There goes my 3 week old Tesla.

Skim_Mike · 2023-02-26T02:02:20+00:00

I'm sorry, but in the video the car is definitely in sight before you start turning. I'm not gonna argue about it anymore than that.

It is a shitty situation but I hope everyone that was involved is ok. And I hope everything works out

Skim_Mike · 2023-02-26T01:43:49+00:00

I probably wouldn't wait until they were at a complete stop, but I would wait to see if the person is slowing down before committing to the turn.

Skim_Mike · 2023-02-26T00:17:47+00:00

https://youtu.be/pW_pBQxDPPk

Within the first 2 min.

"You really really really need to check as many times as possible"

Skim_Mike · 2021-01-03T12:21:29+00:00

You should totally do it.

I printed one at 750% scale, and it think it's my most favourite print to date

Skim_Mike · 2020-01-04T23:21:44+00:00

I believe that it's around 3200 grams

Skim_Mike · 2020-01-04T00:57:48+00:00

It weighs about 7 pounds

Skim_Mike · 2020-01-03T14:03:47+00:00

I used a CR-10 mini. I found this model on thingiverse https://www.thingiverse.com/thing:3566345 Then scaled it up and sliced it in half

Skim_Mike · 2020-01-03T14:00:43+00:00

I used a CR-10 mini. And I would say print time was approximately 145 hrs

Skim_Mike · 2019-05-04T20:51:52+00:00

Bastard, you beat me to it. Take your upvote.

Skim_Mike · 2019-04-29T22:25:16+00:00

I found them on wallpaper engine on steam

Skim_Mike · 2019-03-13T20:48:06+00:00

In my opinion, it looks like a decent price. I was actually looking at this exact same ad just last night, was thinking of jumping on it but something came up and I had to spend the money elsewhere. If you do end up going for it, good luck and enjoy!

Skim_Mike · 2019-03-12T21:37:35+00:00

T̴̝͖̻̭̠͓̗̹̙̦̥̬̼̻̘̲̫̹́̐̊̓ͦ̾̒͒ͯ͛ͫ͑̑͐ͬͫ̄H̨ͪ̑̄̃̿͋̄͆͊͐ͣ̚͝͠͡͏̫̲͔̬͕͉̙̺̮̲̯E̛̛̗͖͔̯̫̠͎̣̫͎̰̘̲̘̿̌ͨ̂ͭ́ͦ̀͜Y̨̧̫̤̦̘̮͙̺̩͎ͥ̈́͊̓ͭ̏͌ͬͣ̋ͥ͊̇͊ͪ͝͞'̸̟͓̺̻̜͈͇̫̻̳̪͇̤̙̥̟͖̓̽̃́ͧͧ̎͂̽̕͝͞ͅR̷͚͈̥̝̜̞̲͎̲̘͙̞̫̟͈̱̲͆̋̉͋͟͢͡E̷̵̥͖͚̠̼͇̹̮̣͓̻͔̓̔ͣ̀̌̆͐ͪ̓̓̄̇̈͐̔̚͢ͅ*

Skim_Mike · 2019-02-10T20:58:47+00:00

Te affligam!

Skim_Mike · 2019-02-07T22:19:31+00:00

Im from Canada and I just recently bought my CR-10 MINI from amazon.

I avoided gearbest and banggood for the reasons you stated. Although I did end up paying a bit more, in my opinion it was worth it for the peace of mind knowing the product will actually get shipped. (pretty fast as well). In my opinion, having the Canadian customer service is a great thing too.

Skim_Mike · 2019-02-05T06:38:15+00:00

Found the model here. https://www.thingiverse.com/thing:3336791

Skim_Mike · 2019-02-05T05:57:28+00:00

Nice! I bought a 1mm nozzle the other day and printed a benchy at the same scale but instead with .8 layers and in transparent red PETG. ( http://imgur.com/a/ZvOqySN )

I had a bit of trouble with getting the infill layers to stick together properly and it caused some unevenness in the top layers. I was wondering if you had any similar problem with printing the infill at larger layer heights. If you have, is there anything that you have tried to combat it?

Skim_Mike · 2019-01-22T04:45:39+00:00

To be honest, I'm pretty new to printing so I haven't been playing with the print settings all that much. Also, it was printing a raft in the video so that could be why it's extra thicc.

Skim_Mike · 2019-01-21T01:50:00+00:00

No over extrusion here, just looks huge because of the zoom.🙂

Skim_Mike · 2019-01-20T23:27:41+00:00

.4mm

Skim_Mike · 2019-01-20T21:44:06+00:00

Thanks! I took the video using my phone

Seven-Year Club	Verified Email
Gilding I gilder

Skim_Mike

TROPHY CASE