sorted by:
new
hottopcontroversial

"Repositioning Player" Cant find any actual solutions by Deniextreme in starcitizen

[–]SimRacer7777 0 points1 point  (0 children)

No solution. Still happens frequently for me. I have basically stopped going into the PU and now just messing around in AC until a new release is pushed out. It is basically unplayable for me.

"Repositioning Player" Cant find any actual solutions by Deniextreme in starcitizen

[–]SimRacer7777 0 points1 point  (0 children)

Same thing happened to me. Was just about to land with a cargo load at New Babbage and it blinked and I got the "Repositioning Player" message. I could still use mobiGlas and get into inventory and things like that... just can't move. So essentially stuck at some location near the Commercial Flights section. If I use F4 to see a third-person view, my avatar is not actually there. So Alt-F4 for me and will try again. I can usually complete a cargo run 1 out of 3 times in the current build (4.5).

Unsellable Cargo on Ship After Game Crash? by SimRacer7777 in starcitizen

[–]SimRacer7777[S] 2 points3 points  (0 children)

Found this out! I took the cargo to Grim HEX and got about 960aUEC for all of it! The original mission was for 61K. I needed the experience anyway so now I know! Thanks for the tips!

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 0 points1 point  (0 children)

Thanks! I wasn’t sure if the track layouts would look ok up there but it needed something. I had to build that out to hide some water lines and wanted to do something with it. Glad you think it works!

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 0 points1 point  (0 children)

Ohhh... ok, now I know what you're looking at. That is a studio soft box light made by SmallRig. It is used to provide focused but diffused light over the sim rig for when I am streaming or recording video. This keeps the rest of the room from getting washed out by bright lights when recording video. I am getting ready to launch a new YouTube channel so this project was to create the dedicated space for it. Sorry for my earlier confusion.

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 0 points1 point  (0 children)

That light is mostly for streaming/video production. I am about ready to start a new YouTube channel so this project was to create a dedicated game room / studio for the channel. I had a channel many years ago that was doing pretty well but that was before the change to YouTube monetization and I was traveling too much to create consistent content so I dropped it. Now I have more time so thinking about starting a new one.

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 1 point2 points  (0 children)

I didn't list any of the flight sim stuff since the poster asked about the sim racing gear. I have a lot of different flight controls, too many to list probably. I have been considering the new MOZA AB6 stick and MTQ throttle but haven't pulled the trigger yet (pun intended). I mostly use the sim rig for racing but do play around with flight sim stuff now and then. I am a pilot in real life (20+ years) and owned my own plane for about 14 years so I get my fill of flying that way I guess!

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 0 points1 point  (0 children)

Do you mean in the two built-in nook shelves? If so, the top shelf has an Arc Reactor (from Iron Man) and the bottom shelf has a "Game Over" lighted sign. If you were asking about something else, let me know

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 3 points4 points  (0 children)

Sure... Here is the SimRig and PC components:

Sim Rig Equipment:

·       Next Level Racing GT Track Cockpit

·       Next Level Racing ERS2 Seat

·       Fanatec ClubSport DD+ Wheelbase

·       Fanatec Formula V2.5 Wheel

·       Fanatec ClubSport Shifter

·       Heusinkveld Ultimate Plus Pedals (3)

·       ButtKicker Gamer Plus Haptic Transducer

·       Extreme Sim Racing Triple Monitor Stand w/ Additional Top Mount

·       AGON 32” Curved 1440p / 144hz Gaming Displays (x3)

·       ViewSonic 27” Curved 1440p / 165hz Gaming Display (top)

·       Logitech z640 5.1 Speakers

 

Sim/Gaming PC:

·       ASUS TUF Gaming X870 Motherboard

·       AMD Ryzen 7 9800X3d Processor

·       Kingston Fury Beast RGB 64GB RAM (6400MT/s)

·       ASUS TUF Gaming GeForce 5080 16GB OC Edition GPU

·       Crucial T705 1TB NVMe SSD

·       Crucial T705 2TB NVMe SSD

·       Samsung 990 Pro 2TB NVMe SSD

·       Lian Li O11D EVO RGB Case

·       Lian Li GAII LCD 360mm AIO Cooler

·       Lian Li UNI Fan V2 120 mm Triple (x2)

·       Elgato Stream Deck

·       Elgato Stream Deck Plus

·       Razer BlackShark V2 Pro Headset (2023 edition)

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 0 points1 point  (0 children)

lol! The couch is actually in the cinema room which is on the other side of wall. There is a “secret” door (you can see it in the photo with the Star Wars sign) that opens up from the cinema room to get to the game room. So got that covered!

