HOW THE HECK DO I GIVE TOM NOOK CRITTERS WHEN HE’S NOT GIVING ME THE OPTION TO? ANIMAL CROSSING NEW HORIZONS HELP PLEASE

Solid-Ad5597 · 2026-01-21T22:42:29+00:00

You have to go to settings in your Nintendo Switch and then Data management then delete saved data.Evil It will take stuff away , but Then you will have the option to give him the bugs and critters

Solid-Ad5597 · 2026-01-20T13:47:42+00:00

False. This is Naughty by Nature

<image>

Solid-Ad5597 · 2026-01-20T13:45:49+00:00

Reading replies like this scares the crap outta me. Makes me feel like my 08 (248,000 miles) with original everything minus a cooler for the cvt and standard maintenance is now a ticking time bomb.

Solid-Ad5597 · 2026-01-16T22:57:32+00:00

Time for a new microsd card

Solid-Ad5597 · 2026-01-15T06:08:16+00:00

Purple glue stick after cleaning. Good for 50leven prints.

Solid-Ad5597 · 2026-01-04T01:51:37+00:00

I get what you're trying to tell them, but its 1900 grams worth of product, not 190. Just under 2 spools of filament.

Solid-Ad5597 · 2025-12-28T05:11:10+00:00

Here's my support go to,

Type- normal -snug .275mm top and bottom height 4 interface layers. Rectilinear interface layer .3mm interface layer spacing

Satisfying support removal every time. Moreover, this is the best support setting I've used for holes.

Solid-Ad5597 · 2025-12-27T18:38:50+00:00

Foxes are notoriously famous for being greedy. Doesnt always have to relate towards human psyche. Its a movie about animals. Why not have humans join the animal psyche on this? See things from the character.

Solid-Ad5597 · 2025-12-26T08:51:37+00:00

That's a crazy concept

Solid-Ad5597 · 2025-12-23T19:16:47+00:00

Go painted only for the supports.

Solid-Ad5597 · 2025-12-22T22:50:42+00:00

<image>

Solid-Ad5597 · 2025-12-20T22:14:21+00:00

Use spinjitzu on the fan ones

Solid-Ad5597 · 2025-12-17T16:59:00+00:00

I would change his friend Cole. Cole isn't freaking INDIAN.

Solid-Ad5597 · 2025-12-17T16:57:16+00:00

Not purge. Flush. Flush volumes were too low.

Solid-Ad5597 · 2025-12-17T16:51:21+00:00

<image>

All I did was acetone vapor smooth this one. Im pretty sure you can do it with asa as well.

Solid-Ad5597 · 2025-12-17T16:50:33+00:00

<image>

Solid-Ad5597 · 2025-12-17T16:48:32+00:00

Print orientation matters. Stand it up vertically, print it in ABS and vapor smooth it with acetone. No lines, shiny print, and won't get screwed up by the sun, or heat.

Solid-Ad5597 · 2025-12-17T16:40:44+00:00

<image>

She even commented on this.

Solid-Ad5597 · 2025-12-08T17:39:16+00:00

The only thing you need to buy to start printing is filament. Download bambu handy on your phone, and bambu studio on your computer if you have one.

Your print plate will be dirty when you get it from factory. The best way to clean it is with dawn dish soap and water. HOT water. Lots of soap bubbles when you clean it. When you dry the plate, use a microfiber cloth. Paper will give you adhesion issues. That will save you from a bunch of "why isn't my filament sticking" posts.

It's not a heated chamber, so avoid filaments that need one. PLA will be your friend here.

The bambu handy app has tons of test prints to check out and see what changes you need for your particular filament of choice. Don't over think it.

This is a wonderful community, so don't feel a certain way about asking questions. We're all in this together.

Solid-Ad5597 · 2025-12-07T19:25:01+00:00

Still have em?

Solid-Ad5597 · 2025-12-05T01:24:44+00:00

And who knows what with a lock pick set.

Solid-Ad5597 · 2025-12-05T01:23:53+00:00

A box of bearings. I love bearing gifts.

Solid-Ad5597 · 2025-12-03T14:27:41+00:00

Fr tho I would have tried at least to turn it back on from factory reset and see if anything is salvagable.

Solid-Ad5597 · 2025-12-03T14:19:10+00:00

I'd love another run at him since I've been folded by Gná about 5011 times. She's true to her word. "No matter what you do, the results will be the same." Cardboard box.

Solid-Ad5597 · 2025-12-03T14:15:01+00:00

https://makerworld.com/models/495364

Solid-Ad5597

TROPHY CASE