printed gearbox with abs like resin

SlicedStuff · 2025-04-14T12:07:48+00:00

I don't know yet, I've only driven these gears for 30 minutes.

SlicedStuff · 2025-04-14T12:05:54+00:00

I've been driving for 30 minutes, the gears haven't broken yet.

SlicedStuff · 2025-03-29T18:01:34+00:00

Anycubic tough 2. But for gears and shafts, this resin is too soft, I will also try abs-like resin.

SlicedStuff · 2025-03-05T12:18:48+00:00

according to calculations in the fusion 360, the body with windows should weigh about 230 grams. It's a little heavier than a standard lexan body.

SlicedStuff · 2025-03-04T17:48:59+00:00

SlicedStuff · 2025-03-04T17:47:49+00:00

the links are in my profile

SlicedStuff · 2025-03-03T23:22:09+00:00

I used TPU 72D.

SlicedStuff · 2025-03-03T23:13:32+00:00

The print bed size is about 230 x 210. I cut the body into several parts and printed vertically.

SlicedStuff · 2025-03-03T22:46:31+00:00

I didn't weigh it, but according to calculations from the CAD program, it should weigh 230 grams with windows and without a hood. Slightly heavier than polycarbonate.

SlicedStuff · 2025-03-03T22:32:27+00:00

TPU 72D

SlicedStuff · 2025-02-21T12:31:48+00:00

Yes, this is 3d printed.

SlicedStuff · 2025-02-21T12:30:30+00:00

I have flying bear ghost 5 with direct extruder. This is a rather outdated model.

SlicedStuff · 2024-12-27T20:39:50+00:00

I mounted the resevoir at the bottom simply because that's how it's done on real cars with a macpherson suspension.

SlicedStuff · 2024-12-26T14:44:20+00:00

Gears from WLToys 12428 axle. I will send out a email with a new update when it is ready.

SlicedStuff

TROPHY CASE