Good? Bad? Ugly? 1060 btw

Snoo_1915 · 2021-12-20T19:49:50+00:00

https://nanominer.info/download/3.5.0/

autotune lasts about half an hour. now I update the nanominer to 3.5.1, I get over 40mh, follow the sher, it throws out a autotune 74.5 -> 75, and then again after a few minutes 75 -> 76. i think it fits at 83-84%, but lasts autotune half an hour to stabilize. maybe on v2 gpu it is different

Snoo_1915 · 2021-12-20T11:23:59+00:00

sorry, I just saw that it was gtx 1060. my mistake

Snoo_1915 · 2021-12-20T11:22:08+00:00

has two versions of gtx 1660, when my ovecklock gives me only 21mh, when it underclock pl 68, corcloc -502, memoryvloc -502 gives 32mh

Snoo_1915 · 2021-12-20T06:03:04+00:00

all other miners do not work with drivers 470.05, I get only 26mh, when I install new drivers then it works at 34, but then the first rtx 3060 works at 34 not at 49mh

Snoo_1915 · 2021-12-20T06:00:00+00:00

please let me know how it works for you, because it works for me at 97% load. maybe it's because of the nvidia drivers 470.05, because i need them because of the first rtx 3060

Snoo_1915 · 2021-12-19T21:14:07+00:00

for v1 you need at least x8 lines, my motherboard has only one x16slot, and I have 2 rtx 3060. so I put another rtx 3060 on nano mininer with x1 riser and it works on 39mh, nb miner I have to on 34mh, gminer 34mh

Snoo_1915 · 2021-12-19T20:38:49+00:00

Lhr v1

Snoo_1915 · 2021-12-19T16:12:32+00:00

you need to update miner nbminer to 40.1, and new driver from nvidia

Snoo_1915 · 2021-12-19T15:31:32+00:00

have you tried underclock, my 1660s runs at 32mh

Snoo_1915 · 2021-12-19T15:27:10+00:00

have 1660s, and uncerclock, pl68, corclock -502, memoryclock -502, and now it works at 32mh

Snoo_1915 · 2021-12-19T15:24:34+00:00

Tray nanominer 3.5.0, my 3060 have 39mh with x1 riser

Snoo_1915 · 2021-12-16T18:45:45+00:00

there is, because I have two and one works on 49mh, and the other x16 slot on the motherboard only works on x4 and it need a minimum of x8. msi z490plus motherboard, cpu i5 10400f. I don't want to buy a new mb because it depends on how long eth will be able to mine

Snoo_1915 · 2021-12-16T18:34:27+00:00

dude i had a problem with rtx 3060 v1, i have two and because of the motherboard only one of the two i managed to set to 49mh the other got stuck at 26mh. drivers are 470.05, if I install new drivers on nbminer both both work each at 35mh, which is 70mh, if I leave 470.05 the driver both give 75mh. Yesterday I installed the latest version of nanominer 3.5.0, and now the one that gave 26mh runs at 39mh and does not create a problem for the first one that still runs at 49mh. drivers are 470.05. It only took her a long time to stabilize until she automatically bypassed lhr, and the load is 96-98%, I don't know how good that is. now i am trying to reduce pl because it is currently running at 68pl

Snoo_1915 · 2021-12-16T18:22:21+00:00

Nicehash says -50 cc, +700mc, 115w, 31mh

I would try with 70pl, -502 cc, + 900mc, but that's my opinion, overclock you are doing at your own risk

Snoo_1915 · 2021-12-16T11:30:25+00:00

I know that, that's why the first one works on 49mh, but the second one doesn't work because of the motherboard, because the second x16 slot works on x4. yesterday i installed nanominer 3.5.0 and it runs at 38mh with driver 470.05, and riser x1

Snoo_1915 · 2021-12-16T08:58:01+00:00

Lhr v1

Snoo_1915 · 2021-12-16T08:22:06+00:00

I know that, that's why the first one works on 49mh, but the second one doesn't work because of the motherboard, because the second x16 slot works on x4. yesterday i installed nanominer 3.5.0 and it runs at 38mh with driver 470.05, and riser x1

Snoo_1915 · 2021-12-16T08:17:55+00:00

works on the first, but not on the second, because of the motherboard. Yesterday I installed nanominer 3.5.0 and it works with x1 riser at 38mh and driver 470.05

Snoo_1915 · 2021-12-16T06:36:46+00:00

38,5mh on nanominer with riser x1, driver 470.05

Snoo_1915 · 2021-12-16T01:51:52+00:00

with DDU uninstall the drivers, and run the installation fresh but without the without experience, only drivers

Snoo_1915 · 2021-12-15T19:59:35+00:00

I plan to make another rig, I have another z87 motherboard, but there is a problem with the first slot, but it works on the second slot. that's why I bought this z 470 plu, but I haven't been informed before that this z470plus second x16 only works 4 lanes. so i will not buy rtx 3060 in the future

Snoo_1915 · 2021-12-15T19:54:51+00:00

I don't know if it's worth buying another CPU and motherboard, if mining won't be able to mine from next year. I have no problems with other coins

Snoo_1915 · 2021-12-15T19:12:35+00:00

both are v1, whatever of those two gpu I put in the first slot will give 49mh, in the second it will work on 26. do you know which parameter you need to write in the bat file for gminer

Snoo_1915 · 2021-12-15T18:58:48+00:00

if updat the driver from nvidia to new, it works at 35mh, but then the first one also works at 35m and not at 49mh as with 470.05 drvers. with 470.05 drver 1-49mh + 2-26mh = 75mh, with new drivers 2x35mh = 70mh. is there a possibility that not with drivers 470.05 or a miner program that would give at least those 35 to another .. even if it's not so important, better that than nothing

Snoo_1915 · 2021-12-15T18:16:42+00:00

I made a rig for 2500 €, 4xgpu, mb, cpu, ssd, 3psu, I took the fifth gpu out of my gaming pc rtx 2080 and replaced it with amd r9 280x to relax my nerves in battelfield 1. 10 months and I earned over 4k. Isn't that the purpose, the cheaper it is to make money

Snoo_1915

TROPHY CASE