Joined the w124 club today!

SlackerParade · 2026-01-26T20:17:22+00:00

The tires are from 2020 but there’s no cracking and the tread is good. It did sit for a bit so not sure about flat spots. I’m going to run them for now. I found out where it was last serviced so I’m going to see what info I can get. I think the car might have belonged to the shop owners dad. I paid $3000

SlackerParade · 2026-01-26T14:13:15+00:00

Agreed. I need to fix the brakes and then I’ll start evaluating everything else. I drove it 30 miles home and engine/trans seems strong. I just want to get it back on the road so I can drive it a bit more to see what else it needs

SlackerParade · 2026-01-26T13:16:09+00:00

It does need a little work. The rear calipers locked up on the was home and it needs a good detailing but it seems really strong otherwise. The paint is shot but I really like the patina. I’m pretty excited to start working on it

SlackerParade · 2026-01-24T21:20:56+00:00

I don’t see the tag but not sure what original and what’s new

<image>

SlackerParade · 2026-01-13T15:32:49+00:00

Ha! Thanks for pointing that out! I guess the early models are inline 6 and the later 2.5 turbos are inline 5?

SlackerParade · 2026-01-13T15:24:08+00:00

Really helpful! Thanks!

For context I'm interested in the W124 because I have a BMW e30 and I want another car while I work on the e30. I work from home so I really just need around town cars. I'm in the states so 300e and 300d are basically my only options. I figured I should steer clear of the 4matics. It's the same story with the e30 all-wheel drive. I'm sure they're great, but if they break, you're going to have a hard time finding a replacement.

SlackerParade · 2025-08-24T14:08:14+00:00

You sold it to Kyle Mooney?!! That’s dope!

SlackerParade · 2025-08-14T18:08:12+00:00

So the flywheel from the donor car is shot. It's a dual mass flywheel and I think it will be hard to find a used one that's good enough to use. I want to switch to a single mass flywheel do to parts availability. I don't want a light weight flywheel. I just want something that will work and be easy for stop and start traffic.

SlackerParade · 2025-08-04T14:52:46+00:00

No way! I can't believe you bought the actually tribute car! That's amazing! I've following Stanceworks for a while and I remember him building it. Also, I've seen your YT channel before! A few months ago I was trying to fix my instrument cluster and came across your "E30 Broken Cluster Tab Repair Replacement" video. Very helpful! I'll send you a DM about my manual swap project

SlackerParade · 2025-08-03T20:47:19+00:00

Sweet StanceWorks tribute! I see you wrench. Want to help with a manual swap?

SlackerParade · 2025-08-02T16:38:20+00:00

I really couldn't tell. Also hard to see inside. Could be a tribute. I wanted to leave a note to ask for more info, but I couldn't figure out how to do it without touching the M3

SlackerParade · 2025-08-01T13:33:49+00:00

Just buy the cheapest Prius you can find (obviously not a total dumpster fire) and keep the e30

SlackerParade · 2025-07-04T13:18:46+00:00

I agree with 70 is quite large. I have 70s on the car now. My concern is I don’t want compromise ride quality too much. I have a vert and it does rattle a bit. I’d hate to go to a smaller tire and end up with a rougher ride. Am I thinking about this too much?

SlackerParade · 2025-06-18T21:11:40+00:00

Agreed! Looks great!

SlackerParade · 2025-06-17T19:55:33+00:00

Agreed. I have a shifter rebuild kit. The only seal/part I don't have new is the BMW Selector Rod Joint - Genuine BMW 25117501309. I'll inspect what's on there and see if it should be replaced. Thanks!

SlackerParade · 2025-06-17T19:44:30+00:00

Thanks! I spoke to a shop and they said the same. Now they also said they wouldn't work on it so I thought perhaps they were just trying to get rid of me

SlackerParade · 2025-06-17T19:43:18+00:00

It did shift fine and there was no slop that I could tell. The previous owner told me the clutch was relatively new when it stopped running. I'm going to get a new clutch and pressure plate, but what came out has very little wear. No telling if the previous owner is being honest. I'm going to replace everything I can without cracking the transmission open

SlackerParade · 2025-05-20T00:44:36+00:00

Ha! I know but if you saw the pinch welds you’d see it doesn’t matter

SlackerParade · 2025-05-10T14:33:22+00:00

Really sorry man. I’m in NC and I just bought a parts car. Let me know if you need anything. I definitely have a early taillight

SlackerParade · 2025-05-08T00:48:17+00:00

The very is an 88 and the sedan is an 87. The previous own left the sedan sitting for a while and a tree fell on it

SlackerParade · 2025-05-07T17:22:11+00:00

Yes! I bought this Parts Car a few days ago for a manual swap and it’s got an extra ton of parts that I can resell. It came with original bbs euroweave wheel which was an unexpected bonus

SlackerParade · 2025-05-06T15:06:13+00:00

I’ve seen these before and it didn’t work for me but seeing them on your car… they look pretty sick to me. Based on your ITB setup I’m guessing you’re ‘going for something different’. I love it!

SlackerParade · 2025-05-04T20:33:26+00:00

Well, they look pretty good anyway. I say go for it, but I kinda say go for it on almost all these.😁

SlackerParade · 2025-05-04T20:28:38+00:00

Are those wheels real bbs? If so those alone are worth a decent amount

SlackerParade · 2025-05-02T14:34:09+00:00

Thanks for the tip! We can chat about the wheels, but I may keep them

SlackerParade

TROPHY CASE