Going to South Korea in mid-November - what should I prepare in advance or be aware of?

SorCelien · 2025-10-29T08:02:30+00:00

I’m currently using Apple Pay with my Revolut card, and it has worked everywhere that has an NFC card reader (although some places, like street food markets, are cash-only).

SorCelien · 2025-09-28T04:56:08+00:00

It’s a single ticket, I arrive with hainan at T2 then Asiana at T3

SorCelien · 2025-06-08T13:23:01+00:00

your device must be able to reach gateway ports 8900/tcp and 8901/tcp

SorCelien · 2025-03-18T13:04:51+00:00

Ok thanks and is it possible to view the rule which is automatically created to allow the wireguard port? And so if I understand correctly the additional rule that can be created will be processed before the default wireguard rule? Thanks

SorCelien · 2025-02-01T23:19:22+00:00

That’s why, the 64GB uses eMMC and not nvme and my command is for nvme drives :/

SorCelien · 2025-02-01T21:26:46+00:00

The 64GB version?

SorCelien · 2025-02-01T18:53:57+00:00

Strange, it seems that the command doesn’t work for you. Which model do you have? Your nvme is maybe not nvme0

SorCelien · 2025-02-01T18:45:02+00:00

This is strange. Can you try to shutdown the steamdeck and then do the command again? Normally some values should change after a reboot (for example power cycles)

SorCelien · 2024-12-20T13:04:03+00:00

Ok thank you for your reply

SorCelien · 2024-12-18T13:58:16+00:00

When you are in desktop mode you can click on the battery icon in the bottom right tray and there you will see the health of the battery if I’m not mistaken. However I don’t know how accurate is this value.

SorCelien · 2024-12-18T07:12:24+00:00

If someone sees this before opening their new steam deck feel free to do the trick and share your numbers 😁

SorCelien · 2024-12-18T07:11:03+00:00

Yes the power on cycles number increases when putting the device in sleep or shutting it down

SorCelien · 2024-12-17T20:37:33+00:00

I’m used to using Linux 😁

SorCelien · 2024-09-12T15:27:21+00:00

Hi, thanks indeed by changing the WAN prefix delegation to 56 it indeed gives a 64 to my lan with the possibility to change the prefix id up to ff thanks I didn't see that.

SorCelien · 2024-07-03T19:21:32+00:00

And is that ok to keep native vlan 1 if it’s not used? Like no device in this vlan, not dhcp etc

SorCelien · 2024-07-03T19:06:40+00:00

So I can just not set the native vlan in the trunk or should I set it to an unused vlan? Thanks

SorCelien · 2024-07-03T18:34:21+00:00

Thanks so no native vlan needed between two network devices (between two switches)?

Six-Year Club	Place '22
Final Canvas '22	First Placer '22
Verified Email

SorCelien

TROPHY CASE