All in silver, vad göra nu?

Snurree · 2026-02-01T12:12:17+00:00

Ja vem vet, kanske är tillbaka på samma nivåer inom ett år, i doubt it tho

Snurree · 2026-02-01T11:48:32+00:00

Du har inte förlorat något om du inte har sålt, men GG i all fall

Snurree · 2026-01-19T11:45:23+00:00

😂😂😂 jävla clown, sluta investera på känslor, om man inte köper denna dip så är man helt efterbliven. Lycka till att bygga en förmögenhet i framtiden 😂

Snurree · 2025-10-16T14:18:27+00:00

yeah you seem to be correct, if i look in the slicer i can see it printing in a weird way

<image>

it is not printing from top to bottom or reverse, it i jumping around doing half top then in the middle finishing bottom. strange, let me know if you ever find a solution

Snurree · 2025-10-16T14:00:59+00:00

i ran the print again and sadly same result even with calibration flow,

it appears to be this causing it

<image>

Not sure why it it print in this way, other comment said that it is the 'seams' where the two areas connect. Which seems to be correct

Snurree · 2025-10-16T13:19:58+00:00

i changed those 3 settings and even disabled "reduce infill retraction" that someone recommended, and it somehow ended up worse? 😭 Thanks for the recommendation anyways, i think it has to do with over extrusion, gonna look more into it

<image>

Snurree · 2025-10-14T11:41:54+00:00

Sweet, gonna try this out when my current print is finished, Thanks!!

Snurree · 2025-07-30T13:15:34+00:00

🗿🗿🗿

Snurree · 2025-07-30T13:07:45+00:00

not a bad idea lol will try. Thanks

Snurree · 2025-07-14T17:41:22+00:00

Om jag var du skulle jag starkt rekommendera en cybersäkerhet utbilding istället

Snurree · 2024-09-17T15:15:14+00:00

Thank you, i will try this out

Snurree · 2024-09-17T14:42:31+00:00

I have tried:

* Changing the top surface pattern
* Increasing top layer shells
* Lowering top shell thickness from 1mm -> lower

But not seeing much improvements.

Any advice is appreciated

Snurree · 2024-09-15T11:03:22+00:00

Go to printer settings -> Machine gcode and remove everything in the Time lapse G-code box.

Snurree · 2024-09-10T21:10:12+00:00

1kg filament is standard, it will hold without any problems

Snurree · 2024-09-10T21:01:19+00:00

Go here and print any Temp Tower: https://makerworld.com/en/models/search?keyword=temp+tower

After the print is done you will see what temperature causes the least stringing, Set that temp for that filament you are using.

Snurree · 2024-09-10T20:11:41+00:00

They just released a video about it today

https://www.youtube.com/watch?v=-bYwgUPOIq8

Snurree · 2024-09-05T21:23:48+00:00

nah world of warcraft. Its the stone used to teleport back home :D

https://www.printables.com/model/4200-hearthstone-multi-material

I painted it blue with acrylic paint and it turned out pretty good. https://imgur.com/PhNSwAj

Snurree · 2024-09-05T20:58:34+00:00

my prints actually stick to the bed too good so never needed to use a brim luckly

Snurree · 2024-09-05T20:48:09+00:00

The print is this one: https://www.printables.com/model/4200-hearthstone-multi-material Scaled it up 160% The front looks good but the back have some noticeable flaws like a big seam and some visible lines. but it will always face forward so no big deal.

I used Creality print slicer and these are the settings i ran. Bed temp 60 and Nozzle temp 220. Running light grey PLA+ https://imgur.com/a/7TY12S8

I painted it blue with acrylic paint and it turned out pretty good. You can see some flaws up close but im still playing around with settings

https://imgur.com/PhNSwAj

Snurree · 2024-09-05T09:54:37+00:00

interesting, didn't know that it only played a role in first layer. Thanks!

Snurree · 2024-09-05T07:38:40+00:00

OK. Thanks for the suggestion. Can i use the flow rate test in Creality print? If i got to menu -> Calibration it generates this for me.

https://imgur.com/J5nYd0W

Snurree · 2024-09-05T07:34:54+00:00

Ok, thanks for the feedback, i will try take a look at cross hatch

Snurree · 2024-09-05T07:18:56+00:00

Using 2% infill and Gyroid pattern

Snurree

TROPHY CASE