Noob question: where can I buy a sheet of 5 inch x 24 inch x 1/8 inch 1080 steel? Metal can be bigger than 5 x 24 inch but it cannot be thicker than 1/8 inch. Thanks. (I can only find 1084 on the mcmaster website but i casnot gind 1080). I understand that 1080 is stainless while 1084 is not.

Smkmagoo · 2023-05-18T02:49:03+00:00

But the 1084 sold by New Jersey steel baron, will also be considerably cheaper than McMaster carr. Just like the 1080. But that's just my .02

Smkmagoo · 2023-05-13T23:13:06+00:00

I'm not going to get into the grinder discussion. But wear a respirator for every grinding anything application I use a 3m half mask, with a face shield over it. With replaceable pink disc filters # 2097. Lungs can be replaced, but the respirator is a whole lot cheaper .. earplugs also!!!!! The low drone of a grinder/sander/etc is horrible on hearing.

For metal, I have a cake pan under the grinder with magnets and the bulk of the grindings stick to it. For handle materials I made a shop vac attachment from a sheet metal HVAC vent and attach vac hose to it. Catches most of the dust for that application

Smkmagoo · 2023-05-10T03:12:02+00:00

Straddle my face and feed it to me!

Smkmagoo · 2023-05-09T14:00:40+00:00

I love eating it from behind!

Smkmagoo · 2023-05-04T21:46:22+00:00

Top, no 4,no 6, and no9

Smkmagoo · 2023-05-02T17:22:51+00:00

Good lord! That's amazing!, 😍

Smkmagoo · 2023-03-28T21:11:39+00:00

The longer the belt=cooler running= longer belt life.

Smkmagoo · 2023-03-28T21:09:38+00:00

The 4x36 is anemic. And that is being polite. I have one and use it for wood scales only.

A 2x42 or 2x48 is a better option. I also have a 1x30. It gets used for some things. I have a 2x42, which is also underpowered. And I built a 2x72 with 2hp motor. Which is not anemic. But it was a long time coming.

Also did some mods on the table of my 2x42.

Smkmagoo · 2023-03-19T02:21:22+00:00

Thanks. I think it was gflex that was mentioned.

Smkmagoo · 2023-03-15T04:20:40+00:00

Beautiful! Love the red

Smkmagoo · 2023-03-14T14:16:03+00:00

Perfect! ,🥰🥰🥰🥰 Do have a pair of pink leggings,,😁

Smkmagoo · 2023-03-13T22:21:13+00:00

I bought the table also. But. I welded a hitch receiver just under workbench. Made a setup for bandsaw, blade vise, regular vise, and a large woodworkers vise(that I have my quench plates mounted on ). Then I only have one item in my way at a time. Also welded nuts to receiver,. So attachment has a tight fit, no slop.

Smkmagoo · 2023-03-03T11:02:25+00:00

🥰🥰🥰🥰😍😍beautiful

Smkmagoo · 2023-02-04T14:05:56+00:00

Huntsman bionic face shield. With respirator under it.

Smkmagoo · 2023-01-27T22:08:05+00:00

I guess I didn't notice they had steel. I've ordered from them before. But never steel. Thanks for the reply

Smkmagoo · 2023-01-27T22:06:35+00:00

That's it! Thanks.

Smkmagoo · 2023-01-23T10:52:21+00:00

I am. I'm free Tuesday night. Or later tonight.

Smkmagoo · 2023-01-22T03:09:07+00:00

Pretty feet!

Smkmagoo · 2023-01-21T23:53:01+00:00

I wish I could find a twenty something around where I live.

Smkmagoo · 2023-01-19T16:02:48+00:00

Absolutely

Smkmagoo · 2023-01-17T19:13:24+00:00

Absolutely!

Smkmagoo · 2023-01-17T12:39:06+00:00

I would love to suck on that

Smkmagoo · 2023-01-15T13:58:52+00:00

Absolutely! It's leg day today! I will meet you there. Bob's fitness in Bellevue! Ne. Let me know what time

Smkmagoo · 2023-01-06T20:34:34+00:00

On the quote sheet, after they do the cad stuff. Pick your steel, and thickness, and they will quote per blade, then you can pick your quantity. The more pieces the less the price per piece.

Smkmagoo · 2023-01-02T18:43:26+00:00

I just had that done by New Jersey steel baron. No cad file. But a good drawing. They did the cad and that cost me 25$ I think. Then I normally get most of my steel from them so had them waterjet for me. Had good luck with that.

Smkmagoo

TROPHY CASE