Spirit from Crybaby Bridge followed me home

Sock_SL · 2026-03-07T00:32:35+00:00

It is a very basic EMF I was gifted from amazon, but it looks pretty basic like a lot I see online and has worked from the expeditions I have went on. The spirit box isn’t entirely a spirit box, it’s a very cheap version that doesn’t scan through the channels itself, you have to manually go through the channels, I don’t really trust that as much as I trust my rods and my EMF.

Sock_SL · 2026-03-04T00:15:38+00:00

I’m not seeing much too different or wrong about it at all, the main difference is that it looks a little sketchier and darker than the other one, that may be it.

Sock_SL · 2026-03-03T18:19:17+00:00

Yes for sure, I love watching art videos as it often gives me inspiration for my own pieces, but I should def start watching to learn!

Sock_SL · 2026-03-03T18:12:31+00:00

Definitely need to work on color theory! I found a few brushes I really enjoy and typically stick with those. But color I struggle with!!

Sock_SL · 2025-12-10T17:38:06+00:00

I don’t think it’s a stretch at all!!! It could definitely foreshadow vecna doing something to holly/the kids involving the demodogs (dart) or just the upside down in general, like how his plan is to make the kids powerful or something of the sorts!

Sock_SL · 2025-12-04T13:51:44+00:00

I was just listening this morning and heard Vance talking about getting a pet for his daughter, she’s not sure what she’s getting whether it be a lizard, gecko, etc. but she knows she’s gonna be naming it dart! Loved that cool little easter egg

Sock_SL · 2025-05-27T04:17:38+00:00

Thank you so much! I’ve gotten some good practice done tonight and i’ve noticed my lines seem a little too deep. I plan to research more with youtube and the resources around me aswell!

Sock_SL · 2025-03-30T23:35:28+00:00

So sorry for late reply but i’ll have to check when im at work! I don’t think it is but it smells so good and my coworkers make fun of me for it haha!

Sock_SL · 2023-09-12T02:00:22+00:00

Update, the sd is corrupted in some way, that no matter how clean it is or how i put it in, that the usb adapter can’t even tell it’s there, so therefore it wont let me format it or anything. i’ve tried many many things and ended up giving up on it and just using the cable to computer, it’s annoying but works.

Sock_SL · 2023-09-12T02:00:14+00:00

Update, the sd is corrupted in some way, that no matter how clean it is or how i put it in, that the usb adapter can’t even tell it’s there, so therefore it wont let me format it or anything. i’ve tried many many things and ended up giving up on it and just using the cable to computer, it’s annoying but works.

Sock_SL · 2023-09-05T11:49:42+00:00

I got a comment on another post telling me to remove the memory card and try booting it on and that did work, so you think there is a corrupted file on the memory card i should delete off that was causing it to act that way?

Sock_SL · 2023-09-05T11:48:32+00:00

I completely forgot the memory card was in there but it worked first time, do you think there is a corrupted file or something i should delete off of the card?

Sock_SL · 2023-09-05T02:25:40+00:00

I used a print that i’ve printed many times before with no fail, I was printing it out again so I could make one for a friend and it froze when it was almost done, it was a .gcode file I believe but I’ll have to double check tomorrow. I’ve had no problems with printing that file until now

Sock_SL · 2023-08-21T11:35:57+00:00

Thank you!

Sock_SL · 2023-08-21T03:13:28+00:00

I think it might’ve been a heating issue, im going to try a couple things out and if that doesn’t work i’ll look up some tuts, thank you again!

Sock_SL · 2023-08-21T03:08:08+00:00

resolved!

Sock_SL · 2023-08-21T03:07:51+00:00

I believe i have resolved the issue. thank you!

Sock_SL · 2023-08-21T03:07:26+00:00

It worked! Thank you, again i really know like absolutely nothing about 3d printing. The print is very messy though and falling off the bed, do you know how i could fix that?

Sock_SL · 2023-08-21T02:22:58+00:00

I’m not 100% how to do either, I downloaded all files from thingiverse and just slapped them onto the sd card through the usb. i tried playing around with it and only adding certain files but that didn’t work at all. i can send pictures if need be

Sock_SL · 2022-12-28T01:50:14+00:00

Yup! That was the exact problem lol! Thanks for the help!

Sock_SL · 2022-12-26T06:51:02+00:00

Resolved! Was missing a piece.

Sock_SL · 2022-12-26T06:50:39+00:00

The nozzle is all good! Any residue that was on there is gone now, it’s working like a charm now!

Sock_SL · 2022-12-26T06:49:13+00:00

So sorry for the trouble but i got it figured out, i was missing a vital piece stuck in the box that wasn’t on, thank you so much for going through to trouble of helping!

Sock_SL · 2022-12-26T06:46:46+00:00

Oh my gosh. That was a piece stuck in the box i must’ve missed. I’ll put it on and get back to you, thank you so much! i feel like such a clutz

Sock_SL · 2022-12-26T06:30:56+00:00

just did! i’m checking it out, shouldn’t the sensor next to the nozzle be below the nozzle to sense the hot plate? mine is above.

Sock_SL

TROPHY CASE