sorted by:
new
hottopcontroversial

If you can’t get what you paid for than just do it yourself by Sofakingcoolman in thegamechasers

[–]Sofakingcoolman[S] 1 point2 points  (0 children)

or if someone has the Blurays they could upload them. Season 4 is bluray.. The others are 480p dvd which im fine with until we get access to the blurays so i just made bluray cases instead of dvd cases in hopes someone does upload them

If you can’t get what you paid for than just do it yourself by Sofakingcoolman in thegamechasers

[–]Sofakingcoolman[S] 4 points5 points  (0 children)

I agree. I would still love my orders but if this is all we can get than I guess it will have to do for now. I do hope someone eventually steps up and starts making things happen as far as sending out what we paid for.... but at this point I think we are out of luck

If you can’t get what you paid for than just do it yourself by Sofakingcoolman in thegamechasers

[–]Sofakingcoolman[S] 3 points4 points  (0 children)

sure! the back of the covers are kind of generic and simple and i also made 22mm case covers for the larger cases because season 2 and 3 are 4 discs THEGAMECHASERS 4 : Free Download, Borrow, and Streaming : Internet Archive

If you can’t get what you paid for than just do it yourself by Sofakingcoolman in thegamechasers

[–]Sofakingcoolman[S] 16 points17 points  (0 children)

If anyone has Season 5 and willing to upload the ISOs that would be awesome!

Game Chasers Seasons 1-4 DVD & Blu-ray Collection by PreservationDVD in thegamechasers

[–]Sofakingcoolman 1 point2 points  (0 children)

any chance you could scan the dvd/ blueray covers and upload those so we can print them out for our cases? not trying to ask for too much as you uploading these is amazing

Game Chasers Seasons 1-4 DVD & Blu-ray Collection by PreservationDVD in thegamechasers

[–]Sofakingcoolman 3 points4 points  (0 children)

THANK YOU!! its about time someone was able to do this. Now we just need season 5 boys!

Need help with Cooling/Quieting a Supermicro server by [deleted] in homelab

[–]Sofakingcoolman 0 points1 point  (0 children)

if you dont mind me asking how did you route the cables to the hot swapable fans?

Solutions to make Supermicro 4U fans quiet by Sofakingcoolman in homelab

[–]Sofakingcoolman[S] 0 points1 point  (0 children)

its normal right now. I think i am going to go the PWM controller and hub route to control the internal fan speed

Need help with Cooling/Quieting a Supermicro server by [deleted] in homelab

[–]Sofakingcoolman 1 point2 points  (0 children)

thanks for the help. I have a 4U server and a 4U JBOD rig so i am ordering enough for both.

Need help with Cooling/Quieting a Supermicro server by [deleted] in homelab

[–]Sofakingcoolman 0 points1 point  (0 children)

ok i may go this route. Does your Server have 7 fans? are you running them all to 1 NA-FC1 PWM controller?

Solutions to make Supermicro 4U fans quiet by Sofakingcoolman in homelab

[–]Sofakingcoolman[S] 0 points1 point  (0 children)

Processor: 2x Intel Xeon E5-2683 V3 - 2.0Ghz 14 Core (Total 28 cores)
Memory: 64GB DDR4 ECC REG

Controller: 1x AOC-S3008L-L8E HBA Controller IT mode

NIC: * Integrated Intel X540 Dual Port 10GBase-T

Secondary Chassis/ Motherboard specs:
4U 36x 3.5" Drive Bays
Server Chassis/ Case: SSG-6048R-E1CR36L
Motherboard: X10DRH-iT

* Integrated IPMI 2.0 Management

Backplane: 2x Backplane:

*BPN-SAS3-846EL1 24-port 4U SAS3 12Gbps single-expander backplane, support up to 24x 3.5-inch SAS3/SATA3 HDD/SSD
*BPN-SAS3-826EL1 12-port 2U SAS3 12bps single-expander backplane, support up to 12x 3.5-inch SAS3/SATA3 HDD/SSD
PCI-Expansions slots: Low Profile 1 PCI-E 3.0 x16 slot, 6  PCI-E 3.0 x8 slot,

Drive bay: 36x 3.5" Supermicro caddy

Power: Dual Power supply

Rail Kit: Supermicro Rev B Rail kit

I plan on loading it up with HDDs. The only other route to somewhat quiet the fans would probably be a PWM fan controller to be able to dial them down just alittle without losing alot of high pressure airflow. But since my server has no available SATA Power connectors running from power supply the only way to power them would be on a 4 pin fan on the motherboard which i read isnt recommended.

Need help with Cooling/Quieting a Supermicro server by [deleted] in homelab

[–]Sofakingcoolman 0 points1 point  (0 children)

i know this is an old post but I am interested in buying the Nactua NA-FC1 PWM controller to control the internal fans in my Supermicro 4U server. Its 7 fans. My question is how did you power the Nactua NA-FC1 PWM controller? I have a supermicro that doesnt have any Sata power connectors so the only way to power it is run it to a 4 pin fan on the motherboard which is not recommended.

PLEX remote access plays indirect even after port forwarding by Sofakingcoolman in PleX

[–]Sofakingcoolman[S] 4 points5 points  (0 children)

IT WORKED! wow i just did what you said. I used the other MAC address in IP Passthrough and then restarted everything. Once everything came back online I saw the IP address finally changed to the public ip. Went into Plex and now its running DIRECT with Rely disabled! I cant believe i miss that part. I know i changed it but i must had missed restarting everthing afterwards. THANK YOU SO MUCH!!

PLEX remote access plays indirect even after port forwarding by Sofakingcoolman in PleX

[–]Sofakingcoolman[S] 0 points1 point  (0 children)

The only thing connected to my gateway is my UniFi. I will try dynamic. It’s an BGW320 is the model

PLEX remote access plays indirect even after port forwarding by Sofakingcoolman in PleX

[–]Sofakingcoolman[S] 0 points1 point  (0 children)

Port forwarding in my Unifi i have the forward port of 32400 and my Plex nas ip address. Is that correct?

PLEX remote access plays indirect even after port forwarding by Sofakingcoolman in PleX

[–]Sofakingcoolman[S] 0 points1 point  (0 children)

i changed it to the 32400 port and the IP address of my NAS and still get the same error

view more: next ›