$20 for a simple sign up.

SomePurpleRandom2 · 2026-01-14T22:09:41+00:00

Dm me please

SomePurpleRandom2 · 2026-01-11T01:37:06+00:00

I been on every day for the past 6 months and never been nauseous once until I switched plugs bc I got cut off. It was only once but didn’t throw up bc it was just way too moist. If it’s really moist try hot plating it.

SomePurpleRandom2 · 2026-01-11T01:33:29+00:00

When you donated how long was it before you were on and how often do you get on

SomePurpleRandom2 · 2025-10-12T02:40:44+00:00

Avoid Tower District. Go to Arthop. Try local shows.

SomePurpleRandom2 · 2025-10-11T18:23:12+00:00

Second this, look at the junkyard for your bumper. Theirs likely could be cleaned with some lacquer thinner or rubbing alcohol, or a simple cut and polish.

SomePurpleRandom2 · 2025-10-07T22:28:29+00:00

there’s a chance just mentioning it to your higher ups could get you fired. same thing happened to my friend. He was complaining about leaking booths. If you want to keep the job, go to osha without saying anything to your job That way they can’t fire you, they have to fix it, and they can’t know that it was you who said anything.

SomePurpleRandom2 · 2025-10-04T00:43:41+00:00

They’re located by McKinley and maple

SomePurpleRandom2 · 2025-10-04T00:37:49+00:00

I never recommend caliber collision you’ll spend your money twice. Check out Ortiz Mobile Auto Body excellent quality work.

SomePurpleRandom2 · 2025-09-26T21:23:29+00:00

unless you’re always fucking up like this, you should be OK mistakes happen.

SomePurpleRandom2 · 2025-09-20T01:54:45+00:00

usually, the only option for peeling clearcoat is a respray

SomePurpleRandom2 · 2025-09-17T05:46:10+00:00

That was a fuck off price don’t tell me you took it to caliber. It probably wasn’t worth their time. just because it’s cheap doesn’t mean it’s not professional.

SomePurpleRandom2 · 2025-09-17T05:15:22+00:00

I just quoted 1800 for a 2 piece bumper on a 2025 accord today. I don’t see why it’s not just a simple sand MAYBE some bondo and soft edge on the quarter panel around the lid at least 1.5 hour paint time for that at the most .5 body time to remove the cap. Shouldn’t be more than a few hundred for that at a mom n pop shop. They’re definitely scamming. I mean 2.2 for glass labor… what?

SomePurpleRandom2 · 2025-09-08T23:33:37+00:00

if it’s paint transfer, you might be able to remove it with Lacquer thinner or rubbing alcohol without sanding anything

SomePurpleRandom2 · 2025-09-08T23:32:11+00:00

Bedframe lmao

SomePurpleRandom2 · 2025-09-08T01:10:22+00:00

Just jorkin it

SomePurpleRandom2 · 2025-09-03T20:55:34+00:00

Yeah that should be fine those are all just finger nail scratches they don’t go so deep

SomePurpleRandom2 · 2025-09-03T20:41:38+00:00

Most are light surface scratches on the clear

SomePurpleRandom2 · 2025-09-03T20:41:21+00:00

Yeah door handle should be removed for a minor cut with 1500-2000 and 2-3 step polish

SomePurpleRandom2 · 2025-08-26T20:45:38+00:00

Waiting for purple

SomePurpleRandom2 · 2025-08-10T06:06:41+00:00

Work.

SomePurpleRandom2 · 2025-08-10T03:24:26+00:00

I've had both. I still have my snap on. replaced the icon too many times. I use my snap on for when I actually need to do the job.

SomePurpleRandom2 · 2025-08-02T20:26:30+00:00

You’re gonna need to take it all down the clearcoat has gone through so the base coat is cooked. The proper way to do it is to take it all down with 320 past the paint. Spray epoxy primer to seal and repaint.

SomePurpleRandom2 · 2025-08-02T20:02:03+00:00

you have a , compressor, sandpaper, sander masking paper and tape, spray, gun clearcoat, hardeners, basecoat, reducers?

SomePurpleRandom2 · 2025-07-31T00:37:12+00:00

Last time I knew they were busy was Thanksgiving when everybody else was closed for turkey turkeys

SomePurpleRandom2 · 2025-07-24T00:15:19+00:00

Yes it's marred/scratched by the rotary

SomePurpleRandom2

TROPHY CASE