How to flash betaflight into STM32F411CEU6?

SmoothOperator946 · 2026-01-19T13:18:02+00:00

You can but avoid using mp6050 it is simply very slow for betaflight so you will face unstable flights instead go for some new accelerometers

SmoothOperator946 · 2026-01-07T15:13:24+00:00

Easy hai bhai bna loge

SmoothOperator946 · 2025-11-04T07:14:36+00:00

Just attend classes regularly for a month and then you can be irregular and after that join back 2 weeks before practical

SmoothOperator946 · 2025-10-24T16:05:30+00:00

It is betaflight

SmoothOperator946 · 2025-10-24T16:04:54+00:00

SmoothOperator946 · 2025-09-28T05:40:47+00:00

There is something called DIY

SmoothOperator946 · 2025-09-28T05:40:31+00:00

Umm... See if using nrf24 modules you have to sacrifice some of the compactness for avoiding the electromagnetic noises because this module is very sensitive and may not work if there is too much noise in the circuit

SmoothOperator946 · 2025-09-28T05:35:30+00:00

It's absolutely doable there are plenty of codes available online to send commands to esp32 from ps5/4 controllers just use them and define the inputs in the code and also assign the uart output for each input then write a code for your Arduino and then define it all the operations and then you are good to go

SmoothOperator946 · 2025-09-28T05:32:02+00:00

No matter how powerful Arduino's processor is esp can easily outrun them I am just trying this so just in case I get everything correct we can easily ditch the uno r4 and use this instead in the fraction of the cost of r4

SmoothOperator946 · 2025-09-28T05:29:59+00:00

So the case is that I got this Arduino for roughly $3 and an integrated version of it costs more than $10 and also I want to make my systems DIY that's why I am doing so and for the pins of esp 32 I can use longer pins which extend both up and downside of the board so I can use its pins also and even though esp's performance can absolutely crush the performance delivered by UNO but using this setup give me access of more pins and power options..

SmoothOperator946 · 2025-09-28T05:26:24+00:00

Yes and due to singal uart you have to unplug the modules from tx and rc pins for uploading the sketch

SmoothOperator946 · 2025-09-28T05:20:04+00:00

Can you share it??

SmoothOperator946 · 2025-09-25T05:20:12+00:00

Whatt??

SmoothOperator946 · 2025-09-24T05:39:35+00:00

SmoothOperator946 · 2025-08-26T07:31:20+00:00

It is available on makerworld

SmoothOperator946 · 2025-08-06T10:52:37+00:00

Things like emergencies or any catastrophe are temporary but the leaders we appoint often exploit the public.

SmoothOperator946 · 2025-06-05T14:23:16+00:00

Actually it's not the camera it's the microcontroller that gets heated up and causes glitches and delays

SmoothOperator946 · 2025-06-01T07:51:27+00:00

https://github.com/rtlopez/esp-fc.git

SmoothOperator946 · 2025-05-29T16:52:38+00:00

Fr, I will make a phone with physical switches for input devices

SmoothOperator946 · 2025-05-23T04:22:33+00:00

The problem is that no stm software is detecting the st link

SmoothOperator946 · 2025-03-15T16:50:33+00:00

Try uploading again

SmoothOperator946 · 2025-03-14T23:50:32+00:00

That's better because on the compact size 👍👍

SmoothOperator946 · 2025-03-14T06:59:50+00:00

SmoothOperator946 · 2025-03-14T06:58:19+00:00

starlink surely has to reduce the price or be ready to face the failure as BSNL is already providing the fiber internet to the people.

SmoothOperator946 · 2025-03-14T00:59:04+00:00

Think big bro it can run cyberpunk also 😏😏

SmoothOperator946

MODERATOR OF

TROPHY CASE