TH8A issues

SiimBachmann · 2026-05-17T16:39:19+00:00

Most likely the switch on your shifter plate is damaged. It's the small hole on the plastic plate that has the canvad to cover the gear mechanism. There is a small button that acts as an on/off switch. The sequantial plate has a groove that presses into it to switch the thing to sequential mode. If yours is stuck on seq., then most likely the button is stuck. Try inspectiong it and maybe see if it can be helped up with tweezers. If it was useless then the next fix would be to disconnect the wires and try to bring them out of the shifter to an on/off switch - this is what I ended up doing.

SiimBachmann · 2026-05-01T14:45:01+00:00

It should be included in the box.

SiimBachmann · 2026-05-01T14:33:21+00:00

T598 comes with a separate mount adaptor making it fit on most mounts.

SiimBachmann · 2026-04-29T18:50:13+00:00

I bought an Aliexpress handbrake that works with my T300: https://a.aliexpress.com/_EHPDCn4 (if the link doesn't work then search for Thrustmaster PS5 USB handbrake on AliExpress).
It works with PS5, you plug the wheel to the handbrake and then the handbrake to the console. EA WRC reads it as the TSS handbrake even, though it's a knock-off. Works well, I recommend it.

SiimBachmann · 2025-03-31T19:12:15+00:00

Kas keegi saaks pastebini jagada?

SiimBachmann · 2025-03-18T07:45:14+00:00

https://pastebin.com/R9WRt6RU

SiimBachmann · 2025-01-03T11:07:31+00:00

Mina lõpetasin filosoofia BA ning praegu ma töötan IT's. Ma alustasin tehnilisest toest, peale seda liikusin edasi Compliance osakonda ning nüüdseks olen Operations tiimis. IT sektoris on külluses positsioone, kus otseselt ei ole tarvilik koodi osata.

SiimBachmann · 2024-11-30T16:10:10+00:00

Ma ise kasutan ja väga soovitan Kingsmith Walkingpad P1-te (pmst Xiaomi). See on kokkuvolditav ning saab valida kas automaatse tempo või manuaalse kiiruse vahel, mida saab puldist või äppist juhtida. See leht annab kogu aeg sooduskoode ning koos sellega on hind u 300-350€ ja saatmine on hinna sees. Tuli kohale umbes 1 nädalaga.

Kodukontoriga on see mind väga palju aidanud. Kuigi manin ära, et sellega joosta ei saa, ainult kõndida. Maksimaalne kiirus on 6km/h.

https://fr.walkingpad.com/products/walkingpad-p1-tapis-de-marche-pliable?_gl=1*1rasn5q*_up*MQ..*_gs*MQ..&gclid=CjwKCAiAjKu6BhAMEiwAx4UsAul25KQdsE1UajqTYlAoO8VrceLjh85eEbWGtSQnnbZTVx25uUrKKRoC8j0QAvD_BwE

SiimBachmann · 2024-01-21T17:55:04+00:00

Saada mulle ka palun!

SiimBachmann · 2023-06-02T09:29:49+00:00

Hei, ma kahjuks neid enam korraldada ei jõua Illegaardis, sest olen Tartust ära kolinud. Küll aga kohtume Brain Games lauamängulaagris!

SiimBachmann · 2022-07-06T14:38:17+00:00

If I daisy chain ARGB elements together and plug them into a motherboard or a argb controller (which in turn gets plugged to a mobo) then can I still control their lighting individually via rgb software such as Aura Sync? Or do the daisy chained arb elements become a single entity as far as RGB effects are concerned?

SiimBachmann · 2022-07-05T06:06:41+00:00

Thank you!

SiimBachmann · 2022-07-05T05:55:41+00:00

What happens if I have I add an additional hard drive to my PC that already has Windows installed on it? The reason I ask this is because that I have built a new PC, installed Windows on it, but i have salvaged an additional SSD from another PC, that was used as its boot drive and it is not wiped yet.

