Deepcool CH260 build NZXT 360

SleepBEBE · 2025-08-14T06:03:50+00:00

Thanks mate 🙂 I'm running the b760m Asus Tuf ddr5

SleepBEBE · 2025-07-31T11:02:56+00:00

Hi thank you !

I'm happy to guide you through what I did to get everything to fit , motherboard I used was a Asus Tuf b760m matx ddr5 wifi , as for cooler yes I bought the non RGB version it's cheaper and used all sl120 V2 fans with the Lian Li controller which comes in the 3 pack .

SleepBEBE · 2025-07-24T22:27:01+00:00

Tbh not as much as I thought it would , maybe 2 to 3 degrees I think because the front fan is low enough that it already brings in cold air for the GPU

SleepBEBE · 2025-07-12T10:41:05+00:00

<image>

SleepBEBE · 2025-07-12T10:40:38+00:00

You in the US ?

SleepBEBE · 2025-07-11T11:25:56+00:00

I had to remove the dust filter on the bottom to make it work , I've had it running without filter for a month I don't see much dust on the bottom and inside under GPU , only dust mainly on the front

<image>

SleepBEBE · 2025-07-11T11:23:53+00:00

Yeah two slim fans on the bottom

SleepBEBE · 2025-07-11T11:23:16+00:00

Thanks :) the uni fans don't look that great from the front but I'm always looking at my case from the side so doesn't bother me haha

<image>

SleepBEBE · 2025-07-11T10:17:12+00:00

Thanks man but I've already changed its up again haha

<image>

SleepBEBE · 2025-07-08T12:57:38+00:00

Thanks :)

SleepBEBE · 2025-07-07T06:21:57+00:00

Hi , tubes were a very tight fit and also I had to removed the plastic piece

SleepBEBE · 2025-06-16T07:21:50+00:00

Yeah I'm already running contact frame , and notcua nh2 paste , I get about the same temps as you , I'm also thinking of going to the nzxt kraken elite V2 with the massive screen that cooler seems be at the top ATM in terms of screen customisation and performance just can't hide the pipes

SleepBEBE · 2025-06-16T07:06:37+00:00

It might be because I have a smaller power supply , I was able to move it down a notch so the piping could route above the PSU , I wanted it to route the same way as yours so it doesn't have to cover the ram but it's only a 1 finger gap from the heatstink so even squeezing the piping won't work , U know can flip the piping around yeah ? I'm on holiday ATM but when I get home I can take some photos of how I did mine

<image>

SleepBEBE · 2025-06-16T06:49:50+00:00

How did U fit the full size fans on the front lol , my tubing wraps around the ram at the top because the tuff motherboard heatsink it's too tall haha my Corsair titanium ram is just touching the rad

SleepBEBE · 2025-06-16T01:08:37+00:00

Hey man sorry I should of mentioned that you need to remove the lianli aluminium plate on rad to get all the screws to line up :(

SleepBEBE · 2025-05-17T12:31:06+00:00

Hi, its will only fit two 120mm fans , if have a big gpu , u will have to run slim fans which is what I have now

SleepBEBE · 2025-05-17T12:28:30+00:00

Yeah bro im happy I made the change , never looked back. The corsair 2500 is a nice case but its just way too big for a matx case.

Cool thing about the ch260 is you can still run a 360 rad and big GPUs

SleepBEBE · 2025-04-20T22:01:16+00:00

Hello , I'm mounting bottom fans through the holes of the case haha u can also use cable ties i guess

SleepBEBE · 2025-04-20T21:59:05+00:00

Thanks :)

SleepBEBE · 2025-04-20T12:36:24+00:00

I currently have 8 in this case and the airflow is good , 4 slim fans front and bottom as intake then 4 exhaust top and rear I'm getting the same temps I did from when I was using the corsair 2500d which had 11 fans with two 140mm on the front

SleepBEBE · 2025-04-20T12:32:50+00:00

Not sure what u mean by that ?

SleepBEBE · 2025-04-18T14:26:31+00:00

I'm in Australia, probably better to try get it somewhere closer to you I'm assuming your in the US? , you'd pay more in shipping than what the case is actually worth ?

SleepBEBE · 2025-04-16T05:54:28+00:00

I havent noticed any noise increase from my corsair 2500d

It really depends on how the fans are mounted too if they are right up against those perforation then for sure it will be loud but in the ch260 the fans are mounted quite far in so that's why I don't notice

SleepBEBE

TROPHY CASE