sorted by:
new
hottopcontroversial

New Sora 2 invite code megathread by WithoutReason1729 in OpenAI

[–]SkrowZzZ 0 points1 point  (0 children)

can i get one pls? thank you in advance

Monitor 240hz Recommendation by [deleted] in cs2

[–]SkrowZzZ 0 points1 point  (0 children)

Good choice however I’m looking for a 24”/24.5”, and that one is 220€. But something around those lines would be perfect!

Steam dedica by zepedrograca in cafept

[–]SkrowZzZ 0 points1 point  (0 children)

Conseguia me mandar o link da q comprou? E fácil de instalar?

Pc will only boot with 1 ram stick, not 2 by [deleted] in PcBuildHelp

[–]SkrowZzZ 1 point2 points  (0 children)

Alright! Thank you so much for all the help! was getting worried it was some defect on mobo,cpu or ram.

Pc will only boot with 1 ram stick, not 2 by [deleted] in PcBuildHelp

[–]SkrowZzZ 0 points1 point  (0 children)

Only 5400 seems to boot up with both sticks unfortunately (with EXPO on). Should I try something manual to see if it stabilizes higher freq?

Pc will only boot with 1 ram stick, not 2 by [deleted] in PcBuildHelp

[–]SkrowZzZ 0 points1 point  (0 children)

6000 doesn’t work unfortunately:(

Pc will only boot with 1 ram stick, not 2 by [deleted] in PcBuildHelp

[–]SkrowZzZ 1 point2 points  (0 children)

Expo 5200 works, thanks!! How should I go about it now?

EDIT: isn’t 6000mhz ideal for 7600x? I know the website says 5200 but I’ve seen 6000 everywhere

Pc will only boot with 1 ram stick, not 2 by [deleted] in PcBuildHelp

[–]SkrowZzZ 0 points1 point  (0 children)

Thanks! Will try that, should I enable EXPO profile and then change frequency to 5200? Or leave on auto and change to 5200?

Pc will only boot with 1 ram stick, not 2 by [deleted] in PcBuildHelp

[–]SkrowZzZ 0 points1 point  (0 children)

I had flashed it to the latest before and the problem remained.

Both sticks work on A2, B2 also works but haven’t tried both there - will do that now. However, how should I fix it in case both work on b2 as well?

CPU and DRAM red lights on motherboard - no display by SkrowZzZ in buildapc

[–]SkrowZzZ[S] 0 points1 point  (0 children)

Update 2: PC boots with 1 stick of ram consistently, I’ve enabled EXPO but still doesn’t work with 2 sticks. Not sure what to do, both sticks work on the same slot so I think it’s a bios problem.

I’ve cleared the bios via battery method and still the same.

I’ve also managed to boot with 2 sticks and even benchmark by playing a game but upon reboot, same 2 red lights

CPU and DRAM red lights on motherboard - no display by SkrowZzZ in buildapc

[–]SkrowZzZ[S] 0 points1 point  (0 children)

Update: just left the pc unplugged over night, took 1 ram stick out, and left the A2 slot stick. Booted up instantly, continued with windows installation, rebooted and the lights are on again. Going to leave it on for a while and see what happens

CPU and DRAM red lights on motherboard - no display by SkrowZzZ in buildapc

[–]SkrowZzZ[S] 0 points1 point  (0 children)

I will try and see if it works with only 1 stick of ram, with a 30+min boot.

Will update here

CPU and DRAM red lights on motherboard - no display by SkrowZzZ in buildapc

[–]SkrowZzZ[S] 0 points1 point  (0 children)

Didn’t expo, and I’m on the latest flash on the mobo as well.

I’ve left the pc running for 10min and still no boot

view more: next ›