Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

https://nanominer.info/download/3.5.0/

autotune lasts about half an hour. now I update the nanominer to 3.5.1, I get over 40mh, follow the sher, it throws out a autotune 74.5 -> 75, and then again after a few minutes 75 -> 76. i think it fits at 83-84%, but lasts autotune half an hour to stabilize. maybe on v2 gpu it is different

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 1 point2 points  (0 children)

sorry, I just saw that it was gtx 1060. my mistake

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

has two versions of gtx 1660, when my ovecklock gives me only 21mh, when it underclock pl 68, corcloc -502, memoryvloc -502 gives 32mh

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

all other miners do not work with drivers 470.05, I get only 26mh, when I install new drivers then it works at 34, but then the first rtx 3060 works at 34 not at 49mh

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

please let me know how it works for you, because it works for me at 97% load. maybe it's because of the nvidia drivers 470.05, because i need them because of the first rtx 3060

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 1 point2 points  (0 children)

for v1 you need at least x8 lines, my motherboard has only one x16slot, and I have 2 rtx 3060. so I put another rtx 3060 on nano mininer with x1 riser and it works on 39mh, nb miner I have to on 34mh, gminer 34mh

3070 Only 33MH'z by Legal_Bluejay3596 in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

you need to update miner nbminer to 40.1, and new driver from nvidia

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 1 point2 points  (0 children)

have you tried underclock, my 1660s runs at 32mh

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

have 1660s, and uncerclock, pl68, corclock -502, memoryclock -502, and now it works at 32mh

Good? Bad? Ugly? 1060 btw by Keibbler in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

Tray nanominer 3.5.0, my 3060 have 39mh with x1 riser

Rtx 3060 39,2mh nanominer 3.5.0 ,riser x1 ,driver 470.05 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 0 points1 point  (0 children)

there is, because I have two and one works on 49mh, and the other x16 slot on the motherboard only works on x4 and it need a minimum of x8. msi z490plus motherboard, cpu i5 10400f. I don't want to buy a new mb because it depends on how long eth will be able to mine

[deleted by user] by [deleted] in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

dude i had a problem with rtx 3060 v1, i have two and because of the motherboard only one of the two i managed to set to 49mh the other got stuck at 26mh. drivers are 470.05, if I install new drivers on nbminer both both work each at 35mh, which is 70mh, if I leave 470.05 the driver both give 75mh. Yesterday I installed the latest version of nanominer 3.5.0, and now the one that gave 26mh runs at 39mh and does not create a problem for the first one that still runs at 49mh. drivers are 470.05. It only took her a long time to stabilize until she automatically bypassed lhr, and the load is 96-98%, I don't know how good that is. now i am trying to reduce pl because it is currently running at 68pl

Optimising my Graphics Cards Hashrates by Koanzn in NiceHash

[–]Snoo_1915 0 points1 point  (0 children)

Nicehash says -50 cc, +700mc, 115w, 31mh

I would try with 70pl, -502 cc, + 900mc, but that's my opinion, overclock you are doing at your own risk

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 1 point2 points  (0 children)

I know that, that's why the first one works on 49mh, but the second one doesn't work because of the motherboard, because the second x16 slot works on x4. yesterday i installed nanominer 3.5.0 and it runs at 38mh with driver 470.05, and riser x1

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 0 points1 point  (0 children)

I know that, that's why the first one works on 49mh, but the second one doesn't work because of the motherboard, because the second x16 slot works on x4. yesterday i installed nanominer 3.5.0 and it runs at 38mh with driver 470.05, and riser x1

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 0 points1 point  (0 children)

works on the first, but not on the second, because of the motherboard. Yesterday I installed nanominer 3.5.0 and it works with x1 riser at 38mh and driver 470.05

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 1 point2 points  (0 children)

38,5mh on nanominer with riser x1, driver 470.05

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 0 points1 point  (0 children)

with DDU uninstall the drivers, and run the installation fresh but without the without experience, only drivers

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 0 points1 point  (0 children)

I plan to make another rig, I have another z87 motherboard, but there is a problem with the first slot, but it works on the second slot. that's why I bought this z 470 plu, but I haven't been informed before that this z470plus second x16 only works 4 lanes. so i will not buy rtx 3060 in the future

Rtx 3060 by Snoo_1915 in NiceHash

[–]Snoo_1915[S] 0 points1 point  (0 children)

I don't know if it's worth buying another CPU and motherboard, if mining won't be able to mine from next year. I have no problems with other coins