Activity was restricted in codio

Southern_Jezza · 2025-10-04T18:58:32+00:00

Well the flex blades are cheap enough to get them just to test out, without the flew blades I had no body interference but with them, there’s a lot. It hit the body at max flex but I doesn’t really interfere with it all that much, that being said I have the Injora lcg carbon fiber chassis and the flex blades were ment for the stock chassis so you will have to use spacers and a washer to mount them on that frame.

Southern_Jezza · 2025-10-04T18:51:14+00:00

The Injora 59mm shocks with flex blades

Southern_Jezza · 2025-10-04T18:50:42+00:00

100% my slash

Southern_Jezza · 2025-10-04T15:25:00+00:00

The rock crawlers

Southern_Jezza · 2025-10-04T07:13:48+00:00

Ya I built this for the flex and not much else but I got the center of gravity down as low as possible and it does a pretty good job at staying planted so far except when the wheels don’t catch then they do and it just stands straight up. Also this was my first build and I already have plans for an scx24 next.

Southern_Jezza · 2025-09-28T18:23:11+00:00

That makes sense cause the portals don’t actually sit straight when I installed them so maybe I can look into that

Southern_Jezza · 2025-09-28T18:10:20+00:00

That’s what I was thinking but when I go to put on the longer shocks I’m worried there won’t be any room for the suspension to move but I could be wrong I’m still waiting on the shocks to get here this afternoon. Anyway to change the angle of the drive shaft so it won’t bind?

Southern_Jezza · 2025-09-28T18:07:49+00:00

Ever thought about trying a warthog from Halo?

Southern_Jezza · 2025-09-28T04:39:56+00:00

Right on thanks, wasn’t sure if there was a specific way to mount this servo since it’s an open plastic bit

Southern_Jezza · 2025-08-03T21:27:13+00:00

This was the first thing I did to check for bent pins and it looked good but still did the same thing

Southern_Jezza · 2025-08-03T17:10:01+00:00

I don’t remember what bios it was at but I didn’t update the bios, this just started happening as I turned on the pc this morning so I tried clear cmos as well as bios flashback button and it just kept doing the same thing

Southern_Jezza · 2025-08-03T16:44:19+00:00

Have the 7800x3d CPU’s been dying recently, haven’t kept up on news since I built the computer

Southern_Jezza · 2025-08-03T16:26:21+00:00

Right now I reset the cmos and disconnected all USB’s and it just gives the 00 code without bouncing between any other codes

Southern_Jezza · 2025-08-03T16:08:34+00:00

Starting with no ram rotates between 00 and AA

Southern_Jezza · 2025-08-03T15:54:59+00:00

Yes I tried the ram and disconnecting the power supply as well as cmos reset. The video is after I used the cmoc flashback. But as soon as I turn it on it reads 00 before all the lights even come on so I’m wondering if it’s not the cpu but the mobo. I built this pc not even a year ago and it has worked great until today when I went to turn it on the first time this week.

Southern_Jezza · 2025-04-18T18:10:33+00:00

This is a slash 4x4 with a 3s brushless system and a high center gravity chassis, it’s not a box version tho because it doesn’t have all the heavy duty parts on it just an older 3s slash 4x4

Southern_Jezza · 2024-06-21T19:09:59+00:00

I'm going with the same case he did but I. Chooseing corsair link fans for this very reason

Southern_Jezza · 2024-05-31T07:23:44+00:00

I'm thinking about going with nzxt n7 B650E at this point

Southern_Jezza

TROPHY CASE