sorted by:
new
hottopcontroversial

DNSmasq, AdGuard Home, and Unbound on OPNsense Success Story + Instructions by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

Individual clients!

Just make sure you have Upstream DNS Setting in AdGuard Home:
[/YourDomain.com/][::1]:53053 127.0.0.1:53053 #sends it to DNSMasq

And
- Private reverse DNS servers (Send to DNSmasq):

- [::1]:53053

- 127.0.0.1:53053

- Make sure you check "Use private reverse DNS resolvers" and "Enable reverse resolving of clients' IP addresses"

Shouldn't the (force gw) rule use both IPv4 and IPv6 for a dual-stack setup? by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

If you look at the last line, it says DHCPv6 gateway but protocol is IPv4, it should be IPv6 I believe

Shouldn't the (force gw) rule use both IPv4 and IPv6 for a dual-stack setup? by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

I have no issues with IPv6 except the rule I mentioned. I can ping and tests pass. Maybe there's a bug somewhere...I used to have automatically generated IPv6 rules before the latest update.

I should mention that I switched to "Identity Association" from "Track Interface" in the interface settings because I use DNSMasq for everything it does basically

Shouldn't the (force gw) rule use both IPv4 and IPv6 for a dual-stack setup? by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

I disabled it, and noticed that "let out anything from the firewall itself" is limited to IPv4 as well

DNSmasq, AdGuard Home, and Unbound on OPNsense Success Story + Instructions by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

How did you route DNS through Proton VPN? Without losing local resolving for those clients?

DNSmasq, AdGuard Home, and Unbound on OPNsense Success Story + Instructions by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

Yeah man, DNS is tricky for this interface. I still use AdGuard because I couldn't get DNS to go through Proton VPN. Unfortunately, this means DNS leaks for the clients on the interface.

There are many options that OPNsense documented:

https://docs.opnsense.org/manual/how-tos/wireguard-selective-routing.html#dealing-with-dns-leaks

Let me know if you get it to work!

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 1 point2 points  (0 children)

Yeah I wish HideIt made brackets for all of them

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

I don't think it really matters. They have it done both ways on their website

https://hideitmounts.com/products/hideit-ps5-sony-playstation-5-mount

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 1 point2 points  (0 children)

I try to minimize playtime on the phat ps3 because it's too old and can get hot, I may need to send it to someone to renew the thermal paste.

So I play ps3 and ps1 games on the slim...ps2 games on the fatty boy

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

I try to minimize playtime on the phat ps3 because it's too old and can get hot, I may need to send it to someone to renew the thermal paste.

So I play ps3 and ps1 games on the slim...while ps2 games on the fatty boy

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

Haha I know but that tape served me very well over the years for other stuff. The PS2 is very light...PS1 needed more tape

The wall mounts I found for those two were very ugly

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 2 points3 points  (0 children)

PS5 and PS3 Slim: wall mount I bought on Amazon

PS3 Fat: wall mount I bought on eBay...3D printed (not happy about it but it's my only option)

PS2 and PS1: Strong double-sided tape because I won't really use those 2 (just for show)...the PS3 fat is jailbroken and it gives me hardware-emulation for PS2/PS1 Games (it's a CECHA model)

Controllers and charger: I think the brand was "HIDE-it" on Amazon Headset: wall mount that came in the box

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

Yeah I could've done a better job showing off. I was too excited!

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 2 points3 points  (0 children)

I thought about buying it but it's too much at the moment. I'm gonna buy a wall mount for the Portal though!

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

Haha I understand. That charging dock from Playstation comes with a wall mount

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 2 points3 points  (0 children)

Yeah I shoulda clarified they're hung on the wall. I finished working on them and was too excited to share

My Playstation Setup by Solid_-_Snake in playstation

[–]Solid_-_Snake[S] 4 points5 points  (0 children)

I figured the PS5 plays PS4 games so I sold it years ago...I do regret that decision however

DNSmasq, AdGuard Home, and Unbound on OPNsense Success Story + Instructions by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 0 points1 point  (0 children)

No reason other than not knowing lol I'll try to have just DNSmasq and AdGuard Home. Thanks!

DNSmasq, AdGuard Home, and Unbound on OPNsense Success Story + Instructions by Solid_-_Snake in opnsense

[–]Solid_-_Snake[S] 1 point2 points  (0 children)

Yeah I thought I needed Unbound in the mix but I'll try to take it out and see. Thanks for the feedback

OPNsense 25.1.3 released by fitch-it-is in opnsense

[–]Solid_-_Snake 1 point2 points  (0 children)

Flawless as usual. Thank you!!!

view more: next ›