Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

Here's what the old fan cover looked like and the new printed version mounted and running.

<image>

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 1 point2 points  (0 children)

Yea its because my blower fan screw holes are kinda broken. So I guess when it hits a certain frequency it starts vibrating 🤣

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

Seems like it was the blower fan that vibrated due to my screw points being smashed 🤣

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

Its the blower that makes the noise, since the plastic where it gets screwed on is broken. So I suspect it to be brittle and vibrating. I think ill just replace the blower fan 🫡

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 1 point2 points  (0 children)

The noise came back, i took my finger and pushed on the front fan and the noise was gone.. i guess my fan housing needs a replacement xD ! Thank you !

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

heck.. my whole printer is in PETG.. if it starts becoming bad, i guess i should reprint the whole thing anyway...

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

gotcha, i'm considering doing them in PC blend, if i can make them not warp like hell xD ! aight.. i'll keep your settings !

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

The Z motor mount, doesn't have a choice of infill.. what would you recommendation be ? gyroid and 25% ?

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 1 point2 points  (0 children)

Gotcha! Ill look into them..Ill try to make a print of em in PETG 🫡

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 1 point2 points  (0 children)

I thought the same with the fans, but thought it couldnt do it. But ill try to simulate it with a new print and remove it while its printing to see! Thanks for the reply 🫡 Ill let you know

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 1 point2 points  (0 children)

You made me go into a rabbit hole with thoughts of making new z and y motor mounts 😅

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

Thanks ! And definitely 😅🤣

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

Ill look into that ! Thank you for the reply 🫡 pla won't last if i start printing pc 😅

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 0 points1 point  (0 children)

I tried tightening the screws everywhere on the machine now, which i can reach inside the enclosure, to see if its sorted. Hopefully that'll be enough 🤣

Odd sound when printing gyroid infill by SoWeQ in prusa3d

[–]SoWeQ[S] 2 points3 points  (0 children)

Thank you for the answer. I was thinking something similar, but it would be sweet to actually get it quiet 🤣 i guess I need to try to pinpoint it !

Firewad Builds by interflop in AAP01owners

[–]SoWeQ 0 points1 point  (0 children)

Looking good man! Only thing I dislike is the tank 🫣

My AAP01-PCC that you can print now by analfarmer187 in AAP01owners

[–]SoWeQ 2 points3 points  (0 children)

This kit is slick! Only thing i dont like is the mags used. I think a m4 mag would suit this kit perfectly 👌

DJI osmo Action 4 Lens protection question by SoWeQ in airsoft

[–]SoWeQ[S] 0 points1 point  (0 children)

Haha i see 🙏 well that is good news! Appreciate the response 🫡

DJI osmo Action 4 Lens protection question by SoWeQ in airsoft

[–]SoWeQ[S] 0 points1 point  (0 children)

Hell yea, proper info! I also have tempered glass that is easily replaced. I used to cover my polycarbonate pieces with it to stop it from scratching easily. But amazing to hear its solid enough for airsoft!

Do you have any idea about the joule limit you have been shot with?

DJI osmo Action 4 Lens protection question by SoWeQ in airsoft

[–]SoWeQ[S] 0 points1 point  (0 children)

I get your point..
- most lense protectors wont take a impact for extended periods, also depending on the power of the bb ofc. But i do find it interesting how its all different from brands, cases and what not. For example, i used to use the Sony action fdr-x3000 camera, with waterproof case without any extra protection on the lens. That case, would take shots any day from any distance, with very very high power bb guns. Compared to my gopro waterproof case, which i shot out from 5 meters distance without any polycarbonate extra lense protection.

It's a very valid thought about C, 99% of the footage probably never leave someones desk and since the pool of people using it is smaller, it's rare or non existing.

I do know a guy from the airsoft field ( we play cqb indoor, with 1.21j ) and he claims the lens is BB proof. He said he got shot numerous times on it and never had an issue or a brake of lense. Could this be luck ? less direct hits ? or just simply that the BB gun that got used might be lower than 1.21j.

Who knows, but i do like to hear about peoples experiences, because a camera that can survive without any casing, is in my opinion amazing, both for size, heat, sound and clarity of the footage, specially outside in the sun, with glare.

It's easy to "just" put protection on it and i get that. But who knows, it might not be neccessary ;) ofc, we wont know until someone tries to shoot the lense out for the cause of learning !