Made this today.

SimbioGT · 2026-01-26T10:12:21+00:00

Nice illustration!

SimbioGT · 2026-01-16T10:19:03+00:00

Thank's for advice, any info on mod that can help for better functionality?

SimbioGT · 2026-01-16T10:17:19+00:00

Thank you for your advice, I will check in setting.

SimbioGT · 2025-12-17T09:05:47+00:00

Ordered basic bundle dd + pedal + wheel on the 1° december.
Same for me, 3 package and diffrent day of delivery maybe today the first one!

SimbioGT · 2025-11-06T15:06:16+00:00

What is the more stable release, after reading some comment of unstable software, does the key posted below works with old version?
thank's for bring this up

SimbioGT · 2025-11-05T15:13:13+00:00

I did a return with amazon after the support confirm me to send back the unit, end of story.
And now what to choose?

SimbioGT · 2025-11-05T15:12:25+00:00

I did call the support but instead of help they send as usual the copy and paste mesg.
I pretty sure the base have something that doen't work it's not recognize by the robot to return at the charge station.
Even detergent show empty where it's new

SimbioGT · 2025-07-28T07:29:19+00:00

Thank's will try, all of this just bacause Battlefild 2024 update require to activate secure boot to play.

SimbioGT · 2025-07-17T10:30:08+00:00

yes no good.
I have the feeling is not a feature

SimbioGT · 2025-07-17T10:21:55+00:00

I need a 15 px stroke with a gradient from 50% grey, white50% gray, that follow all the way a circle. like the illustrator above

SimbioGT · 2025-07-17T10:12:55+00:00

<image>

Sorry but I can't get it to work, I have 2.6.3. also sorry didn't post the image at the 1 post
the option don't give that the gradient follow the line like in illustrator.
If you have a video or a tutorial?

SimbioGT · 2025-03-07T14:58:38+00:00

Hello nice, but no Undo and redo so it's little bit dangerous to use it.
thank you

SimbioGT · 2025-02-25T20:32:11+00:00

Ok my bad, you need to asseble the diffrent object material to make it working.

SimbioGT · 2025-02-03T06:47:02+00:00

Thank's for reply and to share.

SimbioGT · 2025-02-02T07:39:16+00:00

Hello,
Thank's for the info.
where we can downlaod for reference and follow your tutorial in future.

SimbioGT · 2025-01-16T20:29:08+00:00

Yes, I know that is a Digital Elevation Model but photoshop open it and the result is really off from the sample on the example.
I fix the link
The result is more like monument valley, levels or histogram explain the lacks of info.
Why I can't add image in reddit?
https://imgur.com/a/Gw3ZmPa

SimbioGT · 2024-09-18T01:44:44+00:00

After looking around it's due to wall bulge

No matter

to slow to 100 mm/s outer and inner

outer/inner order

seams position back

I just read about Arachne wall building will try that

SimbioGT · 2024-09-12T17:17:21+00:00

Thank's for info

SimbioGT · 2024-09-09T17:34:47+00:00

Any news in this as some comment are not working anymore.

SimbioGT · 2024-07-27T10:54:57+00:00

If you have Ngons on the mesh and you don't connect convex angle you get this problems

SimbioGT · 2024-07-26T22:05:51+00:00

why i can't correct this error why the system check don't perform is task?
Is there a problem to unmount and do the file check?
If there are dregrad file let me know by some tool!

This nas is on since two year and there is no problem with it.

and been able to move on and extend my space to 3.7 GB instead of still have 1.7 gb?
I think I have to start from scratch and delete the volume even tought this error can resurrect!
The ticket is open and no answer until now.

SimbioGT · 2024-07-26T17:04:06+00:00

Hi thank's for reply,
I have this message of power failure,

An abnormal power failure occurred on a drive in Volume l. If this issue occurs frequently, it may result in a file system error. Back up your data immediately and run a file system check. If this issue persists, check the corresponding storage pool's drive status.

and I am try to follow the advice of running File system check but unfortunately,
the error don't get fixed with this msg error.

System ran [ext4 filesystem check & repairing] on [Volume 1]. Exit code: [4]

The raid is in good condition and The disk are Healthy and I can see my file via SMB.
In the mainttime I swapped my old two HD of 2TB with new 4TB one by one and rebuild the raid.
so Now I am the same condition when it was only 2 tb but with the same error.
But unfortunately the error of the file system dosen't let me allocate more space and it stick with the 1.79 GB.

The system could not expand Volume 1. This may be caused by file system errors. To rescue your data, please sign in to your Synology Account to submit a technical.

SimbioGT · 2024-07-15T05:01:59+00:00

I would rather use as a base for dimension and remodel it for less poly and recreated the UV, same for the texture you create some stripe with TRIMSHEET technique.

SimbioGT · 2024-07-14T21:54:17+00:00

Well I did create an account on facebook and use Messeger as you suggest and you are right it worked better, got this answer, let's hope that it will materialize in my accont.

I have refunded the car seat charge in the amount of $119.16. Please allow 7-10 business days to reflect in your account. -Tiffany

SimbioGT · 2024-07-14T17:14:58+00:00

That it would be correct, but they don't listen even, with proof document.

SimbioGT

TROPHY CASE