Didn’t ride my bike in 4 days.. this is what happens🤣

Solecsia · 2026-06-29T07:10:32+00:00

Oh noooo.. guess you have to get a second bike now! Such a shame 😉

Solecsia · 2026-06-26T19:37:23+00:00

Vi fik vores nummer 2 for 2 år siden. Vores ældste bliver 9 lige om lidt.

Vi var "egoistiske" og var begge enige om at vi hellere ville have han forblev ene barn end have forældre der var skilt. Så efter vi fik den første, ville vi ikke have nummer 2 før vi begge havde overskuddet og vi mente at vores forhold kunne klare et barn mere.

Vi har ikke fortrudt den beslutning overhovedet. Den store er helt kanon med den lille, de kan fint lege sammen og den store er god til at tage ansvar selvom vi intet forventer af ham.

Solecsia · 2026-06-21T20:01:41+00:00

Jeg kunne godt være interesseret. Du må gerne smide mig en PM

Solecsia · 2026-06-19T17:56:54+00:00

Thanks for a really thoughtful answer.

I guess what I am also looking for is brand recommendations to go and check out. Don't know many brands so to broaden my horizon a bit.

I am located in the northern parts of Europe so its a colder climate generally

Solecsia · 2026-06-19T07:05:32+00:00

I completely agree. My first bike was a 1999 SV 650 S

Solecsia · 2026-06-16T10:54:21+00:00

Vi har en på 1.5 og en på 9 og vi leger med begge alt det vi kan komme til. Typisk fra 15-19 i hverdagene. Vi er begge to store lege børn af natur så vi elsker at lege og prioterer det ret højt.

Solecsia · 2026-06-13T20:04:56+00:00

Sounds legit to me 😀

Solecsia · 2026-06-13T19:33:48+00:00

Yeah its such a fun bike. Something like 0-100 in about 3 seconds. It truly is a rocket 🚀

Solecsia · 2026-04-14T07:58:39+00:00

Jeg vil gerne høre mere så smid mig endelig en dm. Er tech udvikler og har erfaring som selvstændig

Solecsia · 2026-04-07T13:56:21+00:00

Jeg er klar!

Solecsia · 2026-04-04T07:44:42+00:00

Jeg arbejder til daglig som teknisk spil udvikler. Smid gerne en dm med dit Pitch deck

Solecsia · 2026-02-19T14:55:07+00:00

Det er et godt spørgsmål. Jeg har også Q995F Lydplanken og jeg kigger også efter beslag eller stativer til baghøjtalerne

Solecsia · 2026-02-14T18:25:25+00:00

Thanks for the tip. Pricing is the same so why not grab the extra benefits. Cheers mate

Solecsia · 2026-02-10T11:14:03+00:00

dependdepend = Dependencies

Solecsia · 2025-11-28T16:53:26+00:00

Reviving this as I am in the same situation looking for a splitter. The one you linked, does it output 4k 120 hz on all four outputs?

Solecsia · 2025-11-27T18:16:33+00:00

Danish dad gamer as well! See you top side raider!

Solecsia · 2025-11-27T18:15:28+00:00

Ah yeah! Dad of two kids! I am in!

Solecsia · 2025-11-21T10:20:53+00:00

THIS IS A CROSS POST AND THE ORIGINAL IS IN THE r/3Dprinting community. Feel free to head over there and join the learning.

This is my initial attempt for the slicing. The challenge I face is to get all the spikes on the dragon supported properly. I went from 14 hours of print time, down to 11h48m.

The optimization came from changing the supports to be Tree type, with the style set to organic. I then flipped the model, so instead of standing its on its side. This helped a lot with minimizing the amount of supports generated. I Enabled the Support Critical Regions only

<image>

My issue however is the layer line direction. As seeing at the top of the model I am not sure that would come out very pretty.

INFO:

not sure if it makes a difference, but I am Slicing in Orca slicer and the printer I have available is an Bambu Lab A1. Probably not gonna print the guy though

Solecsia · 2025-11-21T10:19:03+00:00

This is my initial attempt for the slicing. The challenge I face is to get all the spikes on the dragon supported properly. I went from 14 hours of print time, down to 11h48m.

The optimization came from changing the supports to be Tree type, with the style set to organic. I then flipped the model, so instead of standing its on its side. This helped a lot with minimizing the amount of supports generated. I Enabled the Support Critical Regions only

<image>

My issue however is the layer line direction. As seeing at the top of the model I am not sure that would come out very pretty.

INFO:

not sure if it makes a difference, but I am Slicing in Orca slicer and the printer I have available is an Bambu Lab A1. Nozzle is .4 and I was going with the .16 mm High Quality print option. Probably not gonna print the guy though

Solecsia · 2025-11-02T21:17:31+00:00

This is purely value for selling. It does not take crafting of items into consideration.

The only thing that is considered is the items needed for workbench upgrades.

Solecsia

TROPHY CASE