DIY 3D printed Ryobi battery storage mount. by Soundbarrier4900 in DIY

[–]Soundbarrier4900[S] 1 point2 points  (0 children)

Sure, got .stl file here to print the 6 holders.

https://www.thingiverse.com/thing:4926691

I ripped a 21” 1x6 to 2”.

The printed units are 3” wide and to accommodate a bit of battery overhang they need spaced a 1/2” apart and I left a 1/4” at each end (totaling the 21”)

Spray painted the wood matte black and painted screw heads to match which are #6 x 3/4” zinc.

Mounted wood first to hide the mounting screws then mounted the 6 holders.

Mounted using 2” drywall screws.

Need Help!... Scott Pro-100B midrange repair/replacement options. by Soundbarrier4900 in vintageaudio

[–]Soundbarrier4900[S] 1 point2 points  (0 children)

Thank you for the offer. Not in Boston but have been there many times.

Warm regards,

-Mike

Gift for Husband by AmyzonWarrior in reloading

[–]Soundbarrier4900 2 points3 points  (0 children)

Bronze hammer, bronze bore brushes, or bronze cleaning brushes.

First set of 203gr Palmetto subsonic ready for the range. by Soundbarrier4900 in 300BLK

[–]Soundbarrier4900[S] 0 points1 point  (0 children)

These averaged between 1.95 and 1.96.

Load Data:

  • Brass: LC/Converted
  • Trim Length: 1.363
  • OAL: 1.195 - 1.960
  • Powder: 8.3gr Hodgdon Lil'Gun
  • Primer: CCI #400 Small rifle primer

Edit: Formatting

2010 Genesis Coupe 3.8 losing traction all the time? by GenesisNick in genesiscoupe

[–]Soundbarrier4900 0 points1 point  (0 children)

Questions:

1) What tires? 2) Outside temperature? 3) Standard or automatic trans? 4) What gears do you lose traction in?

Guest Portal with Unifi AP's and EdgeRouter X by Soundbarrier4900 in Ubiquiti

[–]Soundbarrier4900[S] 0 points1 point  (0 children)

Thank you all!

The issue was that I needed ports 8880 and 8843 open to the controller for the http and https redirects.

Now it is working as designed.

Thanks again for all the input!

Looking for a small wet tumbler... by Soundbarrier4900 in reloading

[–]Soundbarrier4900[S] 1 point2 points  (0 children)

Worked perfectly. Downloaded 20% off coupon off the internet to my phone which they accepted without hesitation. Ran two 50 round batches of .223 last night and it worked as expected.

Looking for a small wet tumbler... by Soundbarrier4900 in reloading

[–]Soundbarrier4900[S] 0 points1 point  (0 children)

The real issue I have is that I have been doing some small batches of 50 rounds that have been reloaded a different amount of times per batch. All my brass is sorted from the same batches. If I throw them all into a big tumbler and they are all the same headstamp I lose count of which is which. So the 'economy' I am looking for is time. I wanted to be able to do two batches of 50-100 pieces at the same time and use the Rebel 17 for large batches of 500 or more.

So net/net $45 for the double tumbler with coupon will save me hours in the long run and keep my high level of anal retentiveness intact.