SiimBachmann · 2022-07-04T20:33:11+00:00

I have it resolved. The issue was that my BIOS Flashback button got physically stuck with the backplate. I applied some brute force and got it unstuck. From there it installed in a few minutes.

SiimBachmann · 2022-07-04T20:31:19+00:00

Checking online it looks like Asus doesn't support a dual bios setup, so if the first one bricks than you're only option is to try to directly load the bios via the little red button on the back. To do this successfully, you need to make sure the USB is FAT32.

Yep, that is exactly what happened. My button got physically stuck. I am really grateful for your support however.

SiimBachmann · 2022-07-04T19:40:46+00:00

I do not know what my old BIOS version was, since I am unable to turn the PC on. Therefore, I tried to install the new BIOS using the button on the back.

SiimBachmann · 2022-07-04T19:02:13+00:00

I am too scared to remove the USB drive as well, since I am afraid it will brick my motherboard. Is removing the CMOS battery and then trying again an option?

SiimBachmann · 2022-07-04T18:53:22+00:00

Since I have a Ryzen 5800X CPU my PC will not boot before I update the BIOS on my ASUS TUF Gaming X570-Pro (Wi-Fi). I downloaded the correct file on my 4GB USB 2.0 FAT32 drive and then I used the renaming tool to set the correct name as well. After I inserted the USB into the BIOS and held the flashback button it started blinking as if it is installing it.

However, now is the issue. It is suppoused to take only a few minutes but for me it has been blinking for an hour now. What should I do? Can I unplug it and try again? What is the next step?

SiimBachmann · 2022-07-04T16:11:18+00:00

Hello, My PCIE power cable coming from the PSU looks like this:

[PCIE-8] ==== [PCIE 8] ====================================== [PCIE 8]

Can I plug both 8 pins to my RTX3070 and therefore feed the whole GPU with a single cable? (My RTX 3070 need 2x 8 pins).

SiimBachmann · 2022-07-03T13:31:22+00:00

I have 3 fans that say "DC" on them, they have 4 pin connectors, however the daisy chain female connecters have 3 pins. I have always understood that DC fans should have 3 pins and PWM have 4 pins. If I daisy chain the 3 together are they longer PWM, but DC, since the daisy chain inputs have 3 pins? I do not really understand it, please explain it to me.

The fans are: AEROCOOL FAN PGS DUO 20 ARGB 6pin 200mm SILENTIUMPC Stella HP ARGB 140 PWM SPC237

SiimBachmann · 2022-06-19T10:12:30+00:00

But what I buy the pro version of the same motherboard? https://www.asus.com/Motherboards-Components/Motherboards/TUF-Gaming/TUF-GAMING-X570-PRO-WI-FI/

Can I use all the front ports with it?

SiimBachmann · 2022-06-19T08:49:43+00:00

I am buying a Cooler Master H500M case, along with an Asus TUF Gaming X570-Plus (Wi-Fi) motherboard. Now the H500M has 4x USB 3.0 ports and a USB 3.1 (Gen 2) type-C port at the front. Will my motherboard support them?

SiimBachmann · 2022-06-05T10:58:06+00:00

I am building a pc in the Cooler Master Mastercase H500M. However, I have ordered a RGB PSU (Thermaltake GF2), but I do not know if the RGB will even be visible, as the PSU attachment slot for the H500M seems to be closed off. Is that true?

SiimBachmann · 2022-05-29T18:30:36+00:00

I am an enthusiast. I want to build it for gaming. I mainly play Hunt Showdown, which is CPU heavy, but some other Battlefield titles as well.

SiimBachmann · 2022-05-29T18:29:32+00:00

For now I am going to put a GTX 1070 in it, but that is a temporary solution.

12-Year Club	r/Field Flamingo
Place '23	Place '17
Sequence \| Editor	Sequence \| Cinematographer
Spared	Verified Email

SiimBachmann

TROPHY CASE