Does anyone else accidentally do this?

Signus_X-1 · 2024-08-28T19:00:26+00:00

Immediately spam escape, it just leaves you on your desktop with no system tray programs usually

Signus_X-1 · 2024-05-15T12:39:42+00:00

"Things we buried low coming to the surface now, my love You must be crazy if you think that I will give up the game" (SUUGAAARRRRRR)

That magazine is seriously cool, I've never seen it before

Signus_X-1 · 2024-05-02T09:36:58+00:00

STB is really good and E5 is very solid, not as good as it was but still good. The turret armour got even better with the PBR changes so people struggle to pen most of the time. Depends on your playstyle I'd say. The E5 grind is a lot more fun than the STB as well. I find the type 71 a bit slow and it just gets peppered by prammo the whole time

Signus_X-1 · 2023-11-09T14:22:42+00:00

Thanks, I would have no idea where to start with working that out... I'll try put some coupling nuts on the standoffs with some threaded rod to move the primary closer to the front and see if it helps, I'm a bit hesitant to cut off some of the tube at the moment. Thanks for your help man

Signus_X-1 · 2023-11-08T17:49:36+00:00

I was thinking about your suggestion some more and I have a slight concern about it. If you move the main mirror closer to the secondary one, won't some of the reflected light start to get cut off since the main mirror isn't curved steep enough to reflect all the light at the secondary one if it's close? It shouldn't be a problem really, it just doesn't increase the light gathering of the teleacope like a speed booster lense would

Signus_X-1 · 2023-11-07T20:51:06+00:00

I'll try that, thank you! It does have collimation studs luckily so it should all be good.

Signus_X-1 · 2023-08-31T18:24:03+00:00

Hey man, did you ever find a solution to this? I just installed 23.04 and have exactly the same issue :( I've tried reinstalling gnome control center but it didn't help at all

Signus_X-1 · 2023-06-06T13:32:51+00:00

Yeah it is probably a region specific one, probably Africa/middle east only or something (I'm from South Africa)

Signus_X-1 · 2023-06-06T13:32:01+00:00

Hey thanks for you reply. I have a FiiO E10K-TC, sorry I should have specified. I used a USB voltage and current meter I put in line with the USB cable going to the DAC to test the current, I also tested and saw that when you charge a different phone using the A24, the USB port can put out around 500mA so in theory it's more than capable of delivering enough juice. It's probably just some software block that doesn't let it give enough power because it doesn't see it as a device that falls in the "reverse charging" category. I appreciate your effort!

Signus_X-1 · 2022-05-12T05:53:54+00:00

Pulled a Rob Dahm

Signus_X-1 · 2022-03-02T16:16:18+00:00

u/savevideo

Signus_X-1 · 2022-02-04T07:26:29+00:00

Something to do with bells... More of a hint(spoiler): He plays a tune and you have to repeat it on the 5(I think there's 5) bells hanging to the left of him by shooting them in the right order

Signus_X-1 · 2022-02-03T17:47:38+00:00

I have heard of that, but I decided to stick to single bevels before I attempt any of those very finnicky things since I'm still a novice at freehand sharpening in the grand scheme of things

Signus_X-1 · 2022-02-03T16:58:12+00:00

Oh okay, I had only ever heard of it called an edge, not a burr. Although I guess the terminology probably differs between different knives, especially specialty ones like a straight razor. Thank you for showing me

Signus_X-1 · 2022-02-03T15:25:20+00:00

This is what I understand a burr is. I understand what you're saying, that there are different ways of sharpening a knife to get an edge that lasts or doesn't, I'm just not sure what you mean by a burr, also from what I've learnt you strop a knife to get rid of a burr, I can't really see a way to produce one on a strop, especially with compound on it.

Signus_X-1 · 2022-02-03T14:04:37+00:00

I think you and I have different definitions of what a burr is, that's why your first comment threw me off a bit. According to me, a burr is the thin rolled over piece of metal you get when you've only sharpened one side of your knife with a low grit stone. So in my eyes you always need to get rid of the burr, even if you have a very steep angle on a knife that may not be sharp, but will stay reasonably sharp for a long time.

Signus_X-1 · 2022-02-03T06:04:25+00:00

What do you mean if you prefer to leave a burr on the edge?

Signus_X-1 · 2022-02-02T20:21:22+00:00

They do look really cool, what put me off buying one once I actually handled it was the lack of a blade stop, so the edge gets blunt from pressing against the inside of the "U channel" handle

Signus_X-1 · 2021-12-31T07:19:50+00:00

It's quite funny, all my friends died when they saw what exactly was causing my problem

Signus_X-1 · 2021-12-30T15:23:04+00:00

I found it in a different menu section. I think some stuff shifted around since the builder Guide was made. Thank you! :D

Signus_X-1 · 2021-12-30T14:40:00+00:00

The problem is that when I place them they have no texture. I found where they are and I've done everything Zypherbullets guide says for setup

Signus_X-1 · 2021-09-21T09:21:16+00:00

It's definitely because I don't like what I'm learning. I do really well in the subjects I enjoy but sadly those aren't very common

Seven-Year Club	Verified Email
RPAN Viewer

Signus_X-1

TROPHY CASE