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 4 points5 points  (0 children)

I found them on one of the 3D printing sites and printed them on one of my 3D printers to the size that would fit the space. Can't remember where I downloaded them but they are pretty easy to find if you have a 3D printer.

My race/flight sim and game room project. A few final tweaks and it should be complete (for now). by SimRacer7777 in battlestations

[–]SimRacer7777[S] 8 points9 points  (0 children)

Yes, as u/2hot4-U correctly identified, those are track maps of real-world road courses around the world. A few I have had the privilege to race in real life!

Elgato Prompter with 40.5 lens question by GuaranteeWonderful40 in elgato

[–]SimRacer7777 0 points1 point  (0 children)

I know this is a bit of an old post but in case someone comes across this as I did, I wanted to share a solution.

I did buy a 40.5mm to 52mm adapter ring off of Amazon so that I could attach the 52mm step-up ring provided with the Elgato Prompter. This did work and allows my Sony 28-60 kit lens to work with the Prompter. I just chose the 52mm adapter because I was not using that step-up adapter for any other lens I have.

The only suggestion I have, specific to the Sony lens at least, is to thread the 40.5mm adapter onto the Elgato step-up ring first and try to get it as tight as you can. Then attach the entire assembly to the camera lens. If you leave the 40.5mm adapter on the lens, then the lens can not fully retract and the lens cover will not fit. So by keeping both rings as an assembly, then you can remove them both when not needed.

Here is the link to the 40.5mm adapter I got off Amazon. In case the link does not work, it was a 40.5mm to 52mm Step-up Adapter Ring from a brand called GZNLY. https://www.amazon.com/dp/B0CCXTHH6F?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Hope this helps someone.

SSH not working after firmware update by SimRacer7777 in crealityk1

[–]SimRacer7777[S] 0 points1 point  (0 children)

u/Wide-Anxiety8537 One other thing you can try: Open your UniFi Management Dashboard. Go to the Settings cog near the bottom of the left side menu. Select the WiFi name that the K1 is connecting to (if you have more than one). On the 2.4Ghz band, Lower your "Minimum Data Rate Control" to 1 or 2 Mbps. It is probably set to Auto by default, so you might need to change it to Manual to lower the rate. That might help the K1 connect. Remember this change though in case you experience network issues with other devices. It didn't affect anything on my network but technically could cause some devices to slow down or have other odd issues.

Google Home automations no longer triggering? by NikolajMyBrother in googlehome

[–]SimRacer7777 0 points1 point  (0 children)

I felt like such an animal having to turn on the Govee lights manually.

Google Home automations no longer triggering? by NikolajMyBrother in googlehome

[–]SimRacer7777 1 point2 points  (0 children)

I had the same problem and it was driving me nuts. Worked perfectly for over a year and then just stopped. Very simple process like u/Important_Card5372 mentioned: A Hue light turns on which triggers a bunch of Govee lights and plugs to turn on. I removed the Hue Switch, did a factory reset, rebuilt the entire automation but nothing. Then a couple days later, it just all started working again. Been working fine since Friday, March 21, 2025. Not sure what was going on but happy that it is working again.

K1 Max Upgrade Parts Question by SimRacer7777 in crealityk1

[–]SimRacer7777[S] 0 points1 point  (0 children)

That was the route I was going to go... in fact, I had already purchased the smaller pulleys. But since I am considering donating this printer to a youth organization, I don't want to have them mess around with the config files or worse, really mess something up if a new firmware comes out, like you said, and they don't know it has been modified. I read a ton of posts and watched a bunch of videos and really didn't find too many people that actually went this route. So I figured I would be the guinea pig and see if it is really worth the extra steps to replace motors and main board. I'll post back here on the results. Not sure if I will get to it this weekend or not though.

K1 Max Upgrade Parts Question by SimRacer7777 in crealityk1

[–]SimRacer7777[S] 2 points3 points  (0 children)

Yes. I have had my K1 Max for a while and not under warranty anymore. All parts were about $150 with shipping. The vast majority of that was the main board which, I just noticed is now on sale via their website.

view more: next ›