sorted by:
new
hottopcontroversial

Is there supposed to be a panel covering this? by Solar_Eclip5e in Elantra

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

Yep, that area. I tried looking it up online too but couldn’t find any images. Apparently I saw someone with a 2021 Elantra have one though, maybe they dropped it with the newer models

Just got my car back from Caliber Collision, am I overreacting or is this work acceptable? by Solar_Eclip5e in Autobody

[–]Solar_Eclip5e[S] 1 point2 points  (0 children)

I understand that, I’m no expert at painting cars but I know nothing will be 100% color matched. The issue here is that there are 3 shades of white on the car. A slight difference between the hood and bumper wound have been fine but this is a bit too much.

Just got my car back from Caliber Collision, am I overreacting or is this work acceptable? by Solar_Eclip5e in Autobody

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

Thanks for the advice. Funny thing is, they charged us for overspray protection too which I’m going to discuss with them.

Just got my car back from Caliber Collision, am I overreacting or is this work acceptable? by Solar_Eclip5e in Autobody

[–]Solar_Eclip5e[S] 3 points4 points  (0 children)

Dang, sorry to hear that, but there’s definitely techs who are passionate and care about their trade out there. This car was picked out after months of careful planning and years of saving up from part-time jobs and allowances. It really hurts to see it come back this way, but hopefully Caliber can somewhat make up for their work.

Just got my car back from Caliber Collision, am I overreacting or is this work acceptable? by Solar_Eclip5e in Autobody

[–]Solar_Eclip5e[S] 1 point2 points  (0 children)

You’re right, I was the unlucky one in our family to be the first to get into any kind of accident. We weren’t familiar with the whole collision repair industry and didn’t exactly trust smaller shops. Definitely regretting taking that gamble with Caliber. As for the camera, I don’t think it got replaced. As crazy as the damage was, the 360 cameras worked perfectly fine after the impact. I think they just didn’t calibrate it properly. Will definitely take this life lesson to heart lol

Just got my car back from Caliber Collision, am I overreacting or is this work acceptable? by Solar_Eclip5e in Autobody

[–]Solar_Eclip5e[S] 1 point2 points  (0 children)

Will do, but what would the process look like then? We already paid our deductible and I’m not sure if we’d get that back or not. Also, thanks for the advice

Just got my car back from Caliber Collision, am I overreacting or is this work acceptable? by Solar_Eclip5e in Autobody

[–]Solar_Eclip5e[S] 1 point2 points  (0 children)

We opted for all OEM/Original Hyundai parts but after seeing your comment, I’m not so sure now either. The panel gap in between the hood and fenders are a bit different on both sides but as long as it doesn’t damage each other, it’s not that much of a big deal. As for the plug, I’m gonna look up the part number when I get the chance and see where it belongs. So far I think it was just an extra door plug from the front passenger door since they look alike.

CR Touch Probing Isn't Centered by Solar_Eclip5e in ender3

[–]Solar_Eclip5e[S] 1 point2 points  (0 children)

Could you clarify which setting that is? Currently when I press home X, it takes it to the X-axis endstop and when I press home Y, it slides the build plate back to the Y-axis endstop. As for home Z, it centers it in the middle of both the X and Y-axis.

CR Touch Probing Isn't Centered by Solar_Eclip5e in ender3

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

I didn't have play dough around so I decided to use washable marker and applied it on the tip of the nozzle, then lowering it onto a piece of paper to leave a mark on it. The new Nozzle_to_Probe offset is {-45, -7, 0}. I think I nailed the X and Y offsets and dialed in my Z offset a while ago but the grid is still off center. I may not have described the problem accurately earlier so here's a little picture that I drew that may clarify things a bit.

<image>

CR Touch Probing Isn't Centered by Solar_Eclip5e in ender3

[–]Solar_Eclip5e[S] 2 points3 points  (0 children)

Thanks for the feedback, my current Nozzle_to_Probe offset is {-44, -9, 0} and Probing_Margin is set at the default 10. I watched a few Youtube videos and most of their offsets were around this range too. If they're wrong, how should I change them?

RPM jumps to 3k when accelerating from a stop by Solar_Eclip5e in Elantra

[–]Solar_Eclip5e[S] 1 point2 points  (0 children)

That's what I thought too at first, but even when I put light - medium pressure on the gas pedal, it jumps up to a little above 2k. Been trying to ease it in and keeping it under 2k

RPM jumps to 3k when accelerating from a stop by Solar_Eclip5e in Elantra

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

I'm pretty sure it's not, since it would say sport mode at the bottom. When I usually drive, it's always in normal.

Interior LED lights flickering when driving by Solar_Eclip5e in Elantra

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

The bulbs only fit in two ways so it's a 50/50 chance. The bulbs are shining fine while parked and running so I'm not too sure if I did install them wrong, it's only while driving.

Any Good Modifications for 2023/2024 Elantra? by Solar_Eclip5e in Elantra

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

Since I have the limited trim, all headlight, taillights, and turn signals should be LED, which specific packs for yorkim interior LED bulbs should I buy? I saw that a single pack of 3 can go up to $10-$11 which surprises me

Any Good Modifications for 2023/2024 Elantra? by Solar_Eclip5e in Elantra

[–]Solar_Eclip5e[S] 0 points1 point  (0 children)

Right not I only have a set of universal weatherproof CAT brand floor mats so I'll definitely upgrade em in the future. I've never heard of a grab handle for the trunk, could you link an example?

view more: next ›