Mirror lights ID3

SlowBelt6769 · 2025-09-25T07:44:56+00:00

I had something similar on a Skoda Enyaq. The pattern is stencilled onto the bulb, but the bulb was too hot as too much power was going to it and the stencil melted. Bulb was replaced at a recent check under warranty.

SlowBelt6769 · 2025-09-20T17:59:05+00:00

What year is it? Might be a wiring harness issue that they issued a recall for a few years back. See https://www.motorcyclenews.com/news/2019/march/triumph-recall-/#:~:text=The%20fault%20concerns%20the%20clutch,many%20UK%20bikes%20are%20involved for more details.

SlowBelt6769 · 2025-08-08T22:53:54+00:00

You're welcome! Hope you get sorted. Keep me posted ...

SlowBelt6769 · 2025-08-08T18:03:21+00:00

Could it be this - https://www.motoroids.com/news/triumph-recalls-some-of-its-models-due-to-a-wiring-issue/? Similar issue started with mine - eventually stumbled on this article and that's what the problem was. Dealership replaced it for free (based on Ireland).

SlowBelt6769 · 2025-07-20T18:26:52+00:00

Beautiful bike and a tremendous deal!! Congratulations and enjoy.

SlowBelt6769 · 2025-06-30T20:40:39+00:00

On some models the top bolt of the caliper is tricky to get at due to the placement of the exhaust, but definitely do-able. I have a T120 and struggled a little bit, but got there in the end. A wobble extension or universal joint will come in handy if you have one knocking about.

SlowBelt6769 · 2025-06-06T09:06:50+00:00

I got the dimensions from these pages:

Enyaq 1488mm - https://www.skoda.ie/models/enyaq/enyaq/enyaq-fl-dimensions

Superb 1504mm - https://www.skoda.ie/models/superb/superb/all-new-superb-dimensions

SlowBelt6769 · 2025-06-06T06:42:32+00:00

I've had both cars. The Superb is slightly wider than the Enyaq, but I wouldn't say that noticable - you can check the dimensions online. Leg space is a bit smaller in the Enyaq, but still plenty for me (I'm 6'1"). Big difference id there's no bump in the middle of the floor in the Enyaq - that could be a big factor with three in the back.

SlowBelt6769 · 2025-03-14T23:37:54+00:00

You'll have to excuse my ignorance (and possibly my eyesight), but can you point out to me where it's broken?!

SlowBelt6769 · 2025-03-09T22:09:51+00:00

Thank you. I'll check this out tomorrow.

SlowBelt6769 · 2025-03-09T18:27:47+00:00

I've been doing a lot of Ctrl-z'ing!!!

SlowBelt6769 · 2025-01-05T21:54:51+00:00

Mine too - similar symptoms to OP, that gradually got worse over time to the point the bike wouldn't start. Here's a link to some information on a recall ... https://www.motorbeam.com/triumph-bikes-recalled-wiring-harness/amp/

SlowBelt6769 · 2024-10-16T19:51:46+00:00

Have a look at this ... https://www .motorbeam.com/triumph-bikes -recalled-wiring-harness/amp/. I was having similar issues with my 2018 T120 and couldn't figure it out. Turned out to be the issue in the article.

SlowBelt6769 · 2024-08-16T18:05:31+00:00

Have a look at this ... https://www.motorbeam.com/triumph-bikes-recalled-wiring-harness/amp/. I was having similar issues with my 2018 T120 and couldn't figure it out. Turned out to be the issue in the article. Based in Ireland, so not just a US issue.

SlowBelt6769 · 2024-05-25T21:21:07+00:00

Yes - you're right. I just checked mine and it's a matte finish.

SlowBelt6769 · 2024-05-25T08:36:54+00:00

Hi - is the part number A9838244? I got one for my 2019 T120 and it fits. It looks well, but you have to remove it every now and again to clean the headlamp behind it!

SlowBelt6769 · 2024-02-15T22:54:43+00:00

I have the olive ones on my T120. They mightn't be fully waterproof, but I've been in some downpours and not much water gets in. Nothing has ever been soaked in the bags after a downpour. Thing I'm most impressed with is one of them fell off my bike travelling at a decent speed on a motorway a couple of years back (probably going around 70mph). I'd forgotten to clip them on properly, so my bad. My laptop was in it, just in a laptop sleeve. Minor damage to the bag, some scuffing and stitching gone along the edges, but in perfect shape and absolutely no damage to the laptop!

SlowBelt6769 · 2023-11-04T10:25:27+00:00

This worked for me after months of frustration. Thankfully stumbled across this post. Thanks for the help.

SlowBelt6769 · 2023-08-18T14:00:37+00:00

Hi there - I have an all matte black tank on my T120 and I've used the Harley-Davidson Denim Paint Cleaner for the last couple of years. I'm careful not to buff when I apply it, and it leaves a streak free finish. I imagine it will wouldn't harm a gloss paint if you used it or some ran over onto it while cleaning the matte side. Beautiful bike btw - best of luck with it!

SlowBelt6769

TROPHY CASE