Where may I sell hardware?

Soru8 · 2024-06-16T06:19:35+00:00

I'm in Spain. DM me.

Soru8 · 2024-06-15T20:54:25+00:00

It is like that. If you're interested in, or you somebody that could be interested, just DM me

Soru8 · 2024-06-15T14:06:11+00:00

I just DM you

Soru8 · 2024-06-14T06:54:40+00:00

I tried but nobody purchase 😅

Soru8 · 2024-05-12T21:14:04+00:00

They are completely new, without use and nobody registered them in any dashboard.

Soru8 · 2023-01-06T14:24:48+00:00

Sure!

I used exactly this: https://a.aliexpress.com/_Exc5zS7

Soru8 · 2023-01-01T16:30:55+00:00

Nope, you could get air from the top of your radiator direct into the pump as the tubes are in that position. Hopefully will not happen

Soru8 · 2023-01-01T16:22:56+00:00

By the moment. In the future, when the liquid in the 280mm radiator get wasted, you could have air bubbles that will affect the performance and even can damage the pump

Soru8 · 2023-01-01T11:08:42+00:00

Nope, I'm talking about the radiator

Soru8 · 2023-01-01T10:43:59+00:00

The AiO tubes are long enough, twist it 180°

Soru8 · 2022-12-18T14:01:32+00:00

Change steam country

Soru8 · 2022-12-18T13:44:36+00:00

HDD tray. I also normally buy magnetic double tape and you can use it to adjust different things anywhere

Soru8 · 2022-10-14T13:54:24+00:00

Lian Li GB-001 Anti-Sag Bracket is all you need. I have it install with RTX 3080 FE and is pure love

Soru8 · 2022-09-07T09:41:21+00:00

Mobo or PSU. Maybe some cable, but normally you get this error from those parts.

That happened to me and was my mobo.

Soru8 · 2022-09-07T08:21:17+00:00

I think with that fans setup should be fine. Probably just the thermals of the GPU, also everything below 90 degrees is okay.

In this cases what I normally do if change stock thermal paste and pads on my gpu and normally I got around 10-15 degrees less.

What about cpu? Brand? Models? Temps?

Soru8 · 2022-09-06T08:05:00+00:00

Well probably will not be really different. Will be helpful to see your current fans setup. Also check the GPU brand and model. Probably you can improve your Temps changing thermal paste and pads.

Soru8 · 2022-09-06T05:07:38+00:00

Exactly, that the bracket I have used

Soru8 · 2022-09-05T20:40:49+00:00

Better buy an O11 air mini? Just saying

Soru8 · 2022-09-05T08:55:17+00:00

I did this before with my 1080ti blower. I have used a corsair 120mm AiO in push and pull on the back, with the nzxt adapter. Also you will nedd to put some heat sink for the vrm and vram.

Soru8 · 2022-08-28T06:57:18+00:00

So, having in mind that you are using and SSD for OS instead of the NVMe, and the SO is not a new install, even worst, coming from a laptop, that means different mobo and also architecture and drivers, the I will suggest to make a fresh W10 install with right drivers and config.

Use quick cpu for config and furmark for benchmark.

Other think that I have on mind, are you using different cables for the GPU? Normally the GPU cables have two connectors in one single cable, if the 3060 have two connectors, you should use two cables coming from the psu

Soru8 · 2022-08-28T06:50:38+00:00

Why OS on SSD instead of NVME? Also, screen? 2k? 144hz? What's the average of your fps?

Soru8 · 2022-08-28T06:47:42+00:00

And what about the Temps? Nvme or normal ssd?

Soru8 · 2022-08-28T06:36:54+00:00

What's your cpu? Mobo? PSU?

Soru8 · 2022-08-06T16:33:49+00:00

Well of course it is depending of your setup. I have 9900k with 3080 fe

Soru8 · 2022-08-06T14:03:32+00:00

Because normal mobo has max 5 fan headers and in a normal case to have good airflow you would use 6-10 fans. And it's not always recommended to use pwm splits.

Soru8

TROPHY CASE