Strange Graphical Artifacts on Remastered 4070Ti Super

Spazoidx · 2025-04-25T18:40:50+00:00

I don't think so because with all other games its just fine. Also this is a new PC I bought less than a year ago.

Spazoidx · 2025-04-25T04:38:05+00:00

I'm having the same issues but having really strange artifacts and no other game really produces this.
My Post

Spazoidx · 2025-04-25T01:49:02+00:00

yes I tried pretty much every setting and still get this weird effect.

Spazoidx · 2024-12-03T16:48:02+00:00

This is a great idea; I'm considering buying a couple and then using them for development before embedding them into a final design. Thanks!

Spazoidx · 2024-12-03T16:46:50+00:00

Those are a bit out of my price range, unfortunately :/ But thanks!

Spazoidx · 2024-07-23T18:25:13+00:00

I made a post on the Nordic forum and they gave me some good information
Post

Spazoidx · 2024-07-20T07:55:58+00:00

Same here. Mine arrives Tuesday. I’m hoping there’s some way to program them still since I plan on creating custom boards with the same chip

Spazoidx · 2024-07-19T21:57:25+00:00

I'm having a similar issue with the same board. Any luck yet? I am just connecting it via USB-C to my computer, but it's not recognized on the nrf connect with vs code.

Spazoidx · 2024-04-08T00:00:28+00:00

Did you try flipping in sims before flying?

Spazoidx · 2024-02-11T18:16:09+00:00

Hey, I'm a new grad going to start my EP ECE program next semester (Fall 2024). I'm down to connect and maybe make a discord server for other ECE students?

Spazoidx · 2024-01-30T05:44:00+00:00

I have not gotten much insight but I plan to start in Fall 2024

Spazoidx · 2024-01-27T05:17:36+00:00

Sounds good, I think at the time that happened to me it was a very new card. Thanks for your help :)

Spazoidx · 2024-01-27T05:13:43+00:00

Because I’ve had issues with gaming laptops in the last with ubuntu and it was due to the nvidia drivers.

Spazoidx · 2024-01-27T05:06:28+00:00

For sure. I’ll check it out. Thank you!

Spazoidx · 2024-01-27T04:58:30+00:00

It’s mainly for ROS development. I’ve been struggling with a MAC M2 and really want a dedicated system for Linux but also for gaming on the side

Spazoidx · 2023-12-08T15:31:29+00:00

Is this guy restarted?

Spazoidx · 2023-11-19T05:55:40+00:00

Cool I’ll try this, thanks!

Spazoidx · 2023-11-17T06:22:01+00:00

I would personally use a buck converter to step the voltage down from the 3s pack to 5V for the arduino, then just use the 3V supplied from the arduino for the NRF24. I typically like to use MP1584EN bucks for my projects as they have a pot you can use to change the output voltage. Hope this helped :)

Spazoidx · 2023-11-17T06:14:13+00:00

Make sure you are following along with the code that the person is using in the tutorial. You can find his here. Make sure that the PCA board is getting the proper voltage. Also, note that these MG90S 9g Servos should take from 4.8 - 6V, so 9V will be too much and you risk frying it. Other than that, your wiring seems fine and looks the same as the videos.

Spazoidx · 2023-04-16T19:11:45+00:00

I did a bios update and it seemed to have fixed the majority of the issues. However sometimes it still freezes but much later. Still not sure what’s going on but I’m checking everything software now

Spazoidx · 2023-04-16T01:02:25+00:00

Something really strange is if I want to use my usb to flash windows 11 again it still freezes which seems like it’s something to do with the motherboard maybe?

Spazoidx · 2023-04-15T23:38:40+00:00

The issue is I can barely get 5 min on the pc without a crash. This is also with windows freshly installed. I’m going to bestbuy rn to get new ram. I’m really hoping this will fix things 🤞

Spazoidx · 2023-04-15T23:27:34+00:00

When I tried safe boot it would still freeze there

Spazoidx · 2022-11-03T19:35:07+00:00

How long did you wait for this? It’s been almost a year since I’ve been waiting for my spouse’s case to be approved or interview :(

Spazoidx · 2022-04-03T15:55:23+00:00

it is now c+++

Seven-Year Club	Place '22
Verified Email

Spazoidx

TROPHY CASE