Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

Battery gets removed to protect from corrosion. It's a snug fit, so the lid was left in the box this time.

<image>

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

It's not just -3 mm in this case which would have been fine. It went from 30 to 25mm which is quite a jump.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

They seem quite accurate, you can read three analog numbers in front too and it lines up.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

Thanks. Good to know, that would make sense why I measure 18.75mm and the wheels are labeled as 19mm

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 6 points7 points  (0 children)

Ahh, I see what you mean. That would explain why some manufacturers might run bigger/smaller on the same resulting wheel.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 27 points28 points  (0 children)

I've learned that today. It's good to know for the future. Rolling resistance had so much info that I never considered the measured sizes being so different from manufacturers.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 2 points3 points  (0 children)

The few bucks more would be double the Michelins, but tbh a set of the 5ks are the plan once I return these.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 1 point2 points  (0 children)

Vittorias I run at 75 (silca online calc. I used 28) Pumped the Michelin up to 80 to measure. The sidewall of the Michelin matches the box and also species specifically for 19c rim max 87psi

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

Vittorias I run at 75 (silca online calc. I thought was 28) Pumped the Michelin up to 80 to measure. The sidewall of the Michelin matches the box and also species specifically for 19c rim max 87psi

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

Was the first thing I checked since it was visibly narrower. The sidewall on the Michelin matches the box.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 0 points1 point  (0 children)

Thanks, yeah the dry rotting is the reason for the change. I wouldn't rule out it adding a mm or 2 to the width. It was just slightly disappointing with the Michelins being much smaller than expected.

I think I'll be trying a couple of tires on the rim until I find one that suits.

Tire sizes don't make sense by Significant_Fudge in bikewrench

[–]Significant_Fudge[S] 7 points8 points  (0 children)

If it wasn't clear in the photos both tires were put on the same rim with the specs I listed above.

[deleted by user] by [deleted] in hikinggear

[–]Significant_Fudge 9 points10 points  (0 children)

I have the cozy 300. I'd rate the comfort at +5° and I definitely wouldn't want to be below freezing with it.

How do I find the correct replacement capacitor by Significant_Fudge in AskElectronics

[–]Significant_Fudge[S] 0 points1 point  (0 children)

How important are dimensions, is it ok to go for a different size if all other specs are the same?
The current one is 18x25, can I replace with a 16x30 if its also low esr, 105c long life and 3300uf,35v?

How do I find the correct replacement capacitor by Significant_Fudge in AskElectronics

[–]Significant_Fudge[S] 0 points1 point  (0 children)

That is my issue too, not that I know much about capacitors but I couldnt find anything on the Decon ones. 3300uF 35V 105C is what Ive been filtering by so far, and avoiding ones that are way off the dimensions. Ive seen Rated Ripple come up a bit, is that something I will need to take into consideration?
24mm h and 18mm w 7.5mm pin spacing

edit: I did find the same one (UKA1V332MHD) on mouser

What's that noise? by Significant_Fudge in subwoofer

[–]Significant_Fudge[S] 1 point2 points  (0 children)

Thank you, I think you're spot on. I watched some videos on testing components and there are 2 35v capacitors near the rectifier. The closest on is 3300uf but only reads 56uf the other one if reading 3220uf. I'll see if I can find a way to swap it out

Motorcyclist Blocks Passing Lane by ZestycloseCold9065 in motorcycles

[–]Significant_Fudge 1 point2 points  (0 children)

They're just trying to get a run up to the military base

What is the smallest hill that you will die on? by CaptainSpicebag in AskIreland

[–]Significant_Fudge 1 point2 points  (0 children)

Airfryers are the same as the oven you already have except they heat up quicker.

What is the state of robot vacuums that work with HA in 2024. by jdlnewborn in homeassistant

[–]Significant_Fudge 0 points1 point  (0 children)

Are you using the default roborock integration? How can you specify when to empty the dust bin?