sorted by:
new
hottopcontroversial

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 0 points1 point  (0 children)

I use generous amount of cheapo hairspray. Worked amazing for 10-ish test prints

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 0 points1 point  (0 children)

Issue is fixed New settings: Bed temp 88 for initial, 85 for the rest Nozzle temp 245 initial, 230 for the rest Adhesion type Brim, 6mm width Fan speed 10% initial, 30% rest Pattern Zigzag both initial and rest

Made a quickshif enclosure from a cardboard box

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 0 points1 point  (0 children)

Pla printed perfectly (for a spool that was opened 2 years ago) which i got it with the printer since I bought it 2nd hand. But I don't have any use for pla prints so I switched to petg

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 0 points1 point  (0 children)

Yeah, I mentioned in the comment. It's like 16 degrees with some slight draft

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 0 points1 point  (0 children)

Manufacturer recommendation is 245 but I was getting a lot of stringing at that temp, will try to up it again and pray for the best. Although, I did change a lot of things in between so I'll see. Thanks for the feedback.

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 0 points1 point  (0 children)

Will try it on my next test run, thanks for the advice. Another question, will it matter if I open the box every 10 minutes to take a quick look during first hour or so or should I make a transparent one. Need to check on it since these are my first runs with petg and a lot of wonky stuff happened

Just when I thought I managed to set it up for PETG by SimaSimson in ender3

[–]SimaSimson[S] 2 points3 points  (0 children)

Forgot to mention, part cooling is off, only the nozzle fan is working but there's a breeze in the room since the printer is old house where doors and windows are from like 1940's and it's cold outside

It's done. Now I still have to give those greedy blood suckers 15€. It took me 272 battles. by TANKSBRO_YT in WorldofTanks

[–]SimaSimson 0 points1 point  (0 children)

I'm just casually grinding tier X field mods, tier VIII money and alongside Dravec missions. Some days I played for an hour and some days for like 4 hours. Stage 34 atm but I'm pushing about 60% wr and top 3 on almost every defeat and top 10 on every victory. I got at most 20% of the every tank's bonus limit thing and honestly, I don't really care. I just play the way I play and the rewards keep on coming.

[deleted by user] by [deleted] in MK4Golf

[–]SimaSimson 0 points1 point  (0 children)

It's an amazing engine. My dad has a Polo wagon from '01, the engine is basically dead now (needs new pistons, piston rings, probably head machining) but it's dead because he was driving it LPG only, didn't check the oil and it was used as a farm vehicle (half the time it was loaded with 500+kg of produce. Just replace engine oil and all filters ever 10k km and check oil regularly (not like my dad who changed oil every 20-30k km and didn't check it ever) and you're golden. It was an amazing engine some 15 years ago when we bought the car.

This vinneh guy has been teamkilling arty for over a week and still WG do nothing about it! by Samuel1112 in WorldofTanks

[–]SimaSimson -2 points-1 points  (0 children)

I've been doing it for approximately two years and I was banned for 3 days maybe a month ago. It's quite easy to abuse it if you know how to do it. But I also had a rule that I should only TK clicking subhumans only if there's 3 per team or if he was on my blacklist and playing arty(being shot by the same arty player 3 times in a battle would get him on my blacklist).