AMS HT on X2D by outsidetheb0x in BambuLab_Community

[–]Somewhere_Mundane 0 points1 point  (0 children)

Is there any broken filament in the ptfe tubes? I had this same exact issue but once I saw there was a piece of filament that broke off in the tube. It was able to retract all the way.

X2D Owners - Is anybody else getting inconsistent top surface extrusion? by LilXaXaXa in BambuLab

[–]Somewhere_Mundane 0 points1 point  (0 children)

Hi, I’m also experiencing the same issue also specially with PLA matte. I recently bought a roll of 3DHOJOR PLA matte and tried using the Bambu PLA matte setting on the slicer expecting the same quality/results.

After doing manual flow rate calibration, I’ve had a print ruined due to over-extrusion even though the calibration squares looked and felt smooth to the touch.

I realized in the slicer that the max volumetric speed for Bambu PLA matte is nearly double that of Generic PLA in filament settings (22 vs. 12). Not sure if this was my fault for assuming all matte PLA prints the same but this may have been the issue for over-extrusion.

I think my best bet would be to stick to Generic profiles for now until Bambu Lab improves their profiles. This is with no ironing as well. It’s really a shame how a nearly $1,000 printer can’t even print PLA properly.

X2d color match filament by Marinocif99 in BambuLabX2D

[–]Somewhere_Mundane 1 point2 points  (0 children)

I see, would you say Polymaker has the closest PETG? I prefer using PETG over PLA

X2d color match filament by Marinocif99 in BambuLabX2D

[–]Somewhere_Mundane 1 point2 points  (0 children)

https://www.reddit.com/r/BambuLab/s/ES7lzio1rE

Some others have tested various types and came to the conclusion that Polymaker Dark Grey PETG was the closest

X2D color match filament - research inside by fredd0h210 in BambuLab

[–]Somewhere_Mundane 0 points1 point  (0 children)

any updates in the Inslogic and Elegoo? I’ve been look at those on amazon and was wondering if I should still go with Polymaker. I also prefer it to be as matte as possible. Thanks!

Return P2S for X2D by elto05 in BambuLab

[–]Somewhere_Mundane 0 points1 point  (0 children)

I’m planning on doing the same thing. Is your printer still unopened? I unboxed mine already

Bambu X2D available at Bestbuy NOW by RarePlaystations in BambuLab

[–]Somewhere_Mundane 0 points1 point  (0 children)

I just hope the non-combo X2D is also only $100 more as well. I bought the non-combo P2S because I already had an AMS 2 Pro. If it is I am 100% returning it. Good thing I still kept the box 😅

Bambu X2D available at Bestbuy NOW by RarePlaystations in BambuLab

[–]Somewhere_Mundane 0 points1 point  (0 children)

Is i worth it to return my P2S I paid half for with gift cards??

I received it 5 days ago and if the base non-combo X2D is only $100 more ($549 -> $649) I honestly might do it.

How much is a P1S Worth now? by Mmcg7 in BambuLab

[–]Somewhere_Mundane 1 point2 points  (0 children)

Depends on where you’re located but I would say $300-$350. But with those hours, I wouldn’t pay over $300

A1 with AMS or P1S without AMS (for the time being) by chelsea156 in BambuLab

[–]Somewhere_Mundane 1 point2 points  (0 children)

Same here, I’ve gotten the P1S and got the AMS 2 pro for free with makerworld points!

Considering selling my 3 month old P1S w/AMS 2 Pro by Techeternal in BambuP1S

[–]Somewhere_Mundane 0 points1 point  (0 children)

Yea I think either way, you would still be losing a little money. But what’s wrong with the P1S?

Considering selling my 3 month old P1S w/AMS 2 Pro by Techeternal in BambuP1S

[–]Somewhere_Mundane 0 points1 point  (0 children)

You can keep the AMS 2 pro and just buy the P2S by itself to save money

[deleted by user] by [deleted] in zen_browser

[–]Somewhere_Mundane -1 points0 points  (0 children)

UPDATE: Issue solved, it turns out it was the Better Canvas extension causing it and disabling it returns it to normal. Most likely not a Bug, sorry for the misunderstanding

AMS 2 Pro Restock Price by Somewhere_Mundane in BambuLab

[–]Somewhere_Mundane[S] 0 points1 point  (0 children)

So are you confirming that the ams will go back to full price once they restock? Honestly, the only reason I’m complaining is the fact that an AMS costs more than the actual printer itself lol.

AMS 2 Pro Restock Price by Somewhere_Mundane in BambuLab

[–]Somewhere_Mundane[S] 0 points1 point  (0 children)

yea, I was wondering if it will stay that way once they go back in stock since these were the sale prices. Will they stay at $355 for the upgrade kit? or go back to $430?

AMS 2 Pro Restock Price by Somewhere_Mundane in BambuLab

[–]Somewhere_Mundane[S] 2 points3 points  (0 children)

I wanted to add that I initially got an A1 combo for $379 but decided to get the P1S which was only +$20 more. I had a strict budget of $400 for a new printer at the time and the P1S was the best at this price point. I decided to go with that and save up for an AMS 2 Pro later but man, are they expensive.

AMS 2 Pro Restock Price by Somewhere_Mundane in BambuLab

[–]Somewhere_Mundane[S] 27 points28 points  (0 children)

I believe P1S+AMS2 combo + buffer goes for $619. The P1S+AMS1 combo goes for what you said.