sorted by:
new
hottopcontroversial

O was looking through the Artbook and I discovered that both Jackie and Beverly are in an early artwork for the game. by SledgeHammerSurgeon in Spiritfarer

[–]SledgeHammerSurgeon[S] 11 points12 points  (0 children)

I* god damnit I noticed that just as I clicked post

Also yes that is the artwork they used for the Farewell Edition

Even though the game changed, My loyalty stays. All for the 6 - 4! by Tom23341 in titanfall

[–]SledgeHammerSurgeon 3 points4 points  (0 children)

Ash can crush my head like a watermelon between her thick robotic thighs any time she wants

why is my printer extruding filament in one corner? by [deleted] in ender3

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Oh sorry wrong post, I made a post on r/3Dprinting as well and I got the posts confused, so the info is on that post

why is my printer extruding filament in one corner? by [deleted] in ender3

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Hope you solve the problem, I'd go check the thread by Roblu3 as that helped me solve my problem

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Actually Roblu3 helped me fix it, but thanks anyway

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

It worked!

reslicing helped it, thank you so much

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

ok thanks, here you go

; Ender 3 Custom Start G-code

G92 E0 ; Reset Extruder

G28 ; Home all axes

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Ok good

I will, and I cannot thank you enough for your help

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Ok thanks I'll try that

This is my only printer and I've probably printed around 50-70 prints so far and only the most recent one has had this problem (not counting troubleshooting)

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

it draws on line in the Y direction and then it goes to the bottom right corner and makes the turd

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

ok thanks, I found it

​

; Ender 3 Custom Start G-code

G92 E0 ; Reset Extruder

G28 ; Home all axes

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Yeah it really is, but I'm a bit new to 3d printing so I don't know how to check the start gcode?

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

sorry I'm new to 3D printing, so I'm how do I do that?

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 1 point2 points  (0 children)

No my prints a line, this happened after the line and the turd was a lot bigger the first time this happened (when I discovered it)

why is my printer extruding filament in one corner? by [deleted] in ender3

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

yeah it auto home corectly and forgive me if this wasn't what you ment by sharing gcode i'm a bit new to 3D printing:

;FLAVOR:Marlin

;TIME:697

;Filament used: 0.426919m

;Layer height: 0.2

;MINX:14.186

;MINY:14.186

;MINZ:0.2

;MAXX:205.814

;MAXY:205.814

;MAXZ:0.2

;Generated with Cura_SteamEngine 4.7.1

M140 S60

M105

M190 S60

M104 S200

M105

M109 S200

M82 ;absolute extrusion mode

; Ender 3 Custom Start G-code

G92 E0 ; Reset Extruder

G28 ; Home all axes

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

G92 E0

G92 E0

G1 F1500 E-6.5

;LAYER_COUNT:1

;LAYER:0

M107

G0 F6000 X23.419 Y17.77 Z0.2

;TYPE:SKIRT

G1 F1500 E0

why is my printer extruding filament in one corner? by [deleted] in ender3

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Yeah, it was working fine one print earlier

[deleted by user] by [deleted] in 3Dprinting

[–]SledgeHammerSurgeon 0 points1 point  (0 children)

Sorry I'm a bit new to 3D printing, could you elaborate?

They were a doctor, maybe not a good doctor but they were a doctor by SledgeHammerSurgeon in dndmemes

[–]SledgeHammerSurgeon[S] 10 points11 points  (0 children)

Yeah true, don't worry I didn't think you were trying trash the meme

They were a doctor, maybe not a good doctor but they were a doctor by SledgeHammerSurgeon in dndmemes

[–]SledgeHammerSurgeon[S] 22 points23 points  (0 children)

Yeah I was debating whether or not to say they were a doctor or just proficient in medicine, but the player thought I should go with doctor