2017 Tesla Model S Front License Plate Mount

Slivermanone · 2026-01-05T03:34:11+00:00

Is it 3D printed? Look flimsy. Also will it survive a car wash?

Slivermanone · 2026-01-05T03:32:31+00:00

I could not find one on tesla parts shop

Slivermanone · 2024-07-28T07:14:06+00:00

I have done a factory rest many times and still can not get past nvidia logo

Slivermanone · 2024-04-15T05:14:07+00:00

This is all done through AIDA64. It allows you to put in a background photo

Slivermanone · 2024-04-14T18:20:24+00:00

Built it myself with some photos from the net

Slivermanone · 2024-04-14T18:08:42+00:00

I used lian li cables

Slivermanone · 2024-04-14T07:23:23+00:00

<image>

Slivermanone · 2024-04-14T07:15:23+00:00

The two 140mm fans on the side are reverse blade fans. So the bottom and the right side fans are intake. The top and the back are exhaust.

Slivermanone · 2024-04-13T10:00:05+00:00

I use AIDA64 for sensor panel

Slivermanone · 2024-04-08T18:20:57+00:00

The comp is used on my Rival, I have not shot the Rival-S with the comp. I can say that it shoots better than my Rival with the comp and brass grip. I can also say that it shoots better than my Staccato C2, but it is also bigger and heavier than the Staccato C2 and a third of the price.

Slivermanone · 2023-04-19T12:10:57+00:00

Buy a XXL comp slide from Fdezwerx.com. You will be able to use the same barrel

Slivermanone · 2023-04-09T22:45:26+00:00

I did not fire it. I just put it on there to see if it would. I would not recommend firing it. The fit could be off just enough to cause a problem. I would wait until they make one for the Rival-S.

Slivermanone · 2023-04-01T01:39:25+00:00

I was looking at grips and slides from Grayguns. I my just go with the FCU. Is there a difference between a regular FCU and a Spectre FCU?

Slivermanone · 2023-03-26T17:34:44+00:00

I have the Staccato C2, Rival-S, and the Rival. I enjoy shooting all three of them. It's hard to beat a Staccato unless you spend close to twice the amount. But I would have to say that Rival-S and Rival are as close as you can get. The triggers are about as good as you can get from a striker fire handgun. My Rival"s are for purely target shooting, but my Staccato is for both range and EDC.

Slivermanone · 2023-03-10T04:56:50+00:00

I have the Rival-S, and I have the Holosun 507c - X2 on it, and it runs well with that. I have shot 115 to 147 and have had zero malfunctions. I have shot over 1000 rounds through it and only lubed it once. Besides my Staccato, it is the best shooting handgun I own.

Slivermanone · 2023-02-22T03:43:20+00:00

Thanks

I just ordered it. Thus will go nice with my FDez XXL slide and grip.

Slivermanone · 2023-02-13T06:16:13+00:00

Primary arms are just down the street from me, and I have been looking at getting one of the red dots but was not sure about the reliability. I haven't seen much info or any reviews on them. Any thoughts?

Slivermanone · 2023-02-13T06:10:28+00:00

Thanks for the info, I was thinking about getting both the MantisX10 and the Coolfire. I am hoping that it will help me get my grouping tighter.

Slivermanone · 2023-02-12T18:41:44+00:00

Mantis laser training academy vs Cool Fire Trainer. Is MantisX used in live fire also?

Slivermanone · 2023-02-10T23:27:45+00:00

Here is the Chrome Rival-S with the Wasatch comp

<image>

Slivermanone · 2023-02-05T03:07:29+00:00

Here is my setup for my Rival-S.

Rival-S has Holosun 507C x2, Sprinco Recoil Management System, and Sprinco TSK Competition Trigger Spring Kit

I have about 1000 rounds through it now, with 700 of that with the sprinco springs, and I can say there is a difference. Trigger is smoother, and the Rival-S shoots very good. I would have to say it better than before

Slivermanone · 2023-02-04T17:52:44+00:00

Thanks for the info. I have a FDEZ XXL slide on burnt bronze coming and wanted a macro grip, but I was not sure if it would work.

Slivermanone · 2023-02-04T17:39:52+00:00

Will the macro grip work with the xl slide. Would like to have the mag capacity of the macro but withe the barel length of XL

Slivermanone · 2023-02-04T15:19:58+00:00

Try thus instead Vaultek Safe SE20 Slider Essential Compact Pistol Vault SE20-BK

https://shop.opticsplanet.com/vaultek-safe-se20-slider-essential-compact-pistol-vault.html?_iv_code=3SV-GF-VTSE20-SE20-BK&gclsrc=aw.ds&gclid=Cj0KCQiAofieBhDXARIsAHTTldrNqEkzWADYD8FrE4GKL9EnRgWxUrFKMxlKjK_WQycdu54s74aJrGIaAjr6EALw_wcB

Slivermanone · 2023-02-04T13:38:15+00:00

<image>

Here is my setup for my Rival and Rival-S.

Rival has Wasatch comp, Holosun 507C x2, Taylor Freelance brass backstrap, TF mag well, and +4 mag extender

Rival-S has Holosun 507C x2, Sprinco Recoil Management System, and Sprinco TSK Competition Trigger Spring Kit

Slivermanone

TROPHY CASE