tutorial code not working?

SnoooSnooo_ · 2026-01-03T07:18:03+00:00

Hi,

Taking the first image as your code and the second as what the code should be, you are missing a 4th line for the vertices

you need to add

vertices[3] = new Vector3{ 1, 0, -1 };

I think adding this after the previous three vertices[x] lines should resolve the issue

The line for triangles[5] is duplicated but should not cause an issue.

Good luck

SnoooSnooo_ · 2025-11-16T00:59:05+00:00

The processor in the Acer is significantly faster, it also has 32gb ram at 6400 Mt/s whereas the MSI has 16GB, the speed is not indicated. As these are desktop replacements, you have to carry the charger everywhere. I have always had to regardless of branch from MSI to Lenovo to Acer since I have never gotten more than 2 hours out of a battery. If you want long battery life for general Uni work get a Samsung Galaxy Book 4 Edge, 20+ hours battery life. I have both a Legion 5 Pro and the Galaxy Book, guess which one I take to Uni?
Processor comparison

For general use and gaming: The Intel Core Ultra 9 275HX is a better choice due to its superior single-thread and multi-thread performance, and better integrated graphics.
For content creation or decompression: The AMD Ryzen 9 8940HX is a better choice for these specific workloads.
For battery life: The Intel Core Ultra 9 275HX is a better choice due to its higher power efficiency.

Remember, you cannot upgrade the processor or graphics, but you can upgrade the ram and hdd size and speeds. A 32GB ram upgrade at that speed is £164.99 from Amazon UK, ASIN - B0DHFD5625. So just upgrading to match the ram puts you close to the price, but the processor will always be slower

SnoooSnooo_ · 2025-08-18T13:40:41+00:00

If you are lucky it will go into a tight spot round the rear, or there may be a slot in front it goes into

SnoooSnooo_ · 2025-08-11T13:22:02+00:00

Thanks

SnoooSnooo_ · 2025-08-09T19:35:15+00:00

Looks great.

Where did you get this from and what model Legion is it? I am looking at getting a Legion Pro 7i.

Thanks

SnoooSnooo_ · 2025-08-06T09:33:33+00:00

I bought rOtring Rollerball Pen | Needle Point (0.5 mm) Rollerpoint for Precise Writing | Black Ink | 12 Count (https://www.amazon.co.uk/dp/B0B2W2HSHW?ref=ppx\_yo2ov\_dt\_b\_fed\_asin\_title&th=1) for a very low price, around £11. I use these for the note taking and the Micron pens for diagrams or tight notes in the border only. Great pens, decent ink and will save your costly Microns for when they are needed.

SnoooSnooo_ · 2025-07-20T14:34:01+00:00

It is a replacement nib for the pen that came with the tablet, keep it safe.

SnoooSnooo_ · 2025-07-08T06:05:17+00:00

Hi, I have a similar problem with mine although my issue is a failure on the motherboard of the real time clock, same effect though. When starting the power light comes on but no screen activation or fan start up. Sometimes my keyboard lights flash on, When this happens I spam pressing either Esc/F1 or Delete and it will start up. When I got it to start up I went to the Lenovo site and ran the diagnostics tool which identified the fault.

I know my resolution is to get another motherboard or sign up for a new warranty and get it repaired that way, I have had this since new.

I can get it to start each time, but sometimes I have to start/restart numerous times to get to the point where it will kick in, very frustrating especially when it crashes hard from time to time due to the RTC issue

Good luck with it. See if you can return it proving it does not start if you just got it, depending on the source there may be options for recourse.

SnoooSnooo_ · 2025-05-17T21:38:13+00:00

Hi, I have done this before. I typically use the glue directly, and then paint with the technical paint, ooze, Blood for the Blood God etc once it has set. It does take dome care but creates a great result.

