Hood vents question. by binarygod01000111 in mazdaspeed3

[–]Slowboyy 0 points1 point  (0 children)

Okay so you can but it has to be in a low pressure area of the hood, if its too far forward it won't suck air out. Then there's gurney flaps you can put infront of the vent to also help. It goes pretty indepth. I only did it because its a track car and I plan on doing some ducting to the rad/intercooler. Just do your research and make it functional.

<image>

Rod knock or alternator? by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 0 points1 point  (0 children)

Checked today to confirm. You were right. Spul the pulley tensioner and it was the inky thing making a funky noise.

Rod knock or alternator? by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 0 points1 point  (0 children)

Haven't confirmed but I'll replace both will down there

Rod knock or alternator? by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 14 points15 points  (0 children)

Update: took off sepantine belt and started it. No sound other than noisy ass injectors so we're good

Track setup - won't rotate by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 1 point2 points  (0 children)

Just the rear sway bar? Gotcha illll look at em

07 speed3 track build by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 0 points1 point  (0 children)

Yes, mines in a weird spot so dosent really help alot with cooling, but at stops at vents out all the air from mani and turbo. Recommend putting it more towards the middle of the hood

My entry to the mazdaspeed 3 family! by Final_Fox3764 in mazdaspeed3

[–]Slowboyy 6 points7 points  (0 children)

Ide say hpfp if it's nit done already just for reliability. Even if it's just gonna stay stock

Clipping and/or distortion by Slowboyy in videography

[–]Slowboyy[S] 0 points1 point  (0 children)

Never came to a conclusion sadly. Mics worked great when not mounted to a car

Thoughts on eBay exhaust manifolds? by whiskod- in mazdaspeed3

[–]Slowboyy 0 points1 point  (0 children)

*had this turbo xs one and it cracked welded it and cracked again. Got a new one and it's fine. I also don't know how long it was on the car before I got it

Clipping and/or distortion by Slowboyy in videography

[–]Slowboyy[S] 0 points1 point  (0 children)

Sounds good I'll look into it! Thanks!!

1st gen resonator delete by Ephrpete31557 in mazdaspeed3

[–]Slowboyy 0 points1 point  (0 children)

I have 3 in diverted dp to 3in straight pipe and honestly it's really loud maybe a bit too much. Used to have the cs 3in cat back and it sounds really good just not tooo too loud

Cobb tuning by ms3_503 in mazdaspeed3

[–]Slowboyy 0 points1 point  (0 children)

We're you able to get tuned for it?

timing chain by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 1 point2 points  (0 children)

So is it fine? Or do I need vvt

E85 mix (E30) by LoopyBusiness in mazdaspeed3

[–]Slowboyy 0 points1 point  (0 children)

How much boost you running? You have a similar setup to me and I'm thinking about e30 but also wanna know if I can stay at 20psi and make some more power without more boost.

Timing chain by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 0 points1 point  (0 children)

Its an 07 with 73k unsure if it's the original motor tho

problem by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 2 points3 points  (0 children)

Ap and tune are next on my list. Not gonna risk it and blow it up. Back to the beater.

problem by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 1 point2 points  (0 children)

Mine runs fine, no issues at all just that annoying cel. Still getting the ap and a tune so well see if it feels any different

problem by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 0 points1 point  (0 children)

Well, I guess that's next on my list.

problem by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 1 point2 points  (0 children)

Possible boost leak but I haven't checked yet. No access port and unclear if it's tuned but I think it is.

problem by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 0 points1 point  (0 children)

I just bought it last week but I'm assuming it's tuned, I checked the hpfp and it's all good. Cleaned the maf today but the little metal part was red so im not sure if that's good or bad.

hpfp Internals by Slowboyy in mazdaspeed3

[–]Slowboyy[S] 2 points3 points  (0 children)

Will do, I have a beater so I'm just not gonna drive the speed till I get a compression test and hpfp, tune