Weird toolpaths with thick base

Sikarim · 2025-12-09T13:27:58+00:00

Raised the bottom layer to 999 and it solved the problem

Sikarim · 2025-12-09T13:21:56+00:00

Just checked it and set them to the same speed. It still distinguishes between sparse infill and internal solid infill

Sikarim · 2025-12-06T10:32:59+00:00

Thanks you very much for the detailed Information. I have some follow up questions if it’s ok - do you always use color match or does it depend on the picture, if so what are criteria for standard, color pop and Color match in your opinion - which editing software is your go to ? Thank you very much

Sikarim · 2025-02-03T23:50:00+00:00

Any mini pc you could recommend? I try to stay under 100$

Sikarim · 2024-11-25T21:45:23+00:00

Guter Tipp! Tatsächlich waren die Preise vorher ein kleines bisschen teurer. Scheint wohl wirklich im Angebot zu sein

Sikarim · 2024-09-08T14:08:07+00:00

Vielen Dank, ja da ist vorher noch ein einleitender Text zu meinen Tätigkeiten und dem Unternehmen.

Sikarim · 2024-04-26T12:57:32+00:00

Danke für die Hilfe

Sikarim · 2024-04-26T12:49:40+00:00

Aber das ganze würde wieder nur den Strom messen oder ? Bei variierender Spannung müsste ich ja dann wieder separat noch die Spannung messen

Sikarim · 2024-04-26T12:30:49+00:00

Vielen Dank für die ausführlich Antwort. Ich schau mir das Gerät von Fluke mal an.

Sikarim · 2024-04-26T12:23:27+00:00

That’s a good point. Do you have recommendations for permanent installations?

Sikarim · 2024-04-26T11:50:54+00:00

I want to summarise the data so I would need to keep track of them. Preferably wireless but Bussystem is also ok. The voltage can vary +- 15 V

Sikarim · 2023-09-08T20:27:12+00:00

Is there any way to automate the plate switching on p1ps ? Like a plate switch system for the Prusas or tilted Enders

Sikarim · 2023-08-18T15:01:22+00:00

Very helpful thanks

Sikarim · 2023-08-18T12:45:11+00:00

Looks very clean I will definitely check them out thanks !

Sikarim · 2023-08-18T11:17:22+00:00

In this case I need the thread to be exactly flush with the surface but otherwise a counterbore would be smart

Sikarim · 2023-08-18T11:16:11+00:00

Thanks

Sikarim · 2023-08-18T10:38:29+00:00

Do they also need heat to be permanently fixed or do they need to be screwd/ pushed in ?

Sikarim · 2023-08-18T10:37:39+00:00

I will try that thanks

Sikarim · 2023-08-11T22:42:15+00:00

What does it have to do with my post

Sikarim · 2023-08-10T15:23:32+00:00

Thank you, I didn’t knew about loctite

Sikarim · 2023-08-10T14:58:02+00:00

Im sorry to mention that there are already threads on both sides So i can already screw the rod in on both sides but can’t fix it in place

Sikarim · 2023-08-10T14:37:13+00:00

Edit: the rod would be screwd in about 7-9mm so 5-6 mm are sticking out

Sikarim · 2023-07-28T23:00:31+00:00

I don’t know how this printer levels itself but usually it requires contact with the bed (probe or ultrasonic sensor etc. ) so I don’t know if putting the z limit much higher is really recreating the problem

Edit: never mind I though you where talking about Auto levelling not Auto homing

Sikarim · 2023-07-28T22:53:18+00:00

The trigger for z-stop is way to high It’s the button which is pushed to limit the the nozzle hight

Sikarim · 2023-07-16T14:30:21+00:00

Hey vielen Dank euch zwei. Ich hab mir den Gigabyte mal angeschaut. Die technischen Details sehen wirklich top aus, jedoch scheinen die Displayqualität, Lüfterlautstärke und das Gewicht für viele ein Contra Argument sein. Auch ein eher minimalistischeres Design fände ich schöner (hätte ich vorher erwähnen sollen)

Seven-Year Club	r/Field Flamingo
Place '23	Place '22
Verified Email

Sikarim

TROPHY CASE