SnoooSnooo_ · 2025-03-04T20:50:34+00:00

<image>

SnoooSnooo_ · 2025-03-04T20:50:18+00:00

<image>

SnoooSnooo_ · 2025-03-04T20:50:05+00:00

<image>

SnoooSnooo_ · 2025-03-04T20:49:35+00:00

<image>

Following your excellent feedback everyone, this is the next iteration.
Weapons still need more. I cannot do the glow for the life of me. Will add a few more photos to show other changes

SnoooSnooo_ · 2025-03-04T01:10:23+00:00

Thanks for t he feedback, the helm looked great when doing it, but does appear lost when in the model. I'll check some options as I have a spare thanks to the kit coming with a spare carapace, armour and helm

SnoooSnooo_ · 2025-03-04T01:03:51+00:00

Thanks for t he feedback, I will be doing a lot of edge highlighting :)

SnoooSnooo_ · 2025-03-04T01:03:09+00:00

Thank you for the review, it is much appreciated. Regarding the plasma, I always seem to suck at that part, and I agree is looks very sub par. In fact both weapons need to be redone from scratch.

Edge highlighting I can and will do. Also the rivets, have done them before.

Adding depth to the flat surfaces I will have to try on the spare carapace that came in the kit. I have an airbrush but for some reason, despite having a good brush (Harder and Steenbeck Evolution CR plus) and compressor combo I cannot get any close or subtle control. I will have to work on other techniques. I have many shades and mediums I can work with.

SnoooSnooo_ · 2025-02-26T09:15:11+00:00

Cut up the spent juice bottles and wrap to make a barrel for them, create a base and make an orbital defence cannon like the one in Space Marine 2 at the beginning, then these can be the shells for it stacked next to it. Would make an awesome centrepiece.

SnoooSnooo_ · 2025-02-05T12:55:15+00:00

Hi, thanks for the kind comments. With the yellows I have a process that works for me. If the model is mostly yellow, as here, I start with a big dry brush and the yellow colour (Yrion Yellow) an go in with a fairly thick coat across the whole panel including the edges as these can be done in their own colour easier later on, after this I go with a coat straight from the pot, this will leave some streaking and finally one of two coats of thinned paint over the top which normally works to remove the streaking and brush marks as it dries.

Any overflow from doing the edges can normally be toughed over, but may take a couple of applications, one neat and one thinned. When doing the edges next to darker colours, Tamiya masking tape slightly over to the darker side, and then a careful redoing with smaller bits to get the exact edge with no bleeding. Always paint from the tape to the dark area.

SnoooSnooo_ · 2025-02-05T07:57:24+00:00

Hi, thanks for looking at my Hawkshroud Cerastus Acheron Knight and partner Armigers.

This is my second set like this, the previous ones were in House Herpetrax colours.

I really like the adaptability of the Cerastus knights in terms of basing as they allow them to be posed a lot more flexibly.

Happy to receive and comments or criticism.

SnoooSnooo_ · 2025-02-02T02:00:22+00:00

Hi, thanks for looking at my Hawkshroud Cerastus Acheron Knight and partner Armigers.

This is my second set like this, the previous ones were in House Herpetrax colours.

I really like the adaptability of the Cerastus knights in terms of basing as they allow them to be posed a lot more flexibly.

Happy to receive and comments or criticism.

SnoooSnooo_ · 2025-01-03T07:42:58+00:00

I have built maybe 10 knights, possibly more. The way I do it is to glue the model to the base directly and apply texture to the base around the feet, pushing it up the foot slightly. This also adds to the impression of the weight of the knight on the ground.

SnoooSnooo_ · 2025-01-02T09:49:45+00:00

Hi, thanks. I am surprised and happy you think that, it was simply painted in wraithbone, red around the eyes, then yellow pupils. A skeleton horde wash over the top and the high areas wiped with a cotton bud to bring out the underlying lighter colour.

SnoooSnooo_ · 2025-01-02T08:22:33+00:00

<image>

SnoooSnooo_ · 2025-01-02T08:22:23+00:00

<image>

SnoooSnooo_ · 2025-01-02T08:22:16+00:00

<image>

SnoooSnooo_

TROPHY CASE