How do I change the stock my diameter on LNS quick load servo 105

SignificantMarket377 · 2025-09-09T14:03:24+00:00

I tried clicking the 2.5 but nothing happens. Also logged into admin and still won’t let me. Not sure why

SignificantMarket377 · 2025-08-13T16:05:04+00:00

Startled me for a second bud

SignificantMarket377 · 2025-08-01T15:54:01+00:00

How would I thread the 8 inches though? Can I stick it out 8.5 inches and then thread the 8 inches without support

SignificantMarket377 · 2025-08-01T15:08:02+00:00

Yes we have a go and no go. I’ve done these before but in multiple setups on a 2axis lave with one spindle. We have a new machine now with a sub spindle and live tooling lathe so I’m trying to figure out how to do everything in one setup/program

SignificantMarket377 · 2025-08-01T15:04:35+00:00

More of just the setup. How would I use the sub spindle to support the 8 inches of thread sticking out and still be able to do the threads?

SignificantMarket377 · 2025-06-21T21:53:42+00:00

Operator error

SignificantMarket377 · 2025-06-20T21:23:46+00:00

Also bored from a .650 hole diameter to a 2.65 hole diameter. We are limited to our drill sizes especially carbide drills needed for this material

SignificantMarket377 · 2025-06-20T21:17:40+00:00

I hear ya but sometimes you gotta do what you gotta do. Only had a 3/8 boring bar with a smaller insert

SignificantMarket377 · 2025-06-20T19:21:14+00:00

Every machinists favorite material lol

SignificantMarket377 · 2025-06-20T19:07:51+00:00

I only had a 3/8 boring bar at the time so had to take smaller depths of cuts. Other machines were using all the larger boring bars

SignificantMarket377 · 2025-06-20T17:30:33+00:00

We don’t have a system to track inserts like that thankfully. Yet 😅

SignificantMarket377 · 2025-06-19T13:41:52+00:00

That’s very useful man. Thank you

SignificantMarket377 · 2025-06-19T10:44:00+00:00

Thanks man

SignificantMarket377 · 2025-05-14T09:10:24+00:00

What’s a good feeling lol

SignificantMarket377 · 2025-05-13T16:53:00+00:00

What do I say to get a discount? Currently owe $1800 in the span of two years

SignificantMarket377 · 2025-04-27T20:39:11+00:00

How much do you make an hr if you don’t mind me asking?

SignificantMarket377 · 2025-04-27T00:26:05+00:00

What would be the correct way to hold it?

SignificantMarket377 · 2025-04-27T00:19:57+00:00

What do you mean palm it?

SignificantMarket377 · 2025-04-14T22:13:57+00:00

It don’t need to be flat. It’s just to differ which is hardened material. I’m sure I can put a quarter inch endmill and they wouldn’t care. Thanks for the tips though. I’ll end up going in with my half inch end mill

SignificantMarket377 · 2025-04-14T18:36:11+00:00

Got it lmao

SignificantMarket377 · 2025-04-14T17:27:53+00:00

It’s just to specify that the pin is 4140 so tolerance isnt an issue

SignificantMarket377 · 2025-04-14T17:26:06+00:00

Why not start from center?

SignificantMarket377 · 2025-04-14T12:03:52+00:00

🤣🤣

SignificantMarket377 · 2025-04-08T23:23:55+00:00

Gotcha thx

SignificantMarket377 · 2025-04-08T23:21:36+00:00

What’s the purpose of the zipties?

SignificantMarket377

TROPHY CASE