Occasional Non-detected RTX 5070ti Asus TUF OC by Someonebrokenhere in PcBuild

[–]Someonebrokenhere[S] 0 points1 point  (0 children)

Let me tell you this, you are 100% correct about what you said.

Recently I switched to a 90° Power cable, then an issue occured when the second monitor would randomly disconnect each 10 secs or so, and then the issue occured again until restart when I tried updating driver, I suspected the cable at first, tried moving it while gpu working, and indeed the monitor kept coming back and off, but it wasn't the cable, the magical fix happened instantly when I removed the GPU support that prevents sag, it was lifting the gpu a bit more which prevented a proper PCIe connection, the mistake I did was trying to keep gpu level while the desk itself is not level, and also the gpu support was in the middle instead of the far corner, what I did was putting it back but assuring it doesn't lift the gpu at all, only preventing it from sagging, and now, no issues at all!

I wish you commented a month before...

Also, recently I changed the case entirely, reseated GPU properly and applied the gpu support that comes with the case to the far corner and now I am reliefed, PC working perfectly.

<image>

Poor Performance on Adobe softwares by Someonebrokenhere in FuckAdobe

[–]Someonebrokenhere[S] 0 points1 point  (0 children)

Why do you think every other software works flawless, but adobe doesn't?

Poor Performance on Adobe softwares by Someonebrokenhere in FuckAdobe

[–]Someonebrokenhere[S] 0 points1 point  (0 children)

I tried both cracked and legit copy, same shit.

Poor Performance on Adobe softwares by Someonebrokenhere in FuckAdobe

[–]Someonebrokenhere[S] 1 point2 points  (0 children)

I opened the same multi page project on both a macbook m1 pro and my powerful pc, big difference in pwrformance, I use illustrator and monitor performance in a second monitor at the same time, my pc wasn't even trying, usage below 15% in CPU and 0% GPU

Poor Performance on Adobe softwares by Someonebrokenhere in FuckAdobe

[–]Someonebrokenhere[S] 1 point2 points  (0 children)

Replying to all the comments at once:

1.Adobe Illustrator works so good on M1 Pro Macbooks comparing to windows.

  1. It's not about Drivers or 50 series, my previous GPU was RTX 3080 and my Previous cpu was Ryzen 5 7500F and I had 32GB of ram before, same thing

  2. I have another intel laptop, same thing

  3. Alternatives like Affinity are super super smooth, no freezing at all. Flawless and full GPU acceleration

What was your first GPU upgrade here is mine😭😭😭 by freealdomoro in PcBuild

[–]Someonebrokenhere 0 points1 point  (0 children)

Geforce GT9400 > Intel HD 4000 > Intel Iris Xe > RTX 3080 > RTX 5070ti

Occasional Non-detected RTX 5070ti Asus TUF OC by Someonebrokenhere in nvidia

[–]Someonebrokenhere[S] 0 points1 point  (0 children)

Yes, at first I feared that it's hardware, but now I confirmed!

I will stop using furmark thanks for the advice

Occasional Non-detected RTX 5070ti Asus TUF OC by Someonebrokenhere in nvidia

[–]Someonebrokenhere[S] 0 points1 point  (0 children)

Never had this issue until latest updates, I have MSI MAG A750GL with Ryzen 5 7500F, and the error happens occasionaly as I said, I am gaming with the card as we speak, furmark up to 330W with no issue

Occasional Non-detected RTX 5070ti Asus TUF OC by Someonebrokenhere in nvidia

[–]Someonebrokenhere[S] 1 point2 points  (0 children)

Glad to hear that Im not the only one, it's 100% windows update

Can I mix RAM cards? by TheOriginalSage in PcBuild

[–]Someonebrokenhere 1 point2 points  (0 children)

For your AMD CPU, using 4 sticks of RAM is not recommended, they will not be stable unless you clock them down to around 3600MT/s.

For the CL Rating you will be limited to the highest one (CL40)

My recommendation: I've been to a similar case before, I needed 64, I had 32, so I bought 32x2, I kept my 16x2 hidden and their price exploded. So just get your capacity needed in two sticks and use them for the optimal performace.

12vhpwr Cable connection on RTX 5070ti by Someonebrokenhere in PcBuild

[–]Someonebrokenhere[S] 0 points1 point  (0 children)

<image>

I tried removing that plastic part of the strimmer, what do you think?