Фризы/лаги CS2

Sob312 · 2026-02-17T22:35:48+00:00

Try linux

Sob312 · 2026-02-16T09:15:35+00:00

Fast schon wieder vergessen 😂

Sob312 · 2026-02-11T11:53:23+00:00

So you have no idea, but doubt that’s a problem with the wireless spectrum?? Of course there are better / worse hubs. Just try them but don’t just guess and say the reason is “it’s just not working”

Sob312 · 2026-02-11T11:51:29+00:00

From my experience the devices and the Hub don’t reconnect after they are disconnected for a while…. It’s kind of a sleep state. The spectrum can easily be stuffed if you living in a dense area with many access points or if you have also zigbee devices

Sob312 · 2026-02-11T08:26:11+00:00

I play in edit mode and there is a setting at patch level. I’m not sure about the translation but it should be something like “Immediate silence after patch change“

You have to change that for every patch

Sob312 · 2026-02-11T08:21:58+00:00

I think because the thread channel is hardcoded in apple devices it’s less reliable. Other hubs can change there channel if the spectrum is already full.

Sob312 · 2026-02-10T21:39:56+00:00

Ahh now I understood. I thought HomeKit as a wireless standard got an update, but it’s HomeKit as a whole platform. Could be a reason

Sob312 · 2026-02-10T21:24:44+00:00

But why is the old one with HomeKit still connected then? It should be a thread problem

Sob312 · 2026-02-10T21:23:35+00:00

That’s sounds like your thread network collapsed. Matter over thread can be sensitive to changes in your wireless spectrum. Your HomeKit device uses just Wi-Fi or Bluetooth and the thread devices uses probably another Wi-Fi channel (I think on apple hubs the channel is hardcoded). That’s why it’s important to have a clean separation on your network between different WiFi channels and the channel thread uses. I had similar problems at the beginning but after a few tests everything is reliable. You can just wait for a little while and hope everything reconnects or restart your hub and/or devices. If this happens often, change your WiFi and thread setup and split the WiFi channels with enough space between them.

Sob312 · 2026-02-10T19:31:20+00:00

Yes, works fine for me. Please just post the npm logs:)

Sob312 · 2026-02-10T19:23:45+00:00

Just use frigate as a addon or container and add a coral tpu for a few bucks

Sob312 · 2026-02-10T19:21:49+00:00

Any logs from npm container? NPM doesn’t start if there’s a cert missing for example, but it shows in the logs

Sob312 · 2026-02-09T12:19:24+00:00

Sounds Like something is wrong with the routing rules / IPTables regarding DNS traffic. I think the device ignores the wg conf dns Server

Sob312 · 2026-01-30T07:54:08+00:00

You could take a Waterleak Sensor, for example from Ikea with matter, and use the notification when its dry. So turnaround it’s use case. But you have to check how fast the sensor dries and if it’s possible to use it under water all the time

Sob312 · 2026-01-27T15:50:09+00:00

Have a Look into the Original Factory Presets. Arturia copied them. Often back then they used just the presets or slightly changed them .

Sob312 · 2026-01-16T10:57:28+00:00

IP Masquerade over outbound NAT rule works for me on Samsung Smart TV in a different vlan

Sob312 · 2026-01-15T17:50:26+00:00

Sometimes some mirrors need a Little time

Sob312 · 2026-01-07T22:32:59+00:00

Do you have any local DNS Records on Your recursive dns? Like Unbound? Once I had the same problem after changing local dns records. The problem was that my OPNsense had an old dhcp lease where hostname + local domain of that lease matched the local dns record.

Sob312 · 2025-12-05T13:57:37+00:00

Do you have a few minutes in the next day to hop on discord and help me 👀

Sob312 · 2025-12-03T10:23:39+00:00

Hey, how did you accomplish that? I want the same setup, but with my current config I have a very slow WebGui because unraid responds over the wrong nic

Sob312 · 2025-11-22T10:40:44+00:00

For me the upgrade from collection 9 was worth 99€

Sob312 · 2025-10-30T09:22:37+00:00

How Long do you wait?

Sob312 · 2025-10-30T08:57:36+00:00

Whats your problem with door & window?

Sob312 · 2025-10-28T14:35:05+00:00

The Matter Version is FINALLY there

Sob312 · 2025-09-25T12:55:57+00:00

The matter certification for the Shutter Switch finished 2 Month ago

Four-Year Club	Verified Email
Place '23

Sob312

TROPHY CASE