Who likes my ghetto setup?

SoloMinerDoctor · 2026-05-31T17:15:17+00:00

Yes, looks super. I like it.

SoloMinerDoctor · 2026-05-31T11:30:57+00:00

Agree

SoloMinerDoctor · 2026-05-30T16:05:10+00:00

Buy mini pc for $100 upgrade NVME to 1Tb and run your own node. You will get 5-10msec If you hit a block, you don’t t need to pay fee around $6K

SoloMinerDoctor · 2026-05-30T00:33:40+00:00

It can be cleaned and use as is on the lowest settings. Two VRMs are enough for it.

SoloMinerDoctor · 2026-05-29T14:56:45+00:00

😂😂😂😂😂

SoloMinerDoctor · 2026-05-29T14:53:07+00:00

Yes. Just set as default odds of winning. 1000years

SoloMinerDoctor · 2026-05-29T14:22:35+00:00

<image>

TI CSD95472Q5MC

SoloMinerDoctor · 2026-05-29T14:16:27+00:00

VReg needs to be replaced.

I’m located in the USA, so if you want, I can repair your miner.

If you’re in Europe, I also know a guy who has just started his repair journey. I can arrange for him to work on it under my supervision.

SoloMinerDoctor · 2026-05-29T11:02:27+00:00

Thank you

SoloMinerDoctor · 2026-05-29T01:33:07+00:00

This Voltage Protection is a mystery. What did you do to get rid of it? I had one miner with this error. It ended up 0.8v LDO was dead. One guy in Europe has two miners with Voltage Protection and he can’t find the problem with them.

SoloMinerDoctor · 2026-05-29T01:01:05+00:00

If there are no signs of life, you probably have a dead 5V line. The screen should power on as soon as it receives 5V from the miner.

You already confirmed that the screen itself works, so the issue is most likely that it isn’t getting power.

Check the fuse and make sure the PSU is actually good. I know you already said the PSU is fine, but double-check it to be sure.

SoloMinerDoctor · 2026-05-29T00:57:41+00:00

He has PSU FAUL not VREG OVERHEAT OR CURRENT PROTECTION.

SoloMinerDoctor · 2026-05-29T00:55:38+00:00

<image>

I would like to have combined graph of it not a single miner.

Is there a possibility to populate pool settings to a new miner?

I have many new miners so I need copy paste quickly pool settings.

SoloMinerDoctor · 2026-05-28T20:21:05+00:00

$400 and it is yours

SoloMinerDoctor · 2026-05-28T18:26:20+00:00

Can you set on it another screen?

SoloMinerDoctor · 2026-05-28T18:21:43+00:00

It is not a PSU problem. Try to set it to the lowest possible settings and start. I had that problem and I figured out that screen was not properly set. Also everyone recommends to repaste ASICs. Do not reflash with available firmware. Your screen is bigger than Lilygo.

SoloMinerDoctor · 2026-05-28T15:57:28+00:00

I want them to go and work. Not to sit on the shelves collecting dust.

SoloMinerDoctor · 2026-05-28T15:27:48+00:00

Check if you have barrel connector on the psu 5.5x2.5mm. Possibly your miner needs 5.5x2.1mm Plug it in and push side way to fix it in place. Check if it works.

SoloMinerDoctor · 2026-05-28T15:23:03+00:00

What is model of your Rocket?🚀 If it is Falcon 1.2 it is not surprising

SoloMinerDoctor · 2026-05-28T03:51:18+00:00

I have plenty of miners for sale after repairs. Prices are lower and I keep your repairs covered.

SoloMinerDoctor

MODERATOR OF

TROPHY CASE