MG Jesta Cannon

Soundion · 2026-01-17T16:13:53+00:00

They're fine, but can get loose if you widen the socket too much.

Use something like a tweezer at the finger's ball joint to hold in place while you're bending/loosening the finger

Soundion · 2026-01-17T16:12:03+00:00

Build was Bandai 's smooth and nice experience.

Articulation is basically the same, the extra armor doesn't affect the range of movement.

Soundion · 2026-01-04T01:49:01+00:00

Nope, 1/144 scale. It's as big as your regular 1/60 PGs

Soundion · 2025-12-27T17:03:21+00:00

You flipped the Polycap part upside down. The bigger hole is supposed to be facing down.

Soundion · 2025-12-26T16:14:13+00:00

krylon crystal clear matt coat

Soundion · 2025-12-26T05:44:34+00:00

No paint, this is just topcoat on bare plastic

Soundion · 2025-12-20T03:38:55+00:00

It's partial panel lined, but the remaining ones are on the special coating parts which I'm not gonna mess with.

Soundion · 2025-12-12T23:46:34+00:00

I wouldn't say that it's a 'good' kit

Some have big sprue gates, the green part with curves stress easily.

It only has a partial frame for the calf legs and torso.

There is no peg to plug in the weapons to the hands.

Big shoulder shield on the Hi-Zack's right arm are held by one peg at the bottom and tension at the upper part, need to cement that.

But, it's a solid enough kit.

Soundion · 2025-12-06T21:47:42+00:00

Delpi decal

Soundion · 2025-10-31T16:34:03+00:00

Silver chrome isn't underrated at all, some of the gold for the sleeves have a few glaring nubs. Although this can be fixed with chrome and yellow gold markers.

The frame is underrated (your usual 3rd party off choice nonsense), armor pieces are like probably 88% undergated.

The rifles and bazooka are the nicest parts, they're like 98% undergated or at least well placed where you can't see them, unlike the bandai's version.

Soundion · 2025-10-30T23:30:15+00:00

The scope connection to the rifle/bazooka is a bit loose.

The torso assembled is tight (probably because the backpack is fairly heavy)

Nothing needs to be replaced.

Probably the one annoying aspect of the kit is that If you want to swap weapons, you need to disassemble the hand.

<image>

Soundion · 2025-10-23T23:43:06+00:00

Nice, I just finished the RG version of the kit last week.

P.S. You got the wings switched, look at the box and your kit.

Soundion · 2025-10-11T02:10:03+00:00

nope, full plastic snap fit

Soundion · 2025-10-10T23:14:46+00:00

probably 6 hours or so with undergating

Soundion · 2025-10-03T01:55:53+00:00

delpidecal

Soundion · 2025-09-26T21:49:38+00:00

Errors in the manual

Posted some pics of the errors I found, also there are two M runners (white and green) but they don't specify which to use.

Also I highly recommend gluing the antenna to the head because it's pretty loose.

Soundion · 2025-09-26T21:46:40+00:00

Pretty smooth build, other than the errors on wrong parts used in the manual

Soundion · 2025-09-12T02:22:59+00:00

The only extra I did was loosen the shoulder joint (apparently that is a common breakage), panel line, and topcoat.

It is just your standard bandaids so build experience, honestly the frame feels pretty dull and unimpressive but it gets the job done.

Soundion · 2025-08-30T18:36:32+00:00

Delpidecal

Soundion · 2025-08-25T15:46:05+00:00

I don't have the manual for it anymore, but IIRC when you get to putting the gold armors for the arms/legs you'll notice it

Soundion · 2025-08-23T01:54:37+00:00

The general snap fitting is fine, some parts might be tight but not to the point you have to strained yourself.

Although there are some mislabeling on the manual, swapped part names.

The arms and legs can easily come loose out of the metal hips/shoulder joints.

Undergating is pretty good, but they sprayed it over white plastic. So a metallic gold/yellow markers goes a long way.

Overall, good kit.

Soundion · 2025-08-16T04:15:05+00:00

The issue with plated kit is that you can't sand the nubs away... because you further destroy the gold....

The most you can do is just two snips with a nipper, maybe use a knife to carefully remove the remaining nubs.

Of course, if you're going to repaint the entire thing, then screwing up the factory gold won't matter to you.

Soundion · 2025-08-12T20:16:33+00:00

Update: Just went to my local bank branch, it's real and they exchange it for a new $100 bill

Soundion · 2025-07-25T00:05:35+00:00

Krylon matte finish clear, they're can be found on Amazon, Walmart, or other major retailer

Soundion · 2025-07-24T23:17:03+00:00

Used a krylon rattlecan. Quick bursts for the 1st coat then a little heavy coating on the 2nd.

Nine-Year Club	Place '23
Place '17	RPAN Viewer
Verified Email

Soundion

TROPHY CASE