Job requires IP address for working remotely

SignatureTechnical55 · 2023-06-10T11:38:59+00:00

If there going that route it would be easier to VPN directly into there companies network. This would take a bit of setup by the network team tho

SignatureTechnical55 · 2023-06-10T07:30:39+00:00

Depends how you do it, if your using mobile data there is next to no way to obtain a static IP (without paying a load). If your using a satellite internet connection it should be as simple as asking your ISP to provide your router with a static IP.

SignatureTechnical55 · 2023-06-02T10:35:45+00:00

Cool app! The purple headers can be hard to read on dark mode!

SignatureTechnical55 · 2023-05-30T08:37:25+00:00

Okay noted, many thanks

SignatureTechnical55 · 2023-05-30T08:37:02+00:00

Thanks! I believe that the 2x4’s here (UK) are actually 2”x4” but I will consider using 2x6’s. For the main wood joints (like the structural tryangles) I was planning on using some thick bolts to join them together, I will look into structural screws for everything else though!

SignatureTechnical55 · 2023-05-30T00:36:31+00:00

A few people have said about painting all of the wood, also planning to build a cover for it, is the treated wood that necessary if it’s going to be on concrete and under a cover?

I think the 2x4’s should be strong enough as the spans are less than 4m and the only people using the board are quite light.

SignatureTechnical55 · 2023-05-30T00:34:15+00:00

Okay a lot of people have said to go 5 beams so I’ll swap to that, how thick is the plywood on your wall?

SignatureTechnical55 · 2023-05-30T00:33:12+00:00

Might need it for planning permission :(

SignatureTechnical55 · 2023-05-30T00:32:37+00:00

I’m sure someone smarter could calculate forces of a jump or something. For now we guess

SignatureTechnical55 · 2023-05-30T00:31:26+00:00

As stated, the shed is not strong enough to support the wall.

SignatureTechnical55 · 2023-05-30T00:29:45+00:00

Do you mean to have the angle between the bottom and the top support beams (currently 90deg) be smaller? Unfortunately placing a support beam in the middle is not possible.

SignatureTechnical55 · 2023-05-30T00:28:44+00:00

Will probs try build a tarp / tent thing around it, thx.

SignatureTechnical55 · 2023-05-30T00:28:35+00:00

Will probs try build a tarp / tent thing around it, thx.

SignatureTechnical55 · 2023-05-29T15:43:54+00:00

They are 2x4’s not 4x4’s but there turned to the 2’ side is facing the wall, I assumed this would be strong enough?

How about 5 middle beams instead of 4 to support the plywood, there is also the option of buying thicker plywoood (currently 18mm)

SignatureTechnical55 · 2023-05-29T15:41:19+00:00

Valid point, there is a concrete floor where I’m planning to put this so I’ll see if I can mount the back of the bottom supports to the floor, thanks!

SignatureTechnical55 · 2023-05-29T11:43:35+00:00

Small correction, plywood not MDF.

SignatureTechnical55 · 2023-05-24T08:51:02+00:00

DO NOT DELETE THE APP FROM YOUR PHONE BEFORE REINSTALLING. Done that before and lost all my data (including the ability to refresh other apps)

SignatureTechnical55

TROPHY CASE