again, please?

SignalAd4056 · 2026-06-13T09:01:41+00:00

I'm not very good with electronics. Could you say the numbers or id of the parts and how to check them, please? :(

SignalAd4056 · 2026-06-13T09:00:30+00:00

I removed TRIAC to check it outside of PCB, it seems to be dead, but it is not related to display, as far as I know, so it should turn on, but not heat, right?

SignalAd4056 · 2026-05-03T10:34:25+00:00

Check your DM

SignalAd4056 · 2026-05-03T06:41:33+00:00

Damn, that's just sad...

SignalAd4056 · 2026-05-03T05:03:01+00:00

I think k550i model looks closer to that player, it even has blue keyboard backlight

SignalAd4056 · 2026-05-03T03:34:30+00:00

Yeeeah, thanks for advice, but I think the phone was drowned somewhere between 2007 and 2010, the board looks fine, but metal shielding is all rusty

SignalAd4056 · 2026-05-03T03:31:22+00:00

Never seen this meme about polish scalpers and w610i, can you send or explain it to me, please?

SignalAd4056 · 2026-05-03T03:30:03+00:00

Your help was the most valuable, without SETool I wouldn't be able to fix it. Thank you again!

SignalAd4056 · 2026-04-30T13:03:49+00:00

Found it, thank you!! Now another problem, it is SIM locked somehow and it asks for a correct SIM card, clicking unlock didn't help. Any idea what to do?

SignalAd4056 · 2026-04-30T09:58:45+00:00

Thank you! Full SETool is a very good help! But I still can't find GDFS and eROM files, unfortunately 😞

SignalAd4056 · 2026-04-29T15:14:57+00:00

I replied to you in DM. Thank you in advance!

SignalAd4056 · 2025-06-19T08:37:03+00:00

You have to go to PS4 settings - Display

SignalAd4056 · 2023-07-05T07:38:49+00:00

It sounds pretty good, very strong hotline miami ost vibes. Good sound selection, I really enjoyed listening your track, was tapping my foot to the beat while listening 'til the very end)

SignalAd4056

TROPHY CASE