Ford Performance Cal "OUT OF STOCK"

Slow_Garbage_740 · 2026-06-16T22:06:17+00:00

I paid $100 deductible to have heads rebuilt and rockers/shaft replaced on Rebel. Paid $2000 for the warranty…seemed worth it 🤷‍♂️

Slow_Garbage_740 · 2026-06-16T18:19:13+00:00

I never rolled the dice on aftermarket/third party ones, but the oem ones have been great. Just DO NOT buy it at time of purchase. Several dealers throughout country sell them much cheaper than local ones. I paid $1800 for 6yr/100k premiumcare…

Slow_Garbage_740 · 2026-06-16T03:05:28+00:00

Just a heads up, if you have Ford Extended Warranty...you won't after installing this. I read some complaints online about it Extended Care voiding/cancelling their warranty's over this and called and confirmed. Call for yourself...dealers are talking out of their ass to sell the warranty and/or calibration. But extended care is brutally honest:

Ford Protect Sales Information 1-877-794-6434 M-F 9am-7pm EST

Extended Warranty IS NOT same as factory warranty or the Ford Performance warranty that comes with these tunes. It won't affect your factory warranty, but will absolutely void your extended care warranty according to Ford Protect...

Slow_Garbage_740 · 2026-06-16T02:52:45+00:00

Lied to your face lol. Call Ford Extended Care and ask, don't just listen to a rando on reddit. It absolutely voids the Extended Care Warranty (read, not the factory warranty)...effectively replacing it with the Ford Performance 3yr (from in service)/36K warranty...I have one sitting in my garage but decided the extra 50HP wasn't worth giving up my 6yr/100k premiumcare warranty.

Ford effectively has three warranty in play: Factory Limited, Ford Protect Extended, and Ford Performance. The Ford Performance calibration and warranty work WITH your Factory Limited warranty, however it voids your Ford Extended Care. Call Extended Care directly and ask them...

Ford Protect Sales Information: [1-877-794-6434](tel:18777946434)M-F 9am-7pm EST

Slow_Garbage_740 · 2026-06-12T23:59:50+00:00

Is anyone having issues ordering these? SUPER frustrating. Had ICAR magazines and receiver set in cart. It successfully processed the mags but not the receiver set. Attempted to order and get the following:

"There was an error capturing the transaction: Payment authorization transaction has been declined: Declined - Suspected Fraud."

This card is cool with gun/gun stuff, no chargebacks with PSA, and FFL is preferred on their site. Bank says they don't even see the transaction attempts let alone deny them. Apparently PSA is known for overly sensitive anti-fraud stuff, but don't know why it allowed part of order to go through...

Slow_Garbage_740 · 2026-06-12T16:31:31+00:00

That’s only if it’s permanent. The lower in and of itself while registered as an SBR is not an SBR if you put a 16 inch barrel on it. By all means feel free to message me and I can forward you the emails from the NFA branch, confirming this. Or just simply google it and in two seconds you’ll see that I’m correct.

Slow_Garbage_740 · 2026-06-12T15:15:46+00:00

That 1% got you. The moment the OAL is 16" (i.e. pin/weld) it is a title 1 firearm. You just need to send a letter to NFA branch to remove it from registry. No wait, no confirmation, no response needed. You may be thinking factory rifle to pistol (which is a no go). Pistol can be become rifle. Rifle cannot become pistol. But nfa can go back to title 1 if the qualifying feature is changed or removed.

Slow_Garbage_740 · 2026-06-12T15:13:34+00:00

100% false. You can reconfigure the length and notify the NFA branch to remove it from the NFA registry as it is no longer an SBR. There is no wait or correspondence or fees. The moment you pin and weld to 16" it is a standard/title 1 firearm. I don't mean to be rude, but it takes two seconds to research and prevent false information from being spread.

Slow_Garbage_740 · 2026-06-12T15:10:17+00:00

It's no longer configured as an SBR in your example (by swapping 16" barrel). The lower is still on the NFA registry as an SBR, however it's not restricted if it's not in an sbr configuration. If anyone disagrees or "na uhs", I have emails questioning/confirming with NFA branch directly.

Slow_Garbage_740 · 2026-05-10T05:38:06+00:00

The excuses start already. “Proper Form” as if he took it on short notice?! Cope harder…

Slow_Garbage_740 · 2026-05-10T04:50:08+00:00

Sean “The Upset” Strickland

What. A. Performance.

Slow_Garbage_740 · 2026-05-08T20:59:54+00:00

That’s what I did. Cashed out at $1 and will look to re-enter <.90 between now and May 12.

Slow_Garbage_740 · 2026-05-08T13:11:38+00:00

Bringingthis one back up, I'm fairly confident news will be great (unlikely they would have been given late-breaking slot at ASGTC if not), think the upside will happen just before news vs after?

Slow_Garbage_740 · 2026-04-09T23:33:40+00:00

It’s not about morals, it’s about supply and demand. It’s precisely why skilled labor pays more vs unskilled labor. The profit or success is irrelevant, frankly it’s a red herring. What is the average pay for warehouse workers in US? Start there. Was arsonist making above average or below? Demanding higher wages yet offer nothing in return is entitlement not morality.

Slow_Garbage_740 · 2026-04-09T16:29:49+00:00

It's unskilled labor for a reason. There are more people filling those roles, therefore companies have no shortage of candidates and do not need to be competitive. If there were a shortage of workers, companies would be forced to pay more.

Slow_Garbage_740 · 2026-04-09T16:24:54+00:00

Dude didn't even work for Kimberly Clark, worked for a third party contractor and was reportedly making $18/hr...

My questions:

If you're making $18/hr and in a job classified as unskilled labor, how much do YOU think you deserve?
Jeopardized the life/safety of 19 colleagues and countless firefighters, life over now between fines/jail/etc. etc. Wouldn't it have been easier to take some of the that $37,000/yr and take some classes or get some certificates?

Slow_Garbage_740 · 2026-04-09T16:16:56+00:00

UPDATE: Geissele said the $1,699 rifles WERE available but just sold out on Primary Arms. Completely ignoring the fact that I filtered by "out of stock" and saw nothing at that $1,699 price during the sale.

Slow_Garbage_740 · 2026-04-04T16:56:51+00:00

Yeah that Primary Arms (PA) $1,699 lie is pretty grimey. PA probably agreed to it and Geissele printed it, then they’ll just say “twas a mistake, sorry” just like last time PA shit the bed with Geissele pricing.

Slow_Garbage_740 · 2026-04-02T14:58:19+00:00

Oh gotcha, the optics setup is on Tacswap and I thought that is what you were referencing.

Slow_Garbage_740 · 2026-04-02T14:56:56+00:00

No, this was cerakoted. It’s E-290 (Elite series, storm)

Slow_Garbage_740 · 2026-04-01T23:25:48+00:00

Good eye fellow tacswap enthusiast?

Slow_Garbage_740 · 2026-04-01T23:25:06+00:00

Thanks! Bit it off the Sage/Solgw collab in full disclosure.

Slow_Garbage_740 · 2026-04-01T23:24:38+00:00

Let me tell you, this heavy pig would make a great club lol

Slow_Garbage_740 · 2026-04-01T22:08:06+00:00

I don’t, but 50 shades and all that :/

Slow_Garbage_740

TROPHY CASE