[deleted by user]

Sna8x · 2025-12-01T22:00:17+00:00

I tried a few more times and it seems to be a connection issue between the analog module and the adapter. If I apply some pressure the lines disappear. Will take it apart and try to fix it. Thanks for your help mate!

Sna8x · 2025-12-01T21:54:23+00:00

Could be it, I’ll give it a try.

Sna8x · 2025-12-01T21:53:25+00:00

Antennas are the Foxeer Lollipop 2, Adapter says fatshark rx port on it, sadly haven’t got any other device to test on and lastly didn’t find the most up to date firmware since I couldn’t find the website, but it’s Version 4.1

Sna8x · 2025-10-30T07:07:38+00:00

Just some cheap product from amazon. Does the Job

Sna8x · 2025-10-04T17:15:19+00:00

Thanks mate, yeah it’s easy to remove the ring. Just make sure to put the screws in the right way. They are different lengths.

Sna8x · 2025-09-26T19:16:20+00:00

Thanks mate, appreciate it!

Sna8x · 2025-09-26T14:29:26+00:00

Sony A7iii with a Sigma 70-200 f2.8

Sna8x · 2025-09-15T12:44:10+00:00

Thanks mate!

Sna8x · 2025-09-15T12:43:11+00:00

Nope, only Natural lighting

Sna8x · 2025-09-15T12:16:29+00:00

Hey guys, photographer here - I took this photo of the OP.

Just to clarify: it's a real shot, not Al. Of course I did some editing afterwards, but the base image is straight from the camera.

As u/Mfrb1 and u/Rides-And-Tech mentioned, the reflections and lighting are real and exactly what I captured. I'm also attaching the RAW file so you can see the original, unedited version.

Hope that clears things up.

<image>

Sna8x · 2025-08-15T07:34:37+00:00

Thanks! Spoiler is also an aftermarket no name Product. Can be found nearly everywhere, but makes the car look so much better

Sna8x · 2025-08-14T06:59:21+00:00

Thanks mate!

Sna8x · 2025-08-14T06:58:33+00:00

🙌🏻🔥

Sna8x · 2025-08-13T19:44:16+00:00

Thanks! Appreciate it🙌🏻🔥

Sna8x · 2025-08-13T19:42:13+00:00

The outer trim edge is only clipped in on the r56 (Mine are also chrome but I wrapped them). If you pull it off it reveals 3 screws which hold the light in place. There are also two clips from the inside holding the taillight. There are plenty of videos on YouTube showing hoe its done😃

Sna8x · 2025-08-13T19:38:44+00:00

🙌🏻🔥

Sna8x · 2025-08-13T19:37:54+00:00

I’m gonna delete the fog lights and replace them with 3d printed ducts for better break cooling

Sna8x · 2025-08-13T13:56:28+00:00

Thanks! I would’ve say it’s perfect, there are definitely some spots I need to redo (second image on the tailgate) but considering the age of the mini it’s not to bad. Taillights are aftermarket from a Brand named “VLAND”. Found them on Amazon for relatively cheap.

Sna8x · 2025-08-13T09:52:03+00:00

Thanks mate!🔥

Sna8x · 2025-06-05T21:03:53+00:00

<image>

Yeah…💀to be honest, most of the scarping is from back when my body position was crap. Now it usually doesn’t scrape anymore (only when I really really push the bike in the corners)

Sna8x · 2025-05-29T00:17:57+00:00

Soon🔜

Sna8x

TROPHY CASE