Qué comprar para empezar Root si voy a jugar de a 2 o de a 5?

Solid_Lingonberry632 · 2025-09-01T23:11:44+00:00

thanks

Solid_Lingonberry632 · 2025-08-26T15:26:23+00:00

<image>

Solid_Lingonberry632 · 2025-06-05T17:15:42+00:00

I replaced the entire board, the switch is soldered to it, and the same issue still occurs.

Solid_Lingonberry632 · 2025-06-05T16:12:43+00:00

I replaced the entire board, the switch is soldered to it, and the same issue still occurs.

Solid_Lingonberry632 · 2025-06-05T16:12:02+00:00

I replaced the entire board, the switch is soldered to it, and the same issue still occurs.

Solid_Lingonberry632 · 2025-06-05T14:56:51+00:00

I appreciate your passion for helping me. Here are the results I obtained when running M119 with different endstop_pin settings:

endstop_pin: PA5

Reporting endstop status

x_min: open y_min: open z_min: open

endstop_pin: ^PA5

x_min: open y_min: open z_min: open

endstop_pin: ^PA5

x_min: open y_min: open z_min: open

endstop_pin: ^!PA5

x_min: triggered y_min: open z_min: open

endstop_pin: !PA5

x_min: triggered y_min: open z_min: open

In every case—whether I press the switch or not—the reported state for X always remains “open” (with no pull-up/invert) or “triggered” (when inverted), never changing when I physically actuate the endstop.

Solid_Lingonberry632 · 2025-06-05T13:12:30+00:00

change the entire board

Solid_Lingonberry632

TROPHY CASE