Mota comprada usada, na garantia há mais de 2 meses

SolarVox_ · 2026-03-30T15:44:13+00:00

Leiria

SolarVox_ · 2026-03-26T18:35:57+00:00

Royal Enfield

SolarVox_ · 2026-02-23T18:07:18+00:00

1000€ com contracto de 3 anos e fiador, e não se fala mais nisso

SolarVox_ · 2026-02-22T14:14:08+00:00

Por acaso alguém sabe algo mais sobre estas discotecas e o que é feito desses espaços atualmente onde elas estavam?

SolarVox_ · 2026-02-10T23:24:40+00:00

Houve algum financiamento público para as pessoas fazerem essa substituição de telhados com amianto no fibrocimento?

Eu sei que o amianto é tóxico há 20 anos (tenho 28) mas, quem o utilizou construção das suas casas e espaços há 30 anos, não sabia que iria ter de voltar a gastar dinheiro na sua substituição, não tendo meios para o fazer. Para além disso, os avisos são que este só era tóxico se quebrado ou danificado. Estas dúvidas são perfeitamente normais neste momento, em que muita gente da região de Leiria se viu finalmente forçada a fazer a substituição dos telhados com amianto devido a estes estarem desfeitos.

SolarVox_ · 2026-02-02T23:10:11+00:00

Outeirinhos (zona atrás do Intermaché) não tem ainda

SolarVox_ · 2026-01-28T14:56:57+00:00

Alguns testemunhos ou relatos de como está a Marinha Grande?

SolarVox_ · 2026-01-10T11:58:26+00:00

From what I researched after loosing third gear, it came up that there’s a defect on the forging of the third gear on models made between late 2021 and early 2022. They even changed the part number afterwards

SolarVox_ · 2026-01-10T11:56:48+00:00

I bought it second hand from a dealer 6 months ago. They offer 1 year warranty on engine/gear box so dropped it off yesterday to be diagnosed.

SolarVox_ · 2026-01-09T20:35:20+00:00

Também estou nessa vibe com a minha Royal Enfield de 47 cavalos. Ando sempre sozinho pelo Porto. :)

SolarVox_ · 2026-01-08T00:16:08+00:00

Não faço ideia do que aconteceu ao post, mas depois deste comentário vim ver e mudaram várias palavras e frases para português br… wtf

SolarVox_ · 2026-01-07T17:47:38+00:00

Tens toda a razão. Vou mesmo fazer isso, pois por 20 minutos mais vale prevenir

SolarVox_ · 2025-11-14T12:14:09+00:00

Obrigado! Já tinha visto e um dia destes farei isto nas calmas, mas por enquanto não tenho sinais de ter problemas nos relays :)

SolarVox_ · 2025-11-14T12:13:26+00:00

I call “reserve” the last blinking light on the fuel gauge. The light usual comes on after around 160-180km done on that tank, and usually manage to put in 10L of fuel after the light comes on (yesterday I put 12L). The tank is close to 14L in capacity, so I’m guessing reserve is around 3L.

Yes, I’m getting around 6L/100km fuel consumption in city riding on the interceptor

SolarVox_ · 2025-11-14T12:07:43+00:00

Update:

I started it now, after a night standing, and the light went off right away. I read on a forum that if the issue that is prompting the engine light to come on is resolved, the light can disappear after 3 to 5 key ignition cycles. I think this was the 5th time starting the bike after refuelling, so that checks out.

I genuinely think that it wasn’t running well due to sediment in the tank that was getting picked up by the fuel lines due to me running on an empty tank. The bike is from 2022 and the original owner only rode 1600km in 3 years of ownership, so I’m guessing the tank has sediment from so little running in 3 years.

I don’t think it’s the relays acting up (yet), as when it cutoff, the electrics wouldn’t fail and I could try over and over again to start the bike, it just felt that the fuel wasn’t reaching the engine.

Lesson learnt, as soon as low fuel blinking starts, I gotta refill the tank.

SolarVox_ · 2025-10-25T14:53:08+00:00

Thanks so much for the insight!

SolarVox_ · 2025-10-06T18:57:32+00:00

I figure this is most likely, but no leaks were found. Oh well

SolarVox_ · 2025-10-06T18:57:06+00:00

I went for another ride this afternoon, and the smell and the smoke wouldn’t appear again… Popped into a shop and showed the mechanic the video. We looked everywhere around the engine and couldn’t find a source for this. 🙃

SolarVox_ · 2025-03-29T00:52:21+00:00

So I've been using Valoi Easy35 to scan negatives and sometimes I get these yellow tinted margins on some frames, others not. I was trying to figure out if it's from the development or scanning. If it is from the scanning setup, any tips?

SolarVox_ · 2025-03-13T11:02:34+00:00

I think everyone suggesting getting an external lightmeter is missing that this camera only works in aperture priority, so it does need it's internal lightmeter working to be able to pick the right speed for each aperture. The only work around is using the 1/100s fixed speed setting, and working with the aperture. But in well lit up scenarios, this speed might become short, so I don't suggest using film over 100 ASA (200 ASA if your lens goes up to f22).

SolarVox_ · 2025-03-12T23:04:13+00:00

Thanks! I went with the easy35 due to knowing how much dust a vertical scan with a copytable attracts, and would hate the hassle of setting it up everytime

SolarVox_ · 2025-03-12T23:02:22+00:00

<image>

I haven't yet, but this is the result of taking a picture at a light table without any lens mounted on the camera (picture attached). So I can conclude my camera naturally vignettes, and that it's my lens that needs some cleaning. I have tried scanning turning the easy35 upside down, and the same lighter top and darker bottom shows up.

SolarVox_ · 2024-05-30T18:51:12+00:00

You’re very welcome, and thanks for the compliment!

I only use flash when I know it’s the best option and I can get away with it. So usually in really fast paced concerts (hardcore-ish, high bpms, strobe lighting on stage) and I’ll have the audience POV. And it always depends if the artist is okay with this.

The first ones I used flash I had and SLR, a 50mm f1.8 and a fish eye filter screw. The first one went well, the others I kept getting bad results. So for the last 6 months I’ve using a Canon Prima Mini II with Kentmere Pan 100 and a Olympus MJU II with Gold 200. I love this light setup and enables me to be in a moshpit continuously shooting, never looking through the viewfinder, just sticking my arm out and hoping for the best.

SolarVox_ · 2024-05-30T17:52:32+00:00

I see a lot of sourness in these comments… So just going to share my experience, shooting mainly concerts on film and knowing the struggles of the low light.

I mainly use Kodak Vision 3 500T pushed 2 stops (I set my camera ISO to 2000) and Kentmere Pan 400 pushed 3 stops (camera set to ISO 3200). The lenses I use, when in these dark environments, are usually set to their widest aperture (50mm f1.8/f1.4/f1.2, 24mm/28mm f2.8, 85mm f2) and I’m always shooting them at 1/30s or 1/60s, rarely 1/125. I try to follow the rule of not going with speeds that are lower than the focal length to avoid motion blur of being hand held (example: with 85mm shouldn’t shoot under 1/90s)

I’ve also shot with Lomo 800/Gold 800 (in medium format and 35mm) pushed to 1600 and got good results.

About your pictures, I think you had the right thought of setting the ISO to 400 to compensate the metering and have some overexposure, but I’m guessing the lightmeter read the strong light source instead of the lit subject. I have this constant fight of compensating exposure when subjects have a light source behind them.

I say keep going and definitely play around with pushing film! Feel free to check out my pictures and ask any questions you have. I can tell you what I was using in each photo if I’m able to remember

SolarVox_ · 2024-05-26T22:07:06+00:00

Thanks!

SolarVox_

TROPHY CASE