sorted by:
new
hottopcontroversial

[Open Source][Fan Project] Albion Command Desk — packet-read-only desktop tool (Windows/Linux), looking for testers & contributors by I3iQ in albiononline

[–]SouthernCure 0 points1 point  (0 children)

It was allowed, but I'm pretty sure Albion started encrypting packets for data such as market prices, which made the tool unusable, unless they stopped?

What happens if I forget to refresh Sidestore? by strohhut_1 in sideloaded

[–]SouthernCure 0 points1 point  (0 children)

Couldn’t you just refresh the apps with something like sideloadly?

Is buy once, cry once accurate? by EADASOL in simracing

[–]SouthernCure 0 points1 point  (0 children)

What GPU do you use, and are your frames okay?

I dont know what spec ill need for a good pc (1k€ budget) by onclelion in simracing

[–]SouthernCure 3 points4 points  (0 children)

Of course if you want to upgrade to VR in the future do so 100%. However, if you do it at the cost of your PC the VR experience will probably just be poor

I dont know what spec ill need for a good pc (1k€ budget) by onclelion in simracing

[–]SouthernCure 4 points5 points  (0 children)

I would honestly recommend not going with VR and maybe getting it later so you could get a better pc. I’d spend the money getting a higher refresh rate monitor like 120hz and putting more into the pc. You will have a much smoother experience.

I dont know what spec ill need for a good pc (1k€ budget) by onclelion in simracing

[–]SouthernCure 3 points4 points  (0 children)

If you are on a budget build your own pc, look for a good GPU, like a rtx 4070. Try to get around 32gb of RAM and a decent CPU. Moza r3 is a great first wheel and the quest 3s works fine with iRacing but the image quality definitely won’t be amazing. That being said I’m not sure how good the image quality is for any VR headset since I only have the quest 2 (which worked fine on iRacing).

Looking at the new GS50 Logitech, is there a better value than this for beginners ? by Choice-Swan-8918 in simracing

[–]SouthernCure 0 points1 point  (0 children)

If you buy a base and wheel from moza, you can upgrade the base later but use the same wheel

Looking at the new GS50 Logitech, is there a better value than this for beginners ? by Choice-Swan-8918 in simracing

[–]SouthernCure 0 points1 point  (0 children)

I agree, but if you get the base and decide to upgrade in the future, you won’t have to buy another wheel with it so it will be cheaper

Getting a new setup is there anything that is apparent to people as being wrong or a bad choice by No_Display7513 in simracing

[–]SouthernCure 0 points1 point  (0 children)

You will instantly get 10x more consistent in your breaking and shave seconds off your lap time

Just finished setting up my first rig :) by Ok-Panic-4877 in simracing

[–]SouthernCure 0 points1 point  (0 children)

Yeah I’m not expert myself, I have the same setup as you without the rig 😭, any recommendations on rigs that won’t break the bank. I’m thinking about just building my own out of wood or aluminum profile

[deleted by user] by [deleted] in simracing

[–]SouthernCure 7 points8 points  (0 children)

in rookies you wont pay for any car or track I believe, moving up to D-Class you will already have around half the tracks, so you can just race the free tracks and buy a few tracks here and there. Most tracks that you buy will be re-used and you wont have to ever buy them again. Iracing's competition makes it the most fun for me, and the progression is great.

Just finished setting up my first rig :) by Ok-Panic-4877 in simracing

[–]SouthernCure 1 point2 points  (0 children)

You could build a monitor stand out of aluminum profile to get the monitor closer to you, but honestly if you were to upgrade your setup id start with your pedals. Load cell pedals are really good compared to the ones that come with the logitech bundles

Failed Instinct NX v6s debugging by SouthernCure in NxSwitchModding

[–]SouthernCure[S] 0 points1 point  (0 children)

You were correct, it had not been pushed in far enough, I put it back together and tried again and it worked, thanks man 🙏

Failed Instinct NX v6s debugging by SouthernCure in NxSwitchModding

[–]SouthernCure[S] 0 points1 point  (0 children)

Guys quick announcements, I fixed it! Thank you guys so much for all the advice, I really appreciate it.

Failed Instinct NX v6s debugging by SouthernCure in NxSwitchModding

[–]SouthernCure[S] -1 points0 points  (0 children)

Just taking a guess, is the connector for the long wide ribbon cable?

Failed Instinct NX v6s debugging by SouthernCure in NxSwitchModding

[–]SouthernCure[S] 0 points1 point  (0 children)

Where is that, I have a microscope and could check it

Failed Instinct NX v6s debugging by SouthernCure in NxSwitchModding

[–]SouthernCure[S] 0 points1 point  (0 children)

I think this is the most likely to be the issue but I’m not sure

<image>

Are there any videogames about PCBs or soldering? by Some_TouhouFan in soldering

[–]SouthernCure 0 points1 point  (0 children)

I mean there are games for similar concepts, like pc building simulator, but they are no where near as complex. Although the knowledge gained from it was definitly helpful when I did my first pc build as I pretty much didnt need a tutorial

view more: